[asterisk-ss7] ss7 link not_aligned

[marek cervenka]

>> 1. set the subservice to auto
>
> ok
>
>> 2. remove ssn
>
> ok
>
>> 3. use zttool to see if your E1 link is displayed 'OK'
>
> I used to use zaptel with zttool, and E1 link was 'OK' (no alarms). Now dahdi-tool displays it 'OK' too.
>
>>
>> check for the point codes,
>
> our provider gave us the point codes, and I tried both, on hexa and decimal format.
>
>>
>> it should work.
>>
>> chan_ss7 does not work with dahdi use zaptel instead.
>
> vashkar, current i'm running chan_ss7 from svn trunk (rev 24), which seem to fix some compile issues with DAHDI.
> But if you are sure, I can try again zaptel. Must I downgrade from asterisk 1.4 to 1.2 again? Or asterisk-1.4 and zaptel is right?

i have working configuration:
dahdi 2.1.0.4, asterisk 1.6.1.1, chan_ss7 svn

---------------------------------------
Marek Cervenka
=======================================