[asterisk-ss7] Can not get ss7 link working on Siemens switch!!

[Matthew Fredrickson]

research at businesstz.com wrote:
> Hi Matthew
> 
> You were 100% correct on the 56k. I have disabled it and change the
> isup=16 to mtp2=16 and that solved my problem.
> 
> Question: is there a way of explicitly tells dahdi that it should use ISUP!?
> 
> Otherwise thank you for your advice

The configuration in /etc/dahdi/system.conf only configures layers up to 
MTP1/MTP2.

You set the ss7 signalling protocol selection (ISUP) in 
/etc/asterisk/chan_dahdi.conf

Matthew Fredrickson
Digium, Inc.