[asterisk-ss7] libss7 and Motorola MSC

[Rony Ron]

" These are messages from the switch:

Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, 
DPC : 0x708], Cause: SLTA_NOT_RECVD
Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, 
DPC : 0x708], Cause: SLTA_NOT_RECVD
Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE 
WITH LPC 0x708,RPC 0x3e8. DISCARDING..."

Hi,
Is this message from the operator's switch ?
Please tell me what's the pointcode of the operator's switch  ?
Just to verify that you did not cross the PCs (set the operators PC as yours and vice-versa);
regards,
2R



Florian Smeets a écrit :
> On 1/27/09 6:12 PM, Matthew Fredrickson wrote:
>   
>> Florian Smeets wrote:
>>     
>>> Hi
>>>
>>> i'm trying to connect a Motorola MSC to asterisk-1.6.1-beta4 + libss7 trunk.
>>>
>>> I'm using FreeBSD and dahdi-bsd, i know this is not supported and so on,
>>> but it almost works, and i would like to get it to work completely :-)
>>>
>>>       
>
> Sorry for following up so late, but i was finally able to gather the 
> requested information.
>
>   
>> Well, this is a random thought, but perhaps in the FreeBSD port, we are
>> not able to send out FISUs quick enough...  What does your FreeBSD
>> equivalent of /etc/dahdi/system.conf have in it?
>>     
>
> span=1,1,0,ccs,hdb3
> span=2,1,0,ccs,hdb3
> span=3,1,0,ccs,hdb3
> span=4,1,0,ccs,hdb3
> bchan=1-15,17-31
> mtp2=16
> loadzone = de
> defaultzone=de
>
>   
>> The real thing that would tell us a lot is to ask the switch at the
>> other end why it's dropping the link.
>>
>>     
>
> These are messages from the switch:
>
> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, 
> DPC : 0x708], Cause: SLTA_NOT_RECVD
> Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, 
> DPC : 0x708], Cause: SLTA_NOT_RECVD
> Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE 
> WITH LPC 0x708,RPC 0x3e8. DISCARDING...
>
> It seems that SLTMs are not answered correctly?! And the last message is 
> IMHO very confusing...
>
>   
>> So far, it looks like all the messages are good, point codes are
>> correct, etc.
>>
>>     
>
> Cheers,
> Florian
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>