[asterisk-ss7] testing throughput from Asterisk to AS5300 via SS7 over T1

[TCB]

AFAIK Cisco AS53X can only be SLT, it cant terminate any SS7, you would need
Softswitch like PGW, Squire etc.

On Tue, Aug 4, 2009 at 5:06 AM, jacque howard <jacque5115 at yahoo.com> wrote:

> Hi,
>
> I have the following gear:
>
> 2 IBM Xseries 300's running Asterisk 1.6.0.10 s, each equiped with a te205p
> (2 span T1 card).
> 2 AS5300's, each equipped with 48 voices.
>
> I'd like to eventually pump generated calls from one Asterisk box to the
> other - passing through the 2 gateways in between - and have them routed
> through the Dahdi channel using SS7 between Asterisk and AS5300.   I can
> find plenty information on how toconfigure SS7 on the Asterisk box and send
> it  out but I'm not clear on how a gateway (AS5300 in this case) receives
> it.
>
> I'm guessing a crossover T1 from one span on the te205p to a span on the
> AS5300???
> And then configuring inbound peers on gateway.  But do need to buy a SS7
> server/switch or can AS5300 terminate the SS7 signaling from Asterisk?
>
> Eternally grateful,
>
> Jacque Howard
>
> Anybody's tried this at all?
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>



-- 
TC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20090804/8c57da64/attachment.htm