[asterisk-ss7] chan_ss7, sangoma A104 to local telecom partner, but NOT_ALIGNED, MTP send fifo not ready, BLOCKED Local Hardware
Grant Arix
arix2dx2 at yahoo.fr
Mon Sep 29 13:20:31 CDT 2008
Hi,
use sltm=>no on the link side.
Good luck
--- En date de : Lun 29.9.08, asterisk-ss7-request at lists.digium.com <asterisk-ss7-request at lists.digium.com> a écrit :
> De: asterisk-ss7-request at lists.digium.com <asterisk-ss7-request at lists.digium.com>
> Objet: asterisk-ss7 Digest, Vol 43, Issue 35
> À: asterisk-ss7 at lists.digium.com
> Date: Lundi 29 Septembre 2008, 19h00
> Send asterisk-ss7 mailing list submissions to
> asterisk-ss7 at lists.digium.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> or, via email, send a message with subject or body
> 'help' to
> asterisk-ss7-request at lists.digium.com
>
> You can reach the person managing the list at
> asterisk-ss7-owner at lists.digium.com
>
> When replying, please edit your Subject line so it is more
> specific
> than "Re: Contents of asterisk-ss7 digest..."
>
>
> Today's Topics:
>
> 1. Does Sangoma 101 Card work on libss7 (mark morreny)
> 2. Re: Does Sangoma 101 Card work on libss7 (Anton)
> 3. Re: Does Sangoma 101 Card work on libss7 (Krzysztof
> Drewicz)
> 4. chan_ss7, sangoma A104 to local telecom partner, but
> NOT_ALIGNED, MTP send fifo not ready, BLOCKED Local
> Hardware
> (Robert Verspuy)
> 5. Re: chan_ss7, sangoma A104 to local telecom
> partner, but
> NOT_ALIGNED, MTP send fifo not ready, BLOCKED Local
> Hardware
> (Kristian Nielsen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 29 Sep 2008 09:59:36 +0800
> From: "mark morreny"
> <markmorreny at gmail.com>
> Subject: [asterisk-ss7] Does Sangoma 101 Card work on
> libss7
> To: asterisk-ss7 at lists.digium.com
> Message-ID:
> <20ad6b920809281859v1ee8759eq5ea20efe344f0247 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi,
>
> I have two Sangoma 101 cards that I would like to use to
> hook up two
> Asterisk. I tried with Asterisk 1.6 and libss7 but I
> can't get it to work.
>
> Does anyone know how to get it to work? I would greatly
> appreciate it if
> someone can share with me the config.
>
> Any help will be wonderful.
>
> Thanks in advance for your kindness.
>
> Mark
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080929/b3361ca3/attachment-0001.htm
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 29 Sep 2008 12:02:06 +0500
> From: Anton <anton.vazir at gmail.com>
> Subject: Re: [asterisk-ss7] Does Sangoma 101 Card work on
> libss7
> To: asterisk-ss7 at lists.digium.com
> Message-ID:
> <200809291202.06117.anton.vazir at gmail.com>
> Content-Type: text/plain; charset="iso-8859-6"
>
> As for DAHDI support, Sangoma should have it's support
> in
> the latest beta drivers. I did not try myself though, just
> got this info recently.
>
> On Monday 29 September 2008 06:59, mark morreny wrote:
> > Hi,
> >
> > I have two Sangoma 101 cards that I would like to use
> to
> > hook up two Asterisk. I tried with Asterisk 1.6 and
> > libss7 but I can't get it to work.
> >
> > Does anyone know how to get it to work? I would
> greatly
> > appreciate it if someone can share with me the config.
> >
> > Any help will be wonderful.
> >
> > Thanks in advance for your kindness.
> >
> > Mark
>
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 29 Sep 2008 09:14:23 +0200
> From: "Krzysztof Drewicz"
> <krzysztofdrewicz at gmail.com>
> Subject: Re: [asterisk-ss7] Does Sangoma 101 Card work on
> libss7
> To: asterisk-ss7 at lists.digium.com
> Message-ID:
> <9372a8330809290014y2e378068wae7d774db99f1f83 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> 2008/9/29 Anton <anton.vazir at gmail.com>:
> > As for DAHDI support, Sangoma should have it's
> support in
> > the latest beta drivers. I did not try myself though,
> just
> > got this info recently.
>
> Just turn off the hardhdlc, and put dchan in zapata/dahdi.
> Works for me.
>
>
>
> --
> Krzysztof Drewicz
> +48 504 17 55 77
>
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 29 Sep 2008 11:59:32 +0200
> From: Robert Verspuy <robert at exa-omicron.nl>
> Subject: [asterisk-ss7] chan_ss7, sangoma A104 to local
> telecom
> partner, but NOT_ALIGNED, MTP send fifo not ready, BLOCKED
> Local
> Hardware
> To: asterisk-ss7 at lists.digium.com
> Message-ID: <48E0A704.70502 at exa-omicron.nl>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> All,
>
> I'm trying to setup 2 SS7 links from one asterisk
> switch to out local
> telecom partner.
> I've installed libpri 1.4.7, zaptel 1.4.12, wanpipe
> 3.2.7.1, asterisk
> 1.4.21.2 and chan_ss7 1.0.95-beta
>
> I have two links, with both different peer endcodes.
> The wanrouter status gives me the status connected. (ignore
> port 3, it
> will be used for a ISDN-30 line when ss7 is working)
> When I freshly start Asterisk, I see the status
> "INSERVICE" for both
> links, but that switch to DOWN and NOT_ALIGNED within a few
> seconds,
> with a few warnings.
>
> calcium*CLI> ss7 link status
> linkset Rt, link a, schannel 16, sls 0, INSERVICE, rx: 3,
> tx: 3/3,
> sentseq/lastack: 3/3, total 55408, 55504
> linkset Ut, link b, schannel 16, sls 0, INSERVICE, rx: 4,
> tx: 3/3,
> sentseq/lastack: 3/3, total 55408, 55504
> [Sep 29 11:24:21] WARNING[2330]: mtp.c:940 timeout_sltm_t1:
> No SLTA
> received within Q.707 timer T1, trying again on link
> 'a'.
> [Sep 29 11:24:21] WARNING[2330]: mtp.c:940 timeout_sltm_t1:
> No SLTA
> received within Q.707 timer T1, trying again on link
> 'b'.
> [Sep 29 11:24:24] NOTICE[2330]: mtp.c:1040
> mtp2_process_lssu: Got status
> indication 'OS' while INSERVICE on link
> 'a'.
> [Sep 29 11:24:24] WARNING[2330]: chan_ss7.c:622
> process_event: MTP is
> now DOWN on link 'a'.
> [Sep 29 11:24:24] NOTICE[2330]: mtp.c:593 mtp_changeover:
> MTP changeover
> last_ack=4, last_sent=4, from schannel 16, no INSERVICE
> schannel found
> [Sep 29 11:24:24] NOTICE[2330]: mtp.c:597 mtp_changeover:
> Failover not
> possible, no other signalling link and no other host
> available.
> [Sep 29 11:24:24] NOTICE[2330]: mtp.c:1040
> mtp2_process_lssu: Got status
> indication 'OS' while INSERVICE on link
> 'b'.
> [Sep 29 11:24:24] WARNING[2330]: chan_ss7.c:622
> process_event: MTP is
> now DOWN on link 'b'.
> [Sep 29 11:24:24] NOTICE[2330]: mtp.c:593 mtp_changeover:
> MTP changeover
> last_ack=4, last_sent=4, from schannel 16, no INSERVICE
> schannel found
> [Sep 29 11:24:24] NOTICE[2330]: mtp.c:597 mtp_changeover:
> Failover not
> possible, no other signalling link and no other host
> available.
> calcium*CLI> ss7 link status
> linkset Rt, link a, schannel 16, sls 0, NOT_ALIGNED, rx: 1,
> tx: 3/4,
> sentseq/lastack: 127/127, total 137040, 137136
> linkset Ut, link b, schannel 16, sls 0, NOT_ALIGNED, rx: 1,
> tx: 3/4,
> sentseq/lastack: 127/127, total 137040, 137136
>
> After that all links have the status "Idle Reset
> pending BLOCKED Local
> Hardware".
>
> Several other warning I have after running "ss7
> reset"
> [Sep 29 11:25:17] WARNING[2349]: l4isup.c:396
> mtp_enqueue_isup_packet:
> MTP send fifo not ready.
> [Sep 29 11:25:41] WARNING[2330]: mtp.c:470 t2_timeout: MTP2
> timer T2
> timeout (failed to receive 'O', 'N', or
> 'E' after sending 'O'), initial
> alignment failed on link 'a'.
> [Sep 29 11:25:41] WARNING[2330]: mtp.c:470 t2_timeout: MTP2
> timer T2
> timeout (failed to receive 'O', 'N', or
> 'E' after sending 'O'), initial
> alignment failed on link 'b'.
> [Sep 29 11:25:47] NOTICE[2330]: l4isup.c:1236 t22_timeout:
> T22 timeout
> (No "circuit group reset acknowledge" from peer)
> CIC=1.
> [Sep 29 11:25:47] WARNING[2330]: l4isup.c:396
> mtp_enqueue_isup_packet:
> MTP send fifo not ready.
> [Sep 29 11:25:47] NOTICE[2330]: l4isup.c:1236 t22_timeout:
> T22 timeout
> (No "circuit group reset acknowledge" from peer)
> CIC=17.
> [Sep 29 11:25:47] WARNING[2330]: l4isup.c:396
> mtp_enqueue_isup_packet:
> MTP send fifo not ready.
>
> Does anyone have any idea where to start searching, or
> troubleshooting?
> Is it possible that the wanpipe drivers are not compiled
> correctly?
> (you've got a lot of options there).
> Should I also get the mtp3 daemon running? Can't find
> any information
> about when this mtp3 daemon is necessary.
>
> The only information the local telco could provide was:
> Networkindicator=3
> slc=0
>
> I asume the networkindicator is something like the
> subservice in the
> ss7.conf file?
> But I don't know what the slc value is..
>
> Thnx in advance!
>
> Regards,
> Robert Verspuy
>
> == wanrouter status ==
> > [root at calcium etc]# /etc/init.d/wanrouter status
> >
> > Devices currently active:
> > wanpipe1 wanpipe2 wanpipe3
> >
> >
> > Wanpipe Config:
> >
> > Device name | Protocol Map | Adapter | IRQ | Slot/IO
> | If's | CLK |
> > Baud rate |
> > wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8|
> 169 | 4 |
> > 1 | EXT | 0 |
> > wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8|
> 169 | 4 |
> > 1 | EXT | 0 |
> > wanpipe3 | N/A | A101/1D/A102/2D/4/4D/8|
> 169 | 4 |
> > 1 | EXT | 0 |
> >
> > Wanrouter Status:
> >
> > Device name | Protocol | Station | Status |
> > wanpipe1 | AFT HDLC | N/A | Connected |
> > wanpipe2 | AFT HDLC | N/A | Connected |
> > wanpipe3 | AFT HDLC | N/A | Connecting |
> == wanrouter status ==
>
> == /etc/zaptel.conf ==
> > loadzone=nl
> > defaultzone=nl
> >
> > #Sangoma A104 port 1 [slot:4 bus:8 span:1]
> <wanpipe1>
> > span=1,0,0,ccs,hdb3
> > bchan=1-31
> > #Sangoma A104 port 2 [slot:4 bus:8 span:2]
> <wanpipe2>
> > span=2,0,0,ccs,hdb3
> > bchan=32-62
> >
> > #Sangoma A104 port 3 [slot:4 bus:8 span:3]
> <wanpipe3>
> > span=3,0,0,ccs,hdb3
> > bchan=63-77,79-93
> > hardhdlc=78
> == /etc/zaptel.conf ==
>
> == /etc/wanpipe1.conf ==
> > [devices]
> > wanpipe1 = WAN_AFT_TE1, Comment
> >
> > [interfaces]
> > w1g1 = wanpipe1, , TDM_VOICE, Comment
> >
> > [wanpipe1]
> > CARD_TYPE = AFT
> > S514CPU = A
> > CommPort = PRI
> > AUTO_PCISLOT = NO
> > PCISLOT = 4
> > PCIBUS = 8
> > FE_MEDIA = E1
> > FE_LCODE = HDB3
> > FE_FRAME = NCRC4
> > FE_LINE = 1
> > TE_CLOCK = NORMAL
> > TE_REF_CLOCK = 0
> > TE_SIG_MODE = CCS
> > TE_HIGHIMPEDANCE = NO
> > LBO = 120OH
> > FE_TXTRISTATE = NO
> > MTU = 1500
> > UDPPORT = 9000
> > TTL = 255
> > IGNORE_FRONT_END = NO
> > TDMV_SPAN = 1
> > TDMV_DCHAN = 16
> > TDMV_HW_DTMF = NO
> >
> > [w1g1]
> > ACTIVE_CH = ALL
> > TDMV_ECHO_OFF = NO
> > TDMV_HWEC = YES
> == /etc/wanpipe1.conf ==
>
> == /etc/wanpipe2.conf ==
> >
> > [devices]
> > wanpipe2 = WAN_AFT_TE1, Comment
> >
> > [interfaces]
> > w2g1 = wanpipe2, , TDM_VOICE, Comment
> >
> > [wanpipe2]
> > CARD_TYPE = AFT
> > S514CPU = A
> > CommPort = PRI
> > AUTO_PCISLOT = NO
> > PCISLOT = 4
> > PCIBUS = 8
> > FE_MEDIA = E1
> > FE_LCODE = HDB3
> > FE_FRAME = NCRC4
> > FE_LINE = 2
> > TE_CLOCK = NORMAL
> > TE_REF_CLOCK = 0
> > TE_SIG_MODE = CCS
> > TE_HIGHIMPEDANCE = NO
> > LBO = 120OH
> > FE_TXTRISTATE = NO
> > MTU = 1500
> > UDPPORT = 9000
> > TTL = 255
> > IGNORE_FRONT_END = NO
> > TDMV_SPAN = 2
> > TDMV_DCHAN = 16
> > TDMV_HW_DTMF = NO
> >
> > [w2g1]
> > ACTIVE_CH = ALL
> > TDMV_ECHO_OFF = NO
> > TDMV_HWEC = YES
> == /etc/wanpipe2.conf ==
>
> == /etc/asterisk/ss7.conf ==
> > [linkset-Rt]
> > enabled => yes ; The
> linkset is enabled
> > enable_st => no ; The
> end-of-pulsing (ST) is
> > not used to determine when incoming address is
> complete
> > use_connect => yes ; Reply
> incoming call with CON
> > rather than ACM and ANM
> > hunting_policy => even_mru ; The CIC
> hunting policy
> > (even_mru, odd_lru, seq_lth, seq_htl) is even CIC
> numbers, most
> > recently used
> > context => from-ss7 ; Incoming calls are
> placed in the ss7
> > context in the asterisk dialplan
> > language => nl ; The
> language for this
> > context is da
> > subservice => 3 ; The
> subservice field:
> > national (8), international (0), auto or decimal/hex
> value
> > ; The auto
> means that the
> > subservice is obtained from first received SLTM
> >
> > [linkset-Ut]
> > enabled => yes ; The
> linkset is enabled
> > enable_st => no ; The
> end-of-pulsing (ST) is
> > not used to determine when incoming address is
> complete
> > use_connect => yes ; Reply
> incoming call with CON
> > rather than ACM and ANM
> > hunting_policy => even_mru ; The CIC
> hunting policy
> > (even_mru, odd_lru, seq_lth, seq_htl) is even CIC
> numbers, most
> > recently used
> > context => from-ss7 ; Incoming calls are
> placed in the ss7
> > context in the asterisk dialplan
> > language => nl ; The
> language for this
> > context is da
> > subservice => 3 ; The
> subservice field:
> > national (8), international (0), auto or decimal/hex
> value
> > ; The auto
> means that the
> > subservice is obtained from first received SLTM
> >
> > [link-a]
> > enabled => yes ; The link
> is enabled
> > linkset => Rt ; This link
> belongs to linkset siuc
> > channels => 1-15,17-31 ; The
> speech/audio circuit
> > channels on this link
> > schannel => 16 ; The
> signalling channel
> > firstcic => 1 ; The first
> CIC
> >
> > [link-b]
> > enabled => yes ; The link
> is enabled
> > linkset => Ut ; This link
> belongs to linkset siuc
> > channels => 1-15,17-31 ; The
> speech/audio circuit
> > channels on this link
> > schannel => 16 ; The
> signalling channel
> > firstcic => 1 ; The first
> CIC
> >
> > [host-calcium]
> > enabled => yes ; The host
> is enabled
> > opc => 12 ; The point
> code for this SS7
> > signalling point is 0x8e0
> > dpc => Rt:34,Ut:56 ; The destination
> point (peer) code is
> > 0x3fff for linkset siuc
> > links => a:1,b:2 ; Syntax: links
> =>
> > link-name:digium-connector-no
> > ; The links on
> the host is
> > 'l1', connected to span/connector #1
> > if-1=127.0.0.1
> > default_linkset => Rt
> == /etc/asterisk/ss7.conf ==
>
>
> --
> *Exa-Omicron*
> Patroonsweg 10
> 3892 DB Zeewolde
> Tel.: 088-OMICRON (66 427 66)
> http://www.exa-omicron.nl
>
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 29 Sep 2008 12:26:53 +0200
> From: Kristian Nielsen <knmeister at gmail.com>
> Subject: Re: [asterisk-ss7] chan_ss7, sangoma A104 to local
> telecom
> partner, but NOT_ALIGNED, MTP send fifo not ready, BLOCKED
> Local
> Hardware
> To: asterisk-ss7 at lists.digium.com
> Message-ID: <87vdwf9riq.fsf at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> Robert Verspuy <robert at exa-omicron.nl> writes:
>
> > [Sep 29 11:24:21] WARNING[2330]: mtp.c:940
> timeout_sltm_t1: No SLTA
> > received within Q.707 timer T1, trying again on link
> 'a'.
>
> This has been covered in several threads in the past, you
> might want to check
> the archives.
>
> In short, the other end is not properly doing the SLTR/SLTA
> part of
> SS7. Either disable slta checking on your end, or get the
> other end to enable
> it.
>
> - Kristian.
>
>
>
> ------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> End of asterisk-ss7 Digest, Vol 43, Issue 35
> ********************************************
More information about the asterisk-ss7
mailing list