[asterisk-ss7] Re; LibSS7 issue-Almost there

[Sriram]

Hi...

Ok Matt...but explain me if i do a "vi /var/log/asterisk/messages" ....i see chan_dahdi.c : Detected Alarm on Channel 1 : Red Alarm ...this continues till Channel 31 ...Are you still sure that its a problem from operator end cos last time when i posted the message :

--------------------------------------------------------------------------------

Sriram wrote:
> Thanks ! now chan_dahdi.so was seen under the modules of asterisk..but 
> another prob :(  whenver i get to asterisk CLI and give the module load 
> chan_dahdi.so ...it exits with the following error :
>  
> Unable to load chan_dahdi.so , command 'module load chan_dahdi.so' 
> failed...the debug msg shows :
>  
> [sep 14 03:52:06] WARNING[30185]:chan_dahdi.c:4290 
> handle_alarms:Detected alarm on channel 1:Red Alarm --registered channel 
> 1, ss7 signalling
>  
> i see this till channel 15 after which it exits saying cant set sigchan 
> on channel 16....the operator is still doing some chnages at his end but 
> i just want to confirm if this is some issue at his end or my end
>  
> thanks- sriram

That is an issue with your end.  Make sure you signalling is set to 
either mtp2 (if it's a Digium card) or dchan if it's not in 
/etc/dahdi/system.conf.

Matthew Fredrickson

--------------------------------------------------------------------------------you replied as above but at that time i wasnt getting chan_dahdi.so to load which is not the case this time around...Please confirm so that i ask the operatorand tell him that i dont get SIO or SIOS messagesthnks a tonSriram
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080916/6354d2de/attachment.htm