[asterisk-ss7] Alarm cleared on link

Matthew Fredrickson creslin at digium.com
Mon Mar 24 09:45:00 CDT 2008

Elkhomeini wrote:
> Hi for all, 
> I checked zaptel-trunk, libss7 & asterisk-trunk from digium
> , installed them all successfully, executed asterisk with
> the SS7 link connected, it runs all fine (the CLI prompt appears showing
> Asterisk ready) but no calls received rather these Notices  one error:
>   Asterisk Ready.
> *CLI> [Mar 7 07:33:13] ERROR[3667]: chan_zap.c:8482 ss7_linkset: Alarm cleared on
> link
>   How I can solved this probleme ?

Have you verified that your linkset configuration is correct and your 
link successfully aligns using ss7linktest program in libss7?

If it is working and aligning correctly, then please post the output of 
`ss7 debug linkset x` where x is the linkset number of your linkset when 
an incoming call comes.

Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.

More information about the asterisk-ss7 mailing list