[asterisk-ss7] Help with libss7 configuration

[Anton]

Is it only with DIGIUM cards or it works so with SANGOMA 
CARDS too? Anyone tried?

On Thursday 10 July 2008 12:23, Mark Wilkinson wrote:
> Hi Matthew,
>
> I've just tested the latest svn version with 'mtp2'
> instead of 'dchan' and my looped back linksets
> come up without any problems.
>
> Regards
> Mark Wilkinson.
>
> Matthew Fredrickson wrote:
> > TCB wrote:
> >> I could not get C7 to get up with mtp2= on dahdi,
> >> works fine with the good ol' dchan. Feel free to try.
> >
> > Just to let you guys know, I just fixed a bug that
> > another developer introduced into the mtp2 code in
> > DAHDI last night.  If you update your DAHDI version to
> > something newere, it should work now.
> >
> > Matthew Fredrickson
> >
> >> On Tue, Jul 8, 2008 at 9:03 AM, Mark Wilkinson
> >>
> >> <mark.wilkinson at 2pmtech.com> wrote:
> >>> Hello,
> >>>    I'm looking for some help configuring a system to
> >>> test Asterisk's SS7 setup.
> >>>
> >>> I want to have one system setup with two linksets and
> >>> a T1 cross-over cable between 2
> >>> ports on a TE410P (If this will work).
> >>>
> >>> At present, I have the following configured :-
> >>>
> >>> OS: CentOS 5
> >>> LibPRI, LibSS7, Dahdi, Asterisk : All from svn trunk
> >>>
> >>> I'm pretty sure I have the dahdi config setup
> >>> correctly, as ports are shown as up and OK, but
> >>> I think I have a problem with the ss7 configuration
> >>> as the linksets remain down.
> >>>
> >>> Can anyone point me in the right direction or tell me
> >>> if it's even possible to set up Asterisk & SS7
> >>> like this ?
> >>>
> >>> Thanks In Advance
> >>> Mark.
> >>>
> >>> Current config files are as follows :-
> >>>
> >>> /etc/dahdi/system.conf
> >>> oadzone=uk
> >>> defaultzone=uk
> >>>
> >>> span=1,1,0,ccs,hdb3
> >>> bchan=1-15,17-31
> >>> mtp2=16
> >>>
> >>> span=2,0,0,ccs,hdb3
> >>> bchan=32-46,48-62
> >>> mtp2=47
> >>>
> >>>
> >>> /etc/asterisk/chan_dahdi.conf
> >>> [trunkgroups]
> >>>
> >>> [channels]
> >>> switchtype=euroisdn
> >>> usecallerid=yes
> >>> callwaiting=yes
> >>> usecallingpres=yes
> >>> callwaitingcallerid=yes
> >>> threewaycalling=yes
> >>> transfer=yes
> >>> canpark=yes
> >>> cancallforward=yes
> >>> callreturn=yes
> >>> echocancel=yes
> >>> echocancelwhenbridged=yes
> >>>
> >>> group=1
> >>> callgroup=1
> >>> pickupgroup=1
> >>>
> >>>
> >>> signalling = ss7
> >>> ss7type = itu
> >>>
> >>> ss7_called_nai=dynamic
> >>> ss7_calling_nai=dynamic
> >>>
> >>> networkindicator=international
> >>>
> >>> ; port 1
> >>> linkset = 1
> >>>
> >>> group = 1
> >>> signalling=ss7
> >>> ss7type = itu
> >>> context = default
> >>>
> >>> pointcode = 2
> >>> adjpointcode = 1
> >>> defaultdpc = 1
> >>>
> >>> networkindicator = international
> >>>
> >>> cicbeginswith = 1
> >>> channel => 1-15
> >>> cicbeginswith = 17
> >>> channel => 17-31
> >>> sigchan = 16
> >>>
> >>> ; Port 2
> >>>
> >>> linkset = 2
> >>> group = 2
> >>> signalling = ss7
> >>> ss7type = itu
> >>> context = default
> >>> pointcode = 1
> >>> adjpointcode = 2
> >>> defaultdpc = 2
> >>> networkindicator = international
> >>> cicbeginswith = 1
> >>> channel = 31-46
> >>> cicbeginswith = 17
> >>> channel = 48-62
> >>> sigchan = 47
> >>>
> >>>
> >>> _______________________________________________
> >>> --Bandwidth and Colocation Provided by
> >>> http://www.api-digital.com--
> >>>
> >>> asterisk-ss7 mailing list
> >>> To UNSUBSCRIBE or update options visit:
> >>>  
> >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by
> > http://www.api-digital.com--
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7