[asterisk-ss7] LIBSS7 channels map problem.

[Matthew Fredrickson]

Grant Arix wrote:
> Hi everybody,
> 
> I installed Libss7 and it works fine. However i think i have a little problem with zapata channels map.
> 
> In fact, I've got 2 E1s port on digium card. Below the channels map.
> 
> //first E1 port
> 
> cicbeginwith = 1
> channel =1-15
> cicbeginwith = 17
> channel =17-31
> sigchan = 16
> 
> // Second E1 port
> 
> cicbeginwith = 33
> channel =33-47
> cicbeginwith = 49
> channel =49-63
> sigchan = 48
> 
> but when i launch my asterisk, he says that he can't open the 63th channel.  And anyway the channels from 33-62 are "In service".
> 
> Can you tell where this problem come from ?

Zap/63 would be on the third E1 on the system.  Are you running 3 E1s in 
your SS7 setup?

Just for reference, Zap/1-Zap/31 is the first E1 and Zap/32-Zap/62 would 
be the second E1.

-- 
Matthew Fredrickson
Software/Firmware Engineer
Digium, Inc.