[asterisk-ss7] ERROR linkset_addsigchan

[Everton Goularth]

Hi ALL,

This configuration "signalling=s7" was just a write error, in my 
zapata.conf I have written "signalling=ss7".
When I had installed the sources, I have download libpri, libss7 and 
asterisk from svn, and zaptel from http://www.govarion.com/tor3/. Now I 
remove this sources and make again. I downloaded just libss7 and 
asterisk from trunk svn, and at this time I downloaded libpri from 
www.asterisk.org/downloads, and now all seems work fine. I will do more 
tests, and if some thing doesn`t work well I will post again. Thank`s 
for your help Joseph.

Everton Goularth



Joseph wrote:
> On 02/09/08, Everton Goularth wrote:
>   
>> Thank's Joseph for the suggestion,
>>
>> but I have already looked at both (zaptel and zapata) samples config files.
>>
>> As a mater of fact, my dchan for my first E1 is the channel 16, and because this I'm
>>  think that is something strange. "ztcfg -vv" doesn't show me any error.
>>
>> I'm not using a digium card, I'm using Tormenta card with 4 E1 ports.
>> (http://www.govarion.com/index.php?main_page=product_info&products_id=1&zenid=ab3abadc9d3f2bf11a620f24b89970ae)
>>
>> My config files:
>>
>> zaptel.conf:
>> -------------------------------
>> defaultzone=br
>> loadzone=br
>>
>> span=1,0,0,ccs,hdb3
>> bchan=1-15
>> dchan=16
>> bchan=17-31
>> -------------------------------
>>
>> zapata.conf
>> -------------------------------
>> [channels]
>> language=br
>> context=ss7
>> switchtype=eurisdn
>> nfs=none
>> signalling=s7
>>     
>
> This should be: signalling = ss7
>
>   
>> group = 1
>> ss7type = itu
>> linkset= 1 
>> pointcode = XXX
>> adjpointcode = YYYY
>> defaultdpc = YYYY
>> cicbeginwith = 1
>> networkindicator = national
>> sigchan = 16
>> channel = 1-15
>> channel = 17-31
>>     
>
> Not sure if this matters, but should channels not be: "channel => 1-15"
> instead of "channel = 1-15"
>
>
> Do you have debug turned on in your logger.conf for console and logged
> messages?
>
>   console => notice,warning,error,debug
>   messages => notice,warning,error,debug
>
> If possible, it would be good if you could turn debugging on, at the
> remote ss7 as well, or have someone watch to see what is happening.
> Also, if possible, get a digium card to test with in case hardware is an
> issue. I did not have any success getting a 56k circuit to work.
> However a 64 bit works fine.
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080211/148a6eee/attachment.htm