[asterisk-ss7] How to configure chan_ss7 to use a STP

[TCB]

I believe this kind of setup is not possible with chan_ss7/yate-ss7 i have
tested these two. I have
it working fine with libss7 though. You have 2 PCs from Telco, one is for
the adjacentdpc (STP) and
the other is the default for you ISUP trunks (possibly the destination MSC
where voice calls originate or go to).

regards

TC

On Feb 9, 2008 9:20 AM, Goke Aruna <goksie at gmail.com> wrote:

> Joseph wrote:
> > On 02/08/08, Grant Arix wrote:
> >> Hi everyone,
> >>
> >> Am trying to connect an MSC with chan_ss7. But The operator give two
> points codes.
> >>
> >> How can be possible to configure the both.
> >
> > lib_ss7 works with an MSC for me.
> >
> > Perhaps one is your gateway and one is the real MSC.
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> on ss7 connection  you need 2 points codes (am not an expert).
>
> originating point code OPC and Destination Point Code DPC.
>
> just understand what you want to do well.
>
> good luck.
>
> goksie
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>



-- 
TC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080209/a003c030/attachment-0001.htm