[asterisk-ss7] Starting with SS7. Channel-Configuration

[Vernier Umali]

It appears that way.

On 10/9/07, Tobias Wolf <tobias.wolf at evision.de> wrote:
> Hi,
>
> Vernier Umali schrieb:
> > If you do a zrcfg -vvvvv, you would have errors in channels after 48
> > since T1 only supports 24 channels per port.
> >
> Ok, so if ztcfg shows that 31 channels were configured, as seen below
>
> Zaptel Version: 1.4.5.1
> Echo Canceller: MG2
> Configuration
> ======================
>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
> Channel map:
>
> Channel 01: D-channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: Clear channel (Default) (Slaves: 03)
> Channel 04: Clear channel (Default) (Slaves: 04)
> Channel 05: Clear channel (Default) (Slaves: 05)
> Channel 06: Clear channel (Default) (Slaves: 06)
> Channel 07: Clear channel (Default) (Slaves: 07)
> Channel 08: Clear channel (Default) (Slaves: 08)
> Channel 09: Clear channel (Default) (Slaves: 09)
> Channel 10: Clear channel (Default) (Slaves: 10)
> Channel 11: Clear channel (Default) (Slaves: 11)
> Channel 12: Clear channel (Default) (Slaves: 12)
> Channel 13: Clear channel (Default) (Slaves: 13)
> Channel 14: Clear channel (Default) (Slaves: 14)
> Channel 15: Clear channel (Default) (Slaves: 15)
> Channel 16: Clear channel (Default) (Slaves: 16)
> Channel 17: Clear channel (Default) (Slaves: 17)
> Channel 18: Clear channel (Default) (Slaves: 18)
> Channel 19: Clear channel (Default) (Slaves: 19)
> Channel 20: Clear channel (Default) (Slaves: 20)
> Channel 21: Clear channel (Default) (Slaves: 21)
> Channel 22: Clear channel (Default) (Slaves: 22)
> Channel 23: Clear channel (Default) (Slaves: 23)
> Channel 24: Clear channel (Default) (Slaves: 24)
> Channel 25: Clear channel (Default) (Slaves: 25)
> Channel 26: Clear channel (Default) (Slaves: 26)
> Channel 27: Clear channel (Default) (Slaves: 27)
> Channel 28: Clear channel (Default) (Slaves: 28)
> Channel 29: Clear channel (Default) (Slaves: 29)
> Channel 30: Clear channel (Default) (Slaves: 30)
> Channel 31: Clear channel (Default) (Slaves: 31)
>
> 31 channels configured.
>
> When the Jumper on the card are correctly configured for E1, and the
> reason for the RED alarm seem to originate of another physical problem
> and not in the configuration of the card, right ?
>
> Regards,
>
> --
>
>   Tobias Wolf
>
>   Leiter Softwareentwicklung / Kommunikationslösungen
>
>   Evision GmbH
>
>
>
>   Wittekindstr. 105
>
>   44139 Dortmund
>
>   Tel: +49 (0)231 - 47790 307
>
>   Fax: +49 (0)231 - 47790 500
>
>   http://www.evision.de
>
>
>
> This electronic mail transmission and any accompanying attachments
> contain confidential information intended only for the use of the
> individual or entity named above. Any dissemination, distribution,
> copying or action taken in reliance on the contents of this
> communication by anyone other than the intended recipient is strictly
> prohibited. If you have received this communication in error
> please immediately delete the E-mail and notify the sender at the
> above E-mail address. Thank you.
> Hövener & Trapp Evision GmbH, Dortmund - HRB Nr.12477, Registergericht
> Dortmund - Geschäftsführer Christoph Begall
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>