[asterisk-ss7] Re: asterisk-ss7 Digest, Vol 27, Issue 16

Andrew Somov asomov12 at yahoo.co.uk
Thu May 31 09:28:19 MST 2007


Hi, the problem is gone and everything is working well and stable as soon as I changed an opc and dpc into decimal format. 
And I think the zttranscode is in use by chan_zap for codecs transcoding:

CLI>ss7 version
chan_ss7 version 0.9+ss7.pl+autopc

/sbin/lsmod
Module                  Size  Used by
zttranscode            12552  0
tor3e                  89116  0
zaptel                186532  184 zttranscode,tor3e
crc_ccitt               6209  1 zaptel

Thank you All

----- Original Message ----
From: "asterisk-ss7-request at lists.digium.com" <asterisk-ss7-request at lists.digium.com>
To: asterisk-ss7 at lists.digium.com
Sent: Thursday, 31 May, 2007 3:13:21 PM
Subject: asterisk-ss7 Digest, Vol 27, Issue 16

Send asterisk-ss7 mailing list submissions to
    asterisk-ss7 at lists.digium.com

To subscribe or unsubscribe via the World Wide Web, visit
    http://lists.digium.com/mailman/listinfo/asterisk-ss7
or, via email, send a message with subject or body 'help' to
    asterisk-ss7-request at lists.digium.com

You can reach the person managing the list at
    asterisk-ss7-owner at lists.digium.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-ss7 digest..."


Today's Topics:

   1. RES: asterisk-ss7 Digest, Vol 27, Issue 15
      (Virmones P.T de Miranda)
   2. Core dump in chan_ss7 -- here's the backtrace
      (Juan Carlos Castro y Castro)
   3. Re: Core dump in chan_ss7 -- here's the backtrace (Robert Kenton)


----------------------------------------------------------------------

Message: 1
Date: Wed, 30 May 2007 20:26:39 -0300
From: "Virmones P.T de Miranda" <virmones.tavares at govoip.com.br>
Subject: [asterisk-ss7] RES: asterisk-ss7 Digest, Vol 27, Issue 15
To: <asterisk-ss7 at lists.digium.com>
Message-ID: <001301c7a311$faab2480$0401010a at FOMICIANOGOVOIP>
Content-Type: text/plain;    charset="us-ascii"

Iam solve this problem, after 2 days just using:
 rmmod zttranscode




-----Mensagem original-----
De: asterisk-ss7-bounces at lists.digium.com
[mailto:asterisk-ss7-bounces at lists.digium.com] Em nome de
asterisk-ss7-request at lists.digium.com
Enviada em: quarta-feira, 30 de maio de 2007 19:19
Para: asterisk-ss7 at lists.digium.com
Assunto: asterisk-ss7 Digest, Vol 27, Issue 15

Send asterisk-ss7 mailing list submissions to
    asterisk-ss7 at lists.digium.com

To subscribe or unsubscribe via the World Wide Web, visit
    http://lists.digium.com/mailman/listinfo/asterisk-ss7
or, via email, send a message with subject or body 'help' to
    asterisk-ss7-request at lists.digium.com

You can reach the person managing the list at
    asterisk-ss7-owner at lists.digium.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-ss7 digest..."


Today's Topics:

   1. Tormenta TOR3 card Asterisk chan_ss7 (Andrew Somov)
   2. Re: Tormenta TOR3 card Asterisk chan_ss7 (Robert Kenton)


----------------------------------------------------------------------

Message: 1
Date: Wed, 30 May 2007 20:21:49 +0000 (GMT)
From: Andrew Somov <asomov12 at yahoo.co.uk>
Subject: [asterisk-ss7] Tormenta TOR3 card Asterisk chan_ss7
To: asterisk-ss7 at lists.digium.com
Message-ID: <240724.13787.qm at web26603.mail.ukl.yahoo.com>
Content-Type: text/plain; charset=ascii

Tormenta TOR3 card Asterisk chan_ss7 problem. SS7 link is flupping, Need
help!!!

I was trying to interconnect with several providers, the result was the
same. The link is going up for a several seconds, then 

failed with strings bellow. The channel was compiled without errors and
asterisk has started with no warnings.

Asterisk-1.2.18, chan_ss7 - 0.9 , chan_oh323, CentOS4.4 2.6.9-48.ELsmp,
the zaptel tor3e driver was pulled from http://www.govarion.com/tor3/,
the server is dual Intel(R) Xeon(TM) CPU 3.06GHz stepping
09(hyperthreading on).



This issue is quite close to 
http://lists.digium.com/pipermail/asterisk-ss7/2006-July/000410.html  
and 

http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_n
oise.html

I was explored through all and still have the same result.



Getting this error while trying to connect to the provider (DMS switch). the
ss7 link status dives:

linkset testlink, link l1, schannel 16, INSERVICE, rx: 5, tx: 3/3,
sentseq/lastack: 3/3, total  33458560,  33458624

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=1, typ=UBL message discarded.

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=2, typ=UBL message discarded.

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=3, typ=UBL message discarded.

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=4, typ=UBL message discarded.

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=5, typ=UBL message discarded.

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=6, typ=UBL message discarded.

May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
Group reset still in progress for CIC=7, typ=UBL message discarded.
etc. (cut)

May 30 16:48:15 WARNING[12951]: mtp.c:791 timeout_sltm_t1: No SLTA received
within Q.707 timer T1, trying again on link 'l1'.

May 30 16:48:24 ERROR[12951]: mtp.c:796 timeout_sltm_t1: No SLTA received
within Q.707 timer T1, faulting link on link 'l1'.

May 30 16:48:24 WARNING[12951]: chan_ss7.c:636 monitor_main: MTP is now DOWN
on link 'l1'.

May 30 16:48:24 NOTICE[12951]: mtp.c:502 mtp_changeover: MTP changeover
last_ack=3, last_sent=3, from schannel 16, no INSERVICE schannel found

May 30 16:48:24 NOTICE[12951]: mtp.c:506 mtp_changeover: Failover not
possible, no other signalling link and no other host available.

testlink*CLI> ss7 link status

linkset testlink, link l1, schannel 16, DOWN, rx: 2, tx: 4/4,
sentseq/lastack: 3/4, total  33467808,  33467872

testlink*CLI> ss7 link status

linkset testlink, link l1, schannel 16, NOT_ALIGNED, rx: 0, tx: 1/4,
sentseq/lastack: 127/127, total  35673520,  35673584

May 30 16:49:40 WARNING[12951]: mtp.c:424 t2_timeout: MTP2 timer T2
timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial
alignment failed on link 'l1'.



My /etc/asterisk/zapata.conf is empty, 

cat /etc/zaptel.conf gives

span=1,1,0,ccs,hdb3

bchan=1-31

span=2,2,0,ccs,hdb3

bchan=32-62

span=3,3,0,ccs,hdb3

bchan=63-93

span=4,4,0,ccs,hdb3

bchan=94-124

loadzone = uk

defaultzone = uk



cat /etc/asterisk/ss7.conf :



[linkset-testlink]

enabled => yes

enable_st => no

use_connect => no

hunting_policy => even_mru

;t35 => 15000,timeout

subservice => 8

context => default

language => en



[link-l1]

linkset => testlink

enabled => yes

channels => 1-15,17-31

schannel => 16

firstcic => 1



[link-l2]

linkset => testlink

enabled => yes

channels => 1-15,17-31

schannel =>

firstcic => 33



[link-l3]

enabled => yes

linkset => testlink

channels => 1-15,17-31

schannel =>

firstcic => 65



[link-l4]

enabled => no

linkset => testlink

channels => 1-15,17-31

schannel =>

firstcic => 97



[host-host.domain.com]

enabled => yes

default_linkset => testlink

;autopc => yes

opc => 0x27f2 ;13131

dpc => testlink:0x3b48 ;->provider1  (0x334b ;-> provider2)

if-1 => my.host.ip.addr

links => l1:1,l2:2,l3:3,l4:4



/sbin/lsmod

Module                  Size  Used by

zttranscode            12552  0

tor3e                  89116  0

zaptel                186532  184 zttranscode,tor3e

crc_ccitt               6209  1 zaptel

md5                     8129  1

ipv6                  243425  30

autofs4                25413  0

sunrpc                143909  1

button                 10705  0

battery                12997  0

ac                      8901  0

hw_random               9685  0

e1000                 119249  0

floppy                 58193  0

ata_piix               19141  0

libata                105757  1 ata_piix

sg                     38369  0

dm_snapshot            21093  0

dm_zero                 6337  0

dm_mirror              31173  0

ext3                  119113  2

jbd                    59609  1 ext3

dm_mod                 64617  8 dm_snapshot,dm_zero,dm_mirror

aic79xx               187613  5

sd_mod                 20545  9

scsi_mod              119757  4 libata,sg,aic79xx,sd_mod



cat /proc/interrupts gives shows that tor3e IRQ 217 is in the different CPU
from the eth0 network card:



           CPU0       CPU1       CPU2       CPU3

  0:    2981832    2911004    2910992    2904442    IO-APIC-edge  timer

  1:          8         69         50          0    IO-APIC-edge  i8042

  8:          1          0          0          0    IO-APIC-edge  rtc

  9:          9          0          0          0   IO-APIC-level  acpi

185:         30          0          0          0   IO-APIC-level  aic79xx

193:       4999       1944       3374       8368   IO-APIC-level  aic79xx

201:      52790          0          0          0   IO-APIC-level  eth0

217:          0    5284112    5280614      20005   IO-APIC-level  tor3e

NMI:          0          0          0          0

LOC:   11708215   11708091   11708090   11708212

ERR:          0

MIS:          0



#lspci -vb gives me the output bellow. (On IRQ 9 there are olso RAID bus,
ethernet, and I mentioned there is no latency)

#lspci -v gives IRQ 217, proved that APIC is running and it is unique.

03:0a.0 Bridge: PLX Technology, Inc.: Unknown device d44d (rev 01)

        Subsystem: PLX Technology, Inc.: Unknown device 9030

        Flags: medium devsel, IRQ 9

        Memory at fe6f0000 (32-bit, non-prefetchable)

        I/O ports at 2000

        Memory at fe6e0000 (32-bit, non-prefetchable)

        Memory at fe6d0000 (32-bit, non-prefetchable)

        Capabilities: [40] Power Management version 1

        Capabilities: [48] #06 [0000]

        Capabilities: [4c] Vital Product Data



#dmesg output shows:

ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 28 (level, low) -> IRQ 217

Detected Tormenta 3 Quad E1 - TOR3 at 0xfe6e0000/0xfe6d0000 irq 217

Xilinx Chip successfully loaded, configured and started!!

Detected Card number: 0

Tor3: Launching card: 0

Registered Tormenta 3-E PCI

Registered tone zone 4 (United Kingdom)

SPAN 1: Primary Sync Source

SPAN 2: Secondary Sync Source

SPAN 3: Tertiary Sync Source

SPAN 4: Quaternary Sync Source

Zapata Telephony Interface Registered on major 196

Zaptel Version: 1.2.17.1

Zaptel Echo Canceller: KB1

Zaptel: Master changed to Tor3/0/2

Zaptel: Master changed to Tor3/0/3

Zaptel: Master changed to Tor3/0/4

Zaptel: Master changed to Tor3/0/1

Zaptel Transcoder support loaded



So, my question is: is it possible to make a chan_ss7 work with
Govarion Tormenta 3 cards at all? Or shell I migrate to the native
asterisk SS7? I'll appreciate any help.



        
___________________________________________________________ 
Inbox full of unwanted email? Get leading protection and 1GB storage with
All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html


------------------------------

Message: 2
Date: Wed, 30 May 2007 18:12:49 -0400
From: "Robert Kenton" <robert.kenton at gmail.com>
Subject: Re: [asterisk-ss7] Tormenta TOR3 card Asterisk chan_ss7
To: asterisk-ss7 at lists.digium.com
Message-ID:
    <9fb0089c0705301512l6a30456ema9ddb6142d35aee0 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hmmm.... It seems a wrong PC configuration.

The link is aligned but after sending the SLTM, it's waitng for the SLTA
which never arrive.

On the remote end, they are sending an UBL message that indicate they has
sent and received a correct SLTM/SLTA.

Verify PC and SLC on both ends (chan_ss7 and Siemens side).

Robert.


On 5/30/07, Andrew Somov <asomov12 at yahoo.co.uk> wrote:
>
> Tormenta TOR3 card Asterisk chan_ss7 problem. SS7 link is flupping, Need
> help!!!
>
> I was trying to interconnect with several providers, the result was the
> same. The link is going up for a several seconds, then
>
> failed with strings bellow. The channel was compiled without errors and
> asterisk has started with no warnings.
>
> Asterisk-1.2.18, chan_ss7 - 0.9 , chan_oh323, CentOS4.4 2.6.9-48.ELsmp,
> the zaptel tor3e driver was pulled from http://www.govarion.com/tor3/,
> the server is dual Intel(R) Xeon(TM) CPU 3.06GHz stepping
> 09(hyperthreading on).
>
>
>
> This issue is quite close to
> http://lists.digium.com/pipermail/asterisk-ss7/2006-July/000410.html
> and
>
>
>
http://www.asteriskguru.com/tutorials/pci_irq_apic_tdm_ticks_te410p_te405p_n
oise.html
>
> I was explored through all and still have the same result.
>
>
>
> Getting this error while trying to connect to the provider (DMS switch).
> the ss7 link status dives:
>
> linkset testlink, link l1, schannel 16, INSERVICE, rx: 5, tx: 3/3,
> sentseq/lastack: 3/3, total  33458560,  33458624
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=1, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=2, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=3, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=4, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=5, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=6, typ=UBL message discarded.
>
> May 30 16:48:13 WARNING[12951]: l4isup.c:2284 process_circuit_message:
> Group reset still in progress for CIC=7, typ=UBL message discarded.
> etc. (cut)
>
> May 30 16:48:15 WARNING[12951]: mtp.c:791 timeout_sltm_t1: No SLTA
> received within Q.707 timer T1, trying again on link 'l1'.
>
> May 30 16:48:24 ERROR[12951]: mtp.c:796 timeout_sltm_t1: No SLTA received
> within Q.707 timer T1, faulting link on link 'l1'.
>
> May 30 16:48:24 WARNING[12951]: chan_ss7.c:636 monitor_main: MTP is now
> DOWN on link 'l1'.
>
> May 30 16:48:24 NOTICE[12951]: mtp.c:502 mtp_changeover: MTP changeover
> last_ack=3, last_sent=3, from schannel 16, no INSERVICE schannel found
>
> May 30 16:48:24 NOTICE[12951]: mtp.c:506 mtp_changeover: Failover not
> possible, no other signalling link and no other host available.
>
> testlink*CLI> ss7 link status
>
> linkset testlink, link l1, schannel 16, DOWN, rx: 2, tx: 4/4,
> sentseq/lastack: 3/4, total  33467808,  33467872
>
> testlink*CLI> ss7 link status
>
> linkset testlink, link l1, schannel 16, NOT_ALIGNED, rx: 0, tx: 1/4,
> sentseq/lastack: 127/127, total  35673520,  35673584
>
> May 30 16:49:40 WARNING[12951]: mtp.c:424 t2_timeout: MTP2 timer T2
> timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial
> alignment failed on link 'l1'.
>
>
>
> My /etc/asterisk/zapata.conf is empty,
>
> cat /etc/zaptel.conf gives
>
> span=1,1,0,ccs,hdb3
>
> bchan=1-31
>
> span=2,2,0,ccs,hdb3
>
> bchan=32-62
>
> span=3,3,0,ccs,hdb3
>
> bchan=63-93
>
> span=4,4,0,ccs,hdb3
>
> bchan=94-124
>
> loadzone = uk
>
> defaultzone = uk
>
>
>
> cat /etc/asterisk/ss7.conf :
>
>
>
> [linkset-testlink]
>
> enabled => yes
>
> enable_st => no
>
> use_connect => no
>
> hunting_policy => even_mru
>
> ;t35 => 15000,timeout
>
> subservice => 8
>
> context => default
>
> language => en
>
>
>
> [link-l1]
>
> linkset => testlink
>
> enabled => yes
>
> channels => 1-15,17-31
>
> schannel => 16
>
> firstcic => 1
>
>
>
> [link-l2]
>
> linkset => testlink
>
> enabled => yes
>
> channels => 1-15,17-31
>
> schannel =>
>
> firstcic => 33
>
>
>
> [link-l3]
>
> enabled => yes
>
> linkset => testlink
>
> channels => 1-15,17-31
>
> schannel =>
>
> firstcic => 65
>
>
>
> [link-l4]
>
> enabled => no
>
> linkset => testlink
>
> channels => 1-15,17-31
>
> schannel =>
>
> firstcic => 97
>
>
>
> [host-host.domain.com]
>
> enabled => yes
>
> default_linkset => testlink
>
> ;autopc => yes
>
> opc => 0x27f2 ;13131
>
> dpc => testlink:0x3b48 ;->provider1  (0x334b ;-> provider2)
>
> if-1 => my.host.ip.addr
>
> links => l1:1,l2:2,l3:3,l4:4
>
>
>
> /sbin/lsmod
>
> Module                  Size  Used by
>
> zttranscode            12552  0
>
> tor3e                  89116  0
>
> zaptel                186532  184 zttranscode,tor3e
>
> crc_ccitt               6209  1 zaptel
>
> md5                     8129  1
>
> ipv6                  243425  30
>
> autofs4                25413  0
>
> sunrpc                143909  1
>
> button                 10705  0
>
> battery                12997  0
>
> ac                      8901  0
>
> hw_random               9685  0
>
> e1000                 119249  0
>
> floppy                 58193  0
>
> ata_piix               19141  0
>
> libata                105757  1 ata_piix
>
> sg                     38369  0
>
> dm_snapshot            21093  0
>
> dm_zero                 6337  0
>
> dm_mirror              31173  0
>
> ext3                  119113  2
>
> jbd                    59609  1 ext3
>
> dm_mod                 64617  8 dm_snapshot,dm_zero,dm_mirror
>
> aic79xx               187613  5
>
> sd_mod                 20545  9
>
> scsi_mod              119757  4 libata,sg,aic79xx,sd_mod
>
>
>
> cat /proc/interrupts gives shows that tor3e IRQ 217 is in the different
> CPU from the eth0 network card:
>
>
>
>            CPU0       CPU1       CPU2       CPU3
>
>   0:    2981832    2911004    2910992    2904442    IO-APIC-edge  timer
>
>   1:          8         69         50          0    IO-APIC-edge  i8042
>
>   8:          1          0          0          0    IO-APIC-edge  rtc
>
>   9:          9          0          0          0   IO-APIC-level  acpi
>
> 185:         30          0          0          0   IO-APIC-level  aic79xx
>
> 193:       4999       1944       3374       8368   IO-APIC-level  aic79xx
>
> 201:      52790          0          0          0   IO-APIC-level  eth0
>
> 217:          0    5284112    5280614      20005   IO-APIC-level  tor3e
>
> NMI:          0          0          0          0
>
> LOC:   11708215   11708091   11708090   11708212
>
> ERR:          0
>
> MIS:          0
>
>
>
> #lspci -vb gives me the output bellow. (On IRQ 9 there are olso RAID bus,
> ethernet, and I mentioned there is no latency)
>
> #lspci -v gives IRQ 217, proved that APIC is running and it is unique.
>
> 03:0a.0 Bridge: PLX Technology, Inc.: Unknown device d44d (rev 01)
>
>         Subsystem: PLX Technology, Inc.: Unknown device 9030
>
>         Flags: medium devsel, IRQ 9
>
>         Memory at fe6f0000 (32-bit, non-prefetchable)
>
>         I/O ports at 2000
>
>         Memory at fe6e0000 (32-bit, non-prefetchable)
>
>         Memory at fe6d0000 (32-bit, non-prefetchable)
>
>         Capabilities: [40] Power Management version 1
>
>         Capabilities: [48] #06 [0000]
>
>         Capabilities: [4c] Vital Product Data
>
>
>
> #dmesg output shows:
>
> ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 28 (level, low) -> IRQ 217
>
> Detected Tormenta 3 Quad E1 - TOR3 at 0xfe6e0000/0xfe6d0000 irq 217
>
> Xilinx Chip successfully loaded, configured and started!!
>
> Detected Card number: 0
>
> Tor3: Launching card: 0
>
> Registered Tormenta 3-E PCI
>
> Registered tone zone 4 (United Kingdom)
>
> SPAN 1: Primary Sync Source
>
> SPAN 2: Secondary Sync Source
>
> SPAN 3: Tertiary Sync Source
>
> SPAN 4: Quaternary Sync Source
>
> Zapata Telephony Interface Registered on major 196
>
> Zaptel Version: 1.2.17.1
>
> Zaptel Echo Canceller: KB1
>
> Zaptel: Master changed to Tor3/0/2
>
> Zaptel: Master changed to Tor3/0/3
>
> Zaptel: Master changed to Tor3/0/4
>
> Zaptel: Master changed to Tor3/0/1
>
> Zaptel Transcoder support loaded
>
>
>
> So, my question is: is it possible to make a chan_ss7 work with
> Govarion Tormenta 3 cards at all? Or shell I migrate to the native
> asterisk SS7? I'll appreciate any help.
>
>
>
>
> ___________________________________________________________
> Inbox full of unwanted email? Get leading protection and 1GB storage with
> All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070530/e4c1573e
/attachment.htm

------------------------------

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-ss7


End of asterisk-ss7 Digest, Vol 27, Issue 15
********************************************



------------------------------

Message: 2
Date: Thu, 31 May 2007 10:48:50 -0300
From: Juan Carlos Castro y Castro <jcastro at instant.com.br>
Subject: [asterisk-ss7] Core dump in chan_ss7 -- here's the backtrace
To: asterisk-ss7 at lists.digium.com
Message-ID: <465ED242.4000400 at instant.com.br>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

What could be causing it? And another question: since chan_ss7 hasn't 
been updated in the last seven months, is there anyone there developing 
patches for it? My ss7.conf (two machines in a cluster) is below.

Program terminated with signal 11, Segmentation fault.
#0  0x00d11201 in isup_event_handler (event=0xb7b7caec) at l4isup.c:4017
4017      ast_log(LOG_DEBUG, "Got ISUP event, typ=%s, cic=%d, pvt.eq=%d 
\n", isupmsg(isup_msg.typ), isup_msg.cic, pvt->equipped);
(gdb) bt
#0  0x00d11201 in isup_event_handler (event=0xb7b7caec) at l4isup.c:4017
#1  0x00d1fa67 in cluster_receive_packet (senderix=0, fd=54) at 
cluster.c:570
#2  0x00d203bd in cluster_thread_main (data=0x0) at cluster.c:712
#3  0x004373db in start_thread () from /lib/libpthread.so.0
#4  0x0039126e in clone () from /lib/libc.so.6


[linkset-rp1]
enabled => yes
enable_st => no
use_connect => yes
hunting_policy => even_mru
subservice => auto
context => ss7
language => da
t35 => 15000,timeout
subservice => auto

[linkset-rp4]
enabled => yes
enable_st => no
use_connect => yes
hunting_policy => even_mru
subservice => auto
context => ss7
language => da
t35 => 15000,timeout
subservice => auto

[link-l1]
linkset => rp1
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes

[link-l2]
linkset => rp4
channels => 1-31
schannel =>
firstcic => 1
enabled => yes

[link-l10]
linkset => rp4
channels => 1-15,17-31
schannel => 16
firstcic => 129
enabled => yes

[host-iv-si-mgt-01]
enabled => yes
default_linkset => rp1
opc => 0x3fce                   ; 16334
dpc => rp1:0x25cb,rp4:0x25cf    ; 9675, 9679
links => l1:1,l2:2
if-1 => 192.168.40.106

[host-iv-si-mgt-03]
enabled => yes
default_linkset => rp4
opc => 0x3fce                   ; 16334
dpc => rp1:0x25cf,rp4:0x25cb    ; 9679, 9675
links => l10:2
if-1 => 192.168.40.108

[cluster]
; Listen on TCP port 5040
port => 5040
l1 => iv-si-mgt-03#if-1
l2 => iv-si-mgt-03#if-1
l10 => iv-si-mgt-01#if-1



------------------------------

Message: 3
Date: Thu, 31 May 2007 10:13:32 -0400
From: "Robert Kenton" <robert.kenton at gmail.com>
Subject: Re: [asterisk-ss7] Core dump in chan_ss7 -- here's the
    backtrace
To: asterisk-ss7 at lists.digium.com
Message-ID:
    <9fb0089c0705310713s2a2b3b24l78540cb29f134dad at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Please, do a 'bt full' to see better the cause.

Rk

On 5/31/07, Juan Carlos Castro y Castro <jcastro at instant.com.br> wrote:
>
> What could be causing it? And another question: since chan_ss7 hasn't
> been updated in the last seven months, is there anyone there developing
> patches for it? My ss7.conf (two machines in a cluster) is below.
>
> Program terminated with signal 11, Segmentation fault.
> #0  0x00d11201 in isup_event_handler (event=0xb7b7caec) at l4isup.c:4017
> 4017      ast_log(LOG_DEBUG, "Got ISUP event, typ=%s, cic=%d, pvt.eq=%d
> \n", isupmsg(isup_msg.typ), isup_msg.cic, pvt->equipped);
> (gdb) bt
> #0  0x00d11201 in isup_event_handler (event=0xb7b7caec) at l4isup.c:4017
> #1  0x00d1fa67 in cluster_receive_packet (senderix=0, fd=54) at
> cluster.c:570
> #2  0x00d203bd in cluster_thread_main (data=0x0) at cluster.c:712
> #3  0x004373db in start_thread () from /lib/libpthread.so.0
> #4  0x0039126e in clone () from /lib/libc.so.6
>
>
> [linkset-rp1]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => even_mru
> subservice => auto
> context => ss7
> language => da
> t35 => 15000,timeout
> subservice => auto
>
> [linkset-rp4]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => even_mru
> subservice => auto
> context => ss7
> language => da
> t35 => 15000,timeout
> subservice => auto
>
> [link-l1]
> linkset => rp1
> channels => 1-15,17-31
> schannel => 16
> firstcic => 1
> enabled => yes
>
> [link-l2]
> linkset => rp4
> channels => 1-31
> schannel =>
> firstcic => 1
> enabled => yes
>
> [link-l10]
> linkset => rp4
> channels => 1-15,17-31
> schannel => 16
> firstcic => 129
> enabled => yes
>
> [host-iv-si-mgt-01]
> enabled => yes
> default_linkset => rp1
> opc => 0x3fce                   ; 16334
> dpc => rp1:0x25cb,rp4:0x25cf    ; 9675, 9679
> links => l1:1,l2:2
> if-1 => 192.168.40.106
>
> [host-iv-si-mgt-03]
> enabled => yes
> default_linkset => rp4
> opc => 0x3fce                   ; 16334
> dpc => rp1:0x25cf,rp4:0x25cb    ; 9679, 9675
> links => l10:2
> if-1 => 192.168.40.108
>
> [cluster]
> ; Listen on TCP port 5040
> port => 5040
> l1 => iv-si-mgt-03#if-1
> l2 => iv-si-mgt-03#if-1
> l10 => iv-si-mgt-01#if-1
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070531/89346f13/attachment.htm

------------------------------

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-ss7


End of asterisk-ss7 Digest, Vol 27, Issue 16
********************************************





		
___________________________________________________________ 
Yahoo! Messenger - with free PC-PC calling and photo sharing. http://uk.messenger.yahoo.com


More information about the asterisk-ss7 mailing list