[asterisk-ss7] how to install Asterisk-ss7 & libss7
Mr.Surender Reddy
gvsurenderreddy at gmail.com
Sat Oct 7 14:54:41 MST 2006
Dear sir,
I have configured as u written to me but iam getting this
messages can u please help me sir .my orgination point code is 124 and
destination point code is 31 and 32 in decimal in HEX 0-15-4 and 0-3-7 ,
0-4-0.If u dont mind can please guide me sir
[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: !! Unable to
handle SIG_NET_MNG message with H1 = 1 and H0 = 4
[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: Received error
from mtp3 layer: -1
[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: !! Unable to
handle SIG_NET_MNG message with H1 = 1 and H0 = 4
[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: Received error
from mtp3 layer: -1
[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: !! Unable to
handle SIG_NET_MNG message with H1 = 1 and H0 = 4
[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: Received error
from mtp3 layer: -1
[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: !! Unable to
handle SIG_NET_MNG message with H1 = 1 and H0 = 4
[Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: Received error
from mtp3 layer: -1
--- SS7 Up ---
[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: -- !!
Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4
Resetting CICs 1 to 15
[Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: -- Received
error from mtp3 layer: -1
Resetting CICs 17 to 62
--- SS7 Up ---
-- Resetting CICs 63 to 77
-- Resetting CICs 79 to 124
regards
surender
On 29/09/06, Matthew Fredrickson <creslin at digium.com> wrote:
>
> There already is a zapata.conf sample config. You included it in your
> reply. The zaptel.conf is setup just like you setup your PRI, with
> your bearers setup as bchans and your signalling channel(s) as dchan.
>
> For an F-link, with one signalling channel zaptel.conf would look
> something like this (for the channel layout)
>
> bchan=1-15
> dchan=16
> bchan=17-31
>
> Your zapata.conf would looks something like this:
> signalling=ss7
> ss7type=itu
> ; which linkset all of these options apply to
> linkset=1
> ; This is your point code
> pointcode=1111
> ; This is the pointcode that your ISUP messages are sent to
> defaultdpc=2222
> ; This is the pointcode of the node adjacent to this link
> adjpointcode=2222
> ; This is the channel number of your signalling channel (your dchan
> option in zaptel.conf
> sigchan=16
> ; Context calls will come into
> context=ss7
> ; This will map Zap/1-15 as CICs 1-15
> cicbeginswith=1
> channel=1-15
> ; This will map Zap/17-31 as CICs 17-31
> cicbeginswith=17
> channel=17-31
>
> To do it with another linkset, just duplicate all of the above, but
> just change linkset=2 and set your options for that linkset.
>
> Matthew Fredrickson
>
>
> On Sep 29, 2006, at 1:49 PM, Mr.Surender Reddy wrote:
>
> > Dear sir,
> > If you dont mind can u please give me a sample conf file
> > like what Chanss7 people give in their list If u can add somthing like
> > that .So that it will be easy for many to try this new development.
> >
> > regards
> > surender
> >
> >
> > On 29/09/06, Matthew Fredrickson <creslin at digium.com> wrote: It looks
> > like you're trying to terminate 2 linksets on one machine.
> >> Just set it up so that you have two linksets in zapata.conf.You
> >> can't
> >> do comma separation for your sigchan and defaultdpc.You have to
> >> declare those one at a time.Also, your zaptel.conf needs to have
> >> your
> >> signalling channel set to be dchan (or hardhdlc if you're using a card
> >> that supports it).
> >>
> >> Matthew Fredrickson
> >>
> >> On Sep 29, 2006, at 3:09 AM, Mr.Surender Reddy wrote:
> >>
> >> > Dear Matthew,
> >> > I Thankx for our Intrest to help me out in
> >> > this.Below are the Details which iam using for Chanss7 .But i want
> >> to
> >> > try Libss7 Please help me out.
> >> >
> >> > ss7.conf of Chanss7
> >> >
> >> >
> >> >
> >> > [linkset-Ts1]
> >> >
> >> > enabled => yes
> >> >
> >> > enable_st => yes
> >> >
> >> > use_connect => yes
> >> >
> >> > hunting_policy => seq_htl
> >> >
> >> > context => ss7
> >> >
> >> > subservice => 8
> >> >
> >> > [linkset-Ts2]
> >> >
> >> > enabled => yes
> >> >
> >> > enable_st => yes
> >> >
> >> > use_connect =>yes
> >> >
> >> > hunting_policy => seq_htl
> >> >
> >> > context => ss7
> >> >
> >> > subservice => 8
> >> >
> >> > [link-l1]
> >> >
> >> > linkset => Ts1
> >> >
> >> > channels => 1-15,17-31
> >> >
> >> > schannel => 16
> >> >
> >> > firstcic => 1
> >> >
> >> > enabled => yes
> >> >
> >> > [link-l2]
> >> >
> >> > linkset => Ts1
> >> >
> >> > channels => 1-31
> >> >
> >> > schannel =>
> >> >
> >> > firstcic => 33
> >> >
> >> > enabled => YES
> >> >
> >> > [link-l3]
> >> >
> >> > linkset => Ts2
> >> >
> >> > channels =>1-15,17-31
> >> >
> >> > schannel => 16
> >> >
> >> > firstcic => 1
> >> >
> >> > enabled => yes
> >> >
> >> > [link-l4]
> >> >
> >> > linkset => Ts2
> >> >
> >> > channels => 1-31
> >> >
> >> > schannel =>
> >> >
> >> > firstcic => 33
> >> >
> >> > enabled => YES
> >> >
> >> > [host-localhost.localdomain]
> >> >
> >> > enabled => yes
> >> >
> >> > default_linkset => Ts2
> >> >
> >> > opc => 124
> >> >
> >> > dpc => Ts1:31,Ts2:32
> >> >
> >> > links => l1:1,l2:2,l3:3,l4:4
> >> > This is the zaptel.conf
> >> >
> >> >
> >> >
> >> > span=1,0,0,ccs,hdb3
> >> >
> >> > bchan = 1-31
> >> >
> >> > span=2,0,0,ccs,hdb3
> >> >
> >> > bchan=32-62
> >> >
> >> > span=3,0,0,ccs,hdb3
> >> >
> >> > bchan=63-93
> >> >
> >> > span=4,1,0,ccs,hdb3
> >> >
> >> > bchan=94-124
> >> >
> >> >
> >> > loadzone = us
> >> >
> >> > defaultzone = us
> >> > I have compiled the Libss7 and tried to use that but iam unable to
> >> use
> >> > that as Zapta.conf i couldnt configure fine i tired this way i dont
> >> > think that is correct Can u please see this Zapta.conf which i
> >> wanted
> >> > to use for libss7
> >> >
> >> >
> >> > Signaling type SS7
> >> > signalling = ss7
> >> >
> >> > ; Variant of SS7 signaling:
> >> > ; Options are itu and ansi
> >> > ss7type = itu
> >> >
> >> > ; All settings apply to linkset 1
> >> > linkset = 1
> >> >
> >> > ; Point code of the linkset
> >> > pointcode = 124
> >> >
> >> > ; Point code of node adjacent to this signaling link (Possibly the
> >> STP
> >> > between you and
> >> > ; your destination)
> >> > adjpointcode = 31,32
> >> >
> >> > ; Default point code that you would like to assign to outgoing
> >> > messages (in case of
> >> > ; routing through STPs, or using A links)
> >> > defaultdpc = 31,32
> >> >
> >> > ; Begin CIC (Circuit indication codes) count with this number
> >> > cicbeginswith = 1
> >> >
> >> > ; What the MTP3 network indicator bits should be set to. Choices
> >> are
> >> > ; national, national_spare, international, international_spare
> >> > networkindicator=national
> >> >
> >> > ; First signaling channel
> >> > sigchan = 16
> >> >
> >> > ; Channels to associate with CICs on this linkset
> >> > channel = 25-47
> >> > regards
> >> > surender
> >> >
> >> >
> >> > On 28/09/06, Matthew Fredrickson < creslin at digium.com> wrote: What
> >> is
> >> > the layout of your spans (which channel is the signalling
> >> >> channel on) and what is your layout of your CICs ( i.e. what
> >> channels
> >> >> map to which CICs).After you find that out post your zaptel.conf
> >> and
> >> >> zapata.conf and we'll see if we can sort it out.
> >> >>
> >> >> Matthew Fredrickson
> >> >>
> >> >> On Sep 28, 2006, at 1:49 AM, Mr.Surender Reddy wrote:
> >> >>
> >> >> > HI Matthew,
> >> >> > Iam using Chanss7 i would like to test Libss7 iam
> >> >> > unable to configure my SS7 channels with this version I have two
> >> ss7
> >> >> > Links i would like to test both on this machine.How can i do this
> >> >> can
> >> >> > u please guide me if u dont mind.
> >> >> >
> >> >> > regards
> >> >> > surender
> >> >> >
> >> >> >
> >> >> > On 27/09/06, Matthew Fredrickson < creslin at digium.com> wrote:
> >> >> >> On Sep 26, 2006, at 9:44 PM, Rob Hillis wrote:
> >> >> >>
> >> >> >> >> Also, you may want to get asterisk trunk as well, since
> >> >> >> >> that I merged in all the libss7 changes from the asterisk-ss7
> >> >> >> branch
> >> >> >> >> into asterisk-trunk. (svn co
> >> >> >> http://svn.digium.com/svn/asterisk/trunk
> >> >> >>>> asterisk-trunk)
> >> >> >> >
> >> >> >> >
> >> >> >> > So does this mean that the asterisk-ss7 branch is no longer
> >> under
> >> >> >> > development and all future changes are going to be made to the
> >> >> >> Asterisk
> >> >> >> > trunk?Should I be looking at moving from the asterisk-ss7
> >> branch
> >> >> >> to
> >> >> >> > the
> >> >>>> > main asterisk trunk?
> >> >> >>
> >> >> >> For the time being, yes, that would probably be a good idea.I
> >> think
> >> >> >> I
> >> >> >> may re-branch the asterisk-ss7 branch whenever the 1.4 release
> >> >> comes
> >> >> >> out though and backport the changes in trunk to the 1.4 based
> >> ss7
> >> >> >> branch.
> >> >>
> >> >> _______________________________________________
> >> >> --Bandwidth and Colocation provided by Easynews.com --
> >> >>
> >> >> asterisk-ss7 mailing list
> >> >> To UNSUBSCRIBE or update options visit:
> >> >> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >> > _______________________________________________
> >> > --Bandwidth and Colocation provided by Easynews.com --
> >> >
> >> > asterisk-ss7 mailing list
> >> > To UNSUBSCRIBE or update options visit:
> >> >http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation provided by Easynews.com --
> >>
> >> asterisk-ss7 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20061007/24d0e5f8/attachment.htm
More information about the asterisk-ss7
mailing list