[asterisk-ss7] Some Feature-Questions.

[asterisk at nicox.org]

So, i think i got this to work, i have to test it with "real links" but i 
think its working.
If anyone needs the configuration, let me know

Nico


On Tue, 28 Nov 2006, Marc Storck wrote:

> In the mean time I tested this overhere, but with only two links (1 link for 
> each linkset), only the first link has an schannel.
>
> Using this config the channels on l2 stay in Idle Reset pending status, 
> trying to block and unblock channels has the following results:
>
> Nov 28 16:56:39 NOTICE[5667]: l4isup.c:3598 do_group_circuit_block_unblock: 
> Sending CIRCUIT GROUP BLOCKING, cic=33, mask=0x00000001.
> Nov 28 16:56:39 WARNING[658]: mtp.c:1669 mtp_thread_main: No signalling links 
> inservice and no cluster receivers alive, dropping packet!
>
> Blocking and unblocking request from far end are ignored as no CICs are 
> assigned to linkset to which schannel from l1 is assigned.
>
> The ss7 driver however does not complain about the  config itself, so either 
> the config error checking isn't checking this, or the driver takes the 
> binding of Schannel ==> linlkset to strictly....
>
> Who can tell???
>
> Thanks,
>
> Marc
>
> Goke Aruna wrote:
>> yes... with chan_ss7.
>> 
>> i have this sample and its working now.
>> 
>> [linkset-xyz]
>> enabled => yes
>> enable_st => no
>> use_connect => no
>> hunting_policy => seq_lth
>> subservice => auto
>> language => en
>> context => xyz-out
>> 
>> [linkset-abc]
>> enabled => yes
>> enable_st => no
>> use_connect => no
>> hunting_policy => seq_lth
>> subservice => auto
>> language => en
>> context => abc-out
>> 
>> [link-l1]
>> linkset => xyz
>> channels => 1-15,17-31
>> schannel => 16
>> firstcic => 1
>> echocancel=allways
>> echocan_taps=32
>> echocan_train=350
>> enabled => yes
>> 
>> [link-l2]
>> linkset => xyz
>> channels => 1-15,17-31
>> schannel =>
>> firstcic => 33
>> echocancel=allways
>> echocan_taps=32
>> ;echocan_train=350
>> enabled => yes
>> 
>> [link-l3]
>> linkset => abc
>> channels => 1-15,17-31
>> schannel =>
>> firstcic => 65
>> echocancel=allways
>> echocan_taps=32
>> ;echocan_train=350
>> enabled => yes
>> 
>> [link-l4]
>> linkset => abc
>> channels => 1-15,17-31
>> schannel =>
>> firstcic => 97
>> echocancel=allways
>> echocan_taps=32
>> ;echocan_train=350
>> enabled => yes
>> 
>> [host-myhost]
>> enabled => yes
>> opc => 609
>> default_linkset => xyz
>> dpc => xyz:223,abc:223
>> links => l1:1,l2:2,l3:3,l4:4
>> 
>> 
>> i have this ss7.conf
>> 
>> and its working for me.
>> 
>> that is question number 1.
>> 
>> i think question number 2 should not be a question since u said u used
>> the two box to test before.
>> 
>> goksie
>> 
>> 
>> asterisk at nicox.org wrote:
>>> Is noone there who can answer my questions?
>>> 
>>> :-(
>>> 
>>> 
>>> On Wed, 22 Nov 2006, asterisk at nicox.org wrote:
>>> 
>>>> Hello,
>>>> 
>>>> I have some feature-questions.
>>>> 
>>>> 1.)
>>>> I have one Asterisk Box with SS7 and 4 E1 Ports.
>>>> i have one Telco with 4 Routings, a a high quality routing, a quality
>>>> Routing a cheap routing and a cheaper routing.
>>>> The telco did not give me 4 SS7 Signalling Links.
>>>> Is it Possible to get this running with chan_ss7 or libss7?
>>>> 
>>>> 
>>>> 
>>>> 2.)
>>>> I have 2 Asterisk boxes and one SS7-Signalling Link, is it possible to
>>>> make the signalling for the second box with the Signalling link on the
>>>> first Box?
>>>> 
>>>> 
>>>> 
>>>> Thanks a lot for your help
>>>> 
>>>> 
>>>> Nico
>>>> 
>>>> _______________________________________________
>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>> 
>>>> asterisk-ss7 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>  http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>> 
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>> 
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>> 
>> 
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>> 
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-ss7
>