[asterisk-ss7] Re: Release cause problem

[Anton]

if calling party answers the call, next dialplan step is not 
executed, unles you set appropriate option in Dial() - so 
it will not pass you HangupCause. 

So could you write more specific what side call what what 
side in what condition returns whhat code and what 
causecode and where you receive

On 22 November 2006 17:24, Peter Demeter wrote:
> You mean Hangup in extensions.conf? I tried.  It is
> executed after chan_ss7 disconnects the call so no
> effect.
>
> Thank you anyway.
>
> Regards,
> Peter
>
> Anton anton.vazir at gmail.com
> Wed Nov 22 04:18:08 MST 2006
>
> Hangup(${DISCONNECTCAUSE}) or made a conditional
> Hangup(CAUSECODE) if returned causecodes are non-standard
>
> On 22 November 2006 15:49, Peter Demeter wrote:
> > Hi,
> >
> > I have a problem with chan_ss7 & Asterisk.
> >
> > If an IP Phone (SIP) calls a PSTN number and the call
> > is terminated by the calling party chan_ss7 won't (?)
> > recieve a release cause from Asterisk.  In my case this
> > means that the release cause will be 41 (Temporary
> > Failure) in the connecting EWSD switch instead of 16
> > (Normal Call Clearing).