[asterisk-ss7] chan_zap.c:6890 mkintf: Signalling requested on channel ....

[Rafael Visser]

Hi every one.
I am very new on asterisk, and i'm trying to make chan_ss7 work.
The problem that i have is that when i try to start asterisk with asterisk
-vvvvvvvvvvvvvvvcg,  apears the following error:

  == Parsing '/etc/asterisk/zapata.conf': Found
May 17 08:22:20 ERROR[8937]: chan_zap.c:6890 mkintf: Signalling requested
on channel 1 is FXO Loopstart but line is in PRI Signalling signalling
May 17 08:22:20 ERROR[8937]: chan_zap.c:10314 setup_zap: Unable to register
channel '1-15'
May 17 08:22:20 WARNING[8937]: loader.c:414 __load_resource: chan_zap.so:
load_module failed, returning -1
May 17 08:22:20 WARNING[8937]: loader.c:554 load_modules: Loading module
chan_zap.so failed!


I have one TE110P and a TDM400P
zttools displays alarm=OK for both
My zapata.conf is
==============
[channels]
context=default
switchtype=national
signalling=fxo_ls

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no


group = 1
context = default
channel => 1-15,17,31
callerid=asreceived

signalling=fxs_ks
context=from-pstn
group=2
channel => 32

signalling=fxs_ks
context=from-pstn
group=2
channel => 33

signalling=fxs_ks
context=from-pstn
group=2
channel => 34

signalling=fxs_ks
context=from-pstn
group=2
channel => 35
==================

My zaptel.conf is
===========================
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

# Span 2: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxsks=32
fxsks=33
fxsks=34
fxsks=35


loadzone    = us
defaultzone = us
===========================


I allready tried with AAH, but it did'nt load the chan_ss7 module either.

Do you have any idea that will help me to solve the problem?.
Thanks in advance to all...
RV
AVISO LEGAL: Esta información es privada y confidencial y está dirigida
únicamente a su destinatario. Si usted no es el destinatario original de
este mensaje y por este medio pudo  acceder a dicha información por favor
elimine el mensaje. La distribución o copia de este mensaje está
estrictamente prohibida. Esta comunicación es sólo para  propósitos de
información y no debe ser considerada como propuesta, aceptación ni como
una declaración de voluntad oficial de NUCLEO S.A.  La transmisión de
e-mails no garantiza que el correo electrónico sea seguro o libre de error.
Por consiguiente, no manifestamos que esta información sea completa o
precisa.  Toda información está sujeta a alterarse sin previo aviso.

This information is private and confidential and intended for the recipient
only. If you are not the intended recipient of this message you are hereby
notified that any review,  dissemination, distribution or copying of this
message is strictly prohibited. This communication is for information
purposes only and shall not be regarded neither as a proposal,  acceptance
nor as a statement of will or official statement from NUCLEO S.A. . Email
transmission cannot be guaranteed to be secure or error-free. Therefore,
we do not represent that this information is complete or accurate and it
should not be relied upon as such. All information is subject to change