[asterisk-ss7] chan_ss7.c:1889 ss7_write: Write buffer full on CIC=1 (wrote only 0 of 160), audio lost.

[Anton]

I'm getting that with any codecs involved into conversation. 
And as longer the data path is - as often. For ex. 
2xSatelliteHops>1000ms i getting more of the losses. But 
after doing as I described below - that is noticably 
decreased.

On 10 May 2006 20:44, Mr.Surender Reddy wrote:
> Hi,
>    I have changed the sip.conf file with allow=g723 and
> other codec except g729 iam not getting this error.
>
> regards
> surender
>
> On 5/10/06, Anton <anton.vazir at gmail.com> wrote:
> > Kai,
> >
> > In fact it does influence, as ticks in the sound. To
> > get more of them - try calling some far-point, which is
> > behind the satellite link. Me for example :), I can
> > give you connect info if you interested to test.
> >
> > On 10 May 2006 11:28, Kai Militzer wrote:
> > > Hello everyone,
> > >
> > > Anton wrote:
> > > > The same with me. I did _particularry_ decreased
> > > > that, by interconnecting 2 asterisk boxes over IAX2
> > > > with jitterbuffer enabled. Maybe implementing JB in
> > > > chan_ss7 will help elliminating that.
> > >
> > > I do get that message too. The strange thing is, that
> > > I have two machines with a nearly same configuration
> > > (only the PCs differ) and one of these two (the newer
> > > with the faster CPU) gives me more of these errors. I
> > > haven't experienced any effects on the call quality
> > > anyhow.
> > >
> > > Regards
> > > Kai
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-ss7