[asterisk-ss7] chan_ss7 - possibility to chose link?

[Marc Storck]

Thanks for the comment, the same has been proposed in thread 
"[asterisk-ss7] Some Feature-Questions" and it does not work, at least 
not for me.

I can provide my config file again if this of any help.

Regards,
Marc

asterisk at nicox.org wrote:
> 
> I think there is no need to configure a second linkset on the carrier 
> side, you can use the Signalling channel of the first link and only use 
> other CIC, that must be possible, in the next 3 weeks i will make a 
> configuration like this. after this time i can give you news about this, 
> but ofcourse thats to long for you.!?
> 
> i think a configuration like this should work:
> 
> [linkset-W05]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => seq_lth
> context => ss7
> language => da
> t35 => 15000,timeout
> subservice => auto
> 
> [linkset-W03]
> enabled => yes
> enable_st => no
> use_connect => yes
> hunting_policy => even_mru
> context => W03
> language => de
> t35 => 15000,timeout
> subservice => auto
> 
> 
> [link-l1]
> linkset => W05
> channels => 2-31
> schannel => 1
> firstcic => 0
> enabled => yes
> echocancel => no
> echocan_train => 350
> echocan_taps => 128
> 
> [link-l2]
> linkset => W03
> channels => 1-31
> schannel =>
> firstcic => 31
> enabled => yes
> 
> [host-srv25]
> enabled => yes
> default_linkset => W05
> opc => 8802
> dpc => W05:8304,W03,8304
> links => l1:1,l2:2
> 
> 
> 
> On Wed, 13 Dec 2006, Marc Storck wrote:
> 
>> See the Thread: [asterisk-ss7] Some Feature-Questions
>>
>> It does not work for everybody, as the carrier on the other side 
>> probably doesn't want or is unable to configure 2 linksets.
>>
>> I can only welcome Anton's idea.
>>
>> Best regards,
>>
>> Marc
>>
>> Vernier Umali wrote:
>>> Maybe you could set different linksets for the 2 links and address
>>> them accordingly when dialling.
>>>
>>> On 12/13/06, Anton <anton.vazir at gmail.com> wrote:
>>>> Hi! Have anyone implemented the possibility to chose a link
>>>> in linkset to be dialed through?
>>>>
>>>> For example in configuration
>>>>
>>>> [linkset1]
>>>>
>>>> [link-l1]
>>>> linkset => linkset1
>>>>
>>>> [link-l2]
>>>> linkset => linkset1
>>>>
>>>> we have 2xE1 configured in the linkset 1 and so choice of
>>>> hunting policy is only in high-to -low or low-to-high or
>>>> so, BUT if I do need to dial EXACTLY through [link-l1] or
>>>> [link-l2] - there is no such a way. If anyone have and can
>>>> share a patch - I'll very appreciate.
>>>>
>>>> in principle making something like
>>>>
>>>> [trunkgroup-trunkgroup1]
>>>> add_channel => link-l1/1-15,17-31
>>>> add_channel => link-l2/1-31
>>>>
>>>> would be great.
>>>>
>>>> Regards,
>>>> Anton.
>>>> _______________________________________________
>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>
>>>> asterisk-ss7 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-ss7 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-ss7
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7