[asterisk-ss7] Some Feature-Questions.

Marc Storck mstorck at voipgate.com
Fri Dec 1 06:11:23 MST 2006


Thanks Peter,

I changed that to 1 line, unfortunately this didn't do it yet. Do you 
have any other advise?

Best regards,

Marc

Peter Demeter wrote:
> Marc,
> 
> Why two lines for links?
> links => l1:1
> links => l2:2
> 
> Please try the format what Goksie suggested:
> links => l1:1,l2:2
> 
> Regards,
> Peter
> 
> On 11/29/06, *Marc Storck* <mstorck at voipgate.com 
> <mailto:mstorck at voipgate.com>> wrote:
> 
>     Hello Peter,
> 
>     here is my ss7.conf
> 
>     [linkset-TG1]
>     enabled => yes
>     enable_st => no
>     use_connect => no
>     hunting_policy => even_mru
>     context => FROM-TG1
>     language => en
>     t35 => 4000,st
>     subservice => auto
> 
>     [linkset-V9FF]
>     enabled => yes
>     enable_st => no
>     use_connect => no
>     hunting_policy => even_mru
>     context => FROM-V9FF
>     language => en
>     t35 => 4000,st
>     subservice => auto
> 
>     [link-l1]
>     linkset => TG1
>     channels => 2-31
>     schannel => 1
>     firstcic => 1
>     enabled => yes
> 
>     [link-l2]
>     linkset => LUXV9FF
>     channels => 1-31
>     schannel =>
>     firstcic => 33
>     enabled => yes
> 
>     [host-004-15-7]
>     enabled => yes
>     opc => 0x27f
>     default_linkset => TG1
>     dpc => TG1:0x108,V9FF:0x108
>     links => l1:1
>     links => l2:2
> 
>     Best regards,
> 
>     Marc
> 
>     Peter Demeter wrote:
>      > Hi,
>      >
>      > It seems that the remote switch thinks that you have CIC 33
>     whitin the
>      > linkset, but your side configured differently.  May I see your
>      > ss7.config file?
>      >
>      > Regards,
>      > Peter
>      >
>      > On 11/28/06, *Marc Storck* <mstorck at voipgate.com
>     <mailto:mstorck at voipgate.com>
>      > <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>> wrote:
>      >
>      >     When the remote switch (an ericsson switch, so this is a
>     "real" link)
>      >     sends messages to me for the CIC 33 and above, I see these
>     messages:
>      >
>      >     Nov 28 17:32:48 WARNING[658]: l4isup.c:4071 l4isup_event:
>     Received
>      >     CIC=33 for unequipped circuit (typ=GRS), link 'l1'.
>      >
>      >     DO you have an advise for  me?
>      >
>      >     Best regards,
>      >
>      >     Marc
>      >
>      >     Goke Aruna wrote:
>      >      > I tested that config on chan_ss7 and its working fine. I dont
>      >     know of libss7
>      >      >
>      >      > goksie
>      >      >
>      >      > On 11/28/06, *Marc Storck* < mstorck at voipgate.com
>     <mailto:mstorck at voipgate.com>
>      >     <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>
>      >      > <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>
>     <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>>> wrote:
>      >      >
>      >      >     In the mean time I tested this overhere, but with only two
>      >     links (1
>      >      >     link
>      >      >     for each linkset), only the first link has an schannel.
>      >      >
>      >      >     Using this config the channels on l2 stay in Idle Reset
>      >     pending status,
>      >      >     trying to block and unblock channels has the following
>     results:
>      >      >
>      >      >     Nov 28 16:56:39 NOTICE[5667]: l4isup.c:3598
>      >      >     do_group_circuit_block_unblock: Sending CIRCUIT GROUP
>      >     BLOCKING, cic=33,
>      >      >     mask=0x00000001.
>      >      >     Nov 28 16:56:39 WARNING[658]: mtp.c:1669
>     mtp_thread_main: No
>      >     signalling
>      >      >     links inservice and no cluster receivers alive,
>     dropping packet!
>      >      >
>      >      >     Blocking and unblocking request from far end are
>     ignored as
>      >     no CICs are
>      >      >     assigned to linkset to which schannel from l1 is assigned.
>      >      >
>      >      >     The ss7 driver however does not complain about the  config
>      >     itself, so
>      >      >     either the config error checking isn't checking this,
>     or the
>      >     driver
>      >      >     takes the binding of Schannel ==> linlkset to
>     strictly....
>      >      >
>      >      >     Who can tell???
>      >      >
>      >      >     Thanks,
>      >      >
>      >      >     Marc
>      >      >
>      >      >     Goke Aruna wrote:
>      >      >      > yes... with chan_ss7.
>      >      >      >
>      >      >      > i have this sample and its working now.
>      >      >      >
>      >      >      > [linkset-xyz]
>      >      >      > enabled => yes
>      >      >      > enable_st => no
>      >      >      > use_connect => no
>      >      >      > hunting_policy => seq_lth
>      >      >      > subservice => auto
>      >      >      > language => en
>      >      >      > context => xyz-out
>      >      >      >
>      >      >      > [linkset-abc]
>      >      >      > enabled => yes
>      >      >      > enable_st => no
>      >      >      > use_connect => no
>      >      >      > hunting_policy => seq_lth
>      >      >      > subservice => auto
>      >      >      > language => en
>      >      >      > context => abc-out
>      >      >      >
>      >      >      > [link-l1]
>      >      >      > linkset => xyz
>      >      >      > channels => 1-15,17-31
>      >      >      > schannel => 16
>      >      >      > firstcic => 1
>      >      >      > echocancel=allways
>      >      >      > echocan_taps=32
>      >      >      > echocan_train=350
>      >      >      > enabled => yes
>      >      >      >
>      >      >      > [link-l2]
>      >      >      > linkset => xyz
>      >      >      > channels => 1-15,17-31
>      >      >      > schannel =>
>      >      >      > firstcic => 33
>      >      >      > echocancel=allways
>      >      >      > echocan_taps=32
>      >      >      > ;echocan_train=350
>      >      >      > enabled => yes
>      >      >      >
>      >      >      > [link-l3]
>      >      >      > linkset => abc
>      >      >      > channels => 1-15,17-31
>      >      >      > schannel =>
>      >      >      > firstcic => 65
>      >      >      > echocancel=allways
>      >      >      > echocan_taps=32
>      >      >      > ;echocan_train=350
>      >      >      > enabled => yes
>      >      >      >
>      >      >      > [link-l4]
>      >      >      > linkset => abc
>      >      >      > channels => 1-15,17-31
>      >      >      > schannel =>
>      >      >      > firstcic => 97
>      >      >      > echocancel=allways
>      >      >      > echocan_taps=32
>      >      >      > ;echocan_train=350
>      >      >      > enabled => yes
>      >      >      >
>      >      >      > [host-myhost]
>      >      >      > enabled => yes
>      >      >      > opc => 609
>      >      >      > default_linkset => xyz
>      >      >      > dpc => xyz:223,abc:223
>      >      >      > links => l1:1,l2:2,l3:3,l4:4
>      >      >      >
>      >      >      >
>      >      >      > i have this ss7.conf
>      >      >      >
>      >      >      > and its working for me.
>      >      >      >
>      >      >      > that is question number 1.
>      >      >      >
>      >      >      > i think question number 2 should not be a question
>     since u
>      >     said u
>      >      >     used
>      >      >      > the two box to test before.
>      >      >      >
>      >      >      > goksie
>      >      >      >
>      >      >      >
>      >      >      > asterisk at nicox.org <mailto:asterisk at nicox.org>
>     <mailto: asterisk at nicox.org <mailto:asterisk at nicox.org>> <mailto:
>      >     asterisk at nicox.org <mailto:asterisk at nicox.org>
>     <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>>> wrote:
>      >      >      >> Is noone there who can answer my questions?
>      >      >      >>
>      >      >      >> :-(
>      >      >      >>
>      >      >      >>
>      >      >      >> On Wed, 22 Nov 2006, asterisk at nicox.org
>     <mailto:asterisk at nicox.org>
>      >     <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>>
>      >      >     <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>
>     <mailto: asterisk at nicox.org <mailto:asterisk at nicox.org>>> wrote:
>      >      >      >>
>      >      >      >>> Hello,
>      >      >      >>>
>      >      >      >>> I have some feature-questions.
>      >      >      >>>
>      >      >      >>> 1.)
>      >      >      >>> I have one Asterisk Box with SS7 and 4 E1 Ports.
>      >      >      >>> i have one Telco with 4 Routings, a a high quality
>      >     routing, a
>      >      >     quality
>      >      >      >>> Routing a cheap routing and a cheaper routing.
>      >      >      >>> The telco did not give me 4 SS7 Signalling Links.
>      >      >      >>> Is it Possible to get this running with chan_ss7
>     or libss7?
>      >      >      >>>
>      >      >      >>>
>      >      >      >>>
>      >      >      >>> 2.)
>      >      >      >>> I have 2 Asterisk boxes and one SS7-Signalling
>     Link, is it
>      >      >     possible to
>      >      >      >>> make the signalling for the second box with the
>      >     Signalling link
>      >      >     on the
>      >      >      >>> first Box?
>      >      >      >>>
>      >      >      >>>
>      >      >      >>>
>      >      >      >>> Thanks a lot for your help
>      >      >      >>>
>      >      >      >>>
>      >      >      >>> Nico
>      >      >      >>>
>      >      >      >>> _______________________________________________
>      >      >      >>> --Bandwidth and Colocation provided by
>     Easynews.com <http://Easynews.com>
>      >     <http://Easynews.com>
>      >      >     <http://Easynews.com> --
>      >      >      >>>
>      >      >      >>> asterisk-ss7 mailing list
>      >      >      >>> To UNSUBSCRIBE or update options visit:
>      >      >      >>>  
>     http://lists.digium.com/mailman/listinfo/asterisk-ss7
>      >      >     < http://lists.digium.com/mailman/listinfo/asterisk-ss7>
>      >      >      >>>
>      >      >      >> _______________________________________________
>      >      >      >> --Bandwidth and Colocation provided by
>     Easynews.com <http://Easynews.com>
>      >     < http://Easynews.com>
>      >      >     <http://Easynews.com> --
>      >      >      >>
>      >      >      >> asterisk-ss7 mailing list
>      >      >      >> To UNSUBSCRIBE or update options visit:
>      >      >      >>  
>     http://lists.digium.com/mailman/listinfo/asterisk-ss7
>      >      >      >>
>      >      >      >
>      >      >      > _______________________________________________
>      >      >      > --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com>
>      >     <http://Easynews.com>
>      >      >     < http://Easynews.com> --
>      >      >      >
>      >      >      > asterisk-ss7 mailing list
>      >      >      > To UNSUBSCRIBE or update options visit:
>      >      >      >    
>     http://lists.digium.com/mailman/listinfo/asterisk-ss7
>      >      >     _______________________________________________
>      >      >     --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com>
>      >     <http://Easynews.com>
>      >      >     < http://Easynews.com> --
>      >      >
>      >      >     asterisk-ss7 mailing list
>      >      >     To UNSUBSCRIBE or update options visit:
>      >      >         http://lists.digium.com/mailman/listinfo/asterisk-ss7
>      >      >
>      >      >
>      >      >
>      >      >
>      >    
>     ------------------------------------------------------------------------
>      >      >
>      >      > _______________________________________________
>      >      > --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com>
>      >     <http://Easynews.com> --
>      >      >
>      >      > asterisk-ss7 mailing list
>      >      > To UNSUBSCRIBE or update options visit:
>      >      >     http://lists.digium.com/mailman/listinfo/asterisk-ss7
>      >     _______________________________________________
>      >     --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com>
>      >     <http://Easynews.com> --
>      >
>      >     asterisk-ss7 mailing list
>      >     To UNSUBSCRIBE or update options visit:
>      >        http://lists.digium.com/mailman/listinfo/asterisk-ss7
>      >
>      >
>      >
>      >
>     ------------------------------------------------------------------------
> 
>      >
>      > _______________________________________________
>      > --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com> --
>      >
>      > asterisk-ss7 mailing list
>      > To UNSUBSCRIBE or update options visit:
>      >    http://lists.digium.com/mailman/listinfo/asterisk-ss7
>     _______________________________________________
>     --Bandwidth and Colocation provided by Easynews.com
>     <http://Easynews.com> --
> 
>     asterisk-ss7 mailing list
>     To UNSUBSCRIBE or update options visit:
>        http://lists.digium.com/mailman/listinfo/asterisk-ss7
>     <http://lists.digium.com/mailman/listinfo/asterisk-ss7>
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-ss7


More information about the asterisk-ss7 mailing list