[asterisk-ss7] Some Feature-Questions.
Peter Demeter
pdemeter at gmail.com
Fri Dec 1 01:28:11 MST 2006
Marc,
Why two lines for links?
links => l1:1
links => l2:2
Please try the format what Goksie suggested:
links => l1:1,l2:2
Regards,
Peter
On 11/29/06, Marc Storck <mstorck at voipgate.com> wrote:
>
> Hello Peter,
>
> here is my ss7.conf
>
> [linkset-TG1]
> enabled => yes
> enable_st => no
> use_connect => no
> hunting_policy => even_mru
> context => FROM-TG1
> language => en
> t35 => 4000,st
> subservice => auto
>
> [linkset-V9FF]
> enabled => yes
> enable_st => no
> use_connect => no
> hunting_policy => even_mru
> context => FROM-V9FF
> language => en
> t35 => 4000,st
> subservice => auto
>
> [link-l1]
> linkset => TG1
> channels => 2-31
> schannel => 1
> firstcic => 1
> enabled => yes
>
> [link-l2]
> linkset => LUXV9FF
> channels => 1-31
> schannel =>
> firstcic => 33
> enabled => yes
>
> [host-004-15-7]
> enabled => yes
> opc => 0x27f
> default_linkset => TG1
> dpc => TG1:0x108,V9FF:0x108
> links => l1:1
> links => l2:2
>
> Best regards,
>
> Marc
>
> Peter Demeter wrote:
> > Hi,
> >
> > It seems that the remote switch thinks that you have CIC 33 whitin the
> > linkset, but your side configured differently. May I see your
> > ss7.config file?
> >
> > Regards,
> > Peter
> >
> > On 11/28/06, *Marc Storck* <mstorck at voipgate.com
> > <mailto:mstorck at voipgate.com>> wrote:
> >
> > When the remote switch (an ericsson switch, so this is a "real"
> link)
> > sends messages to me for the CIC 33 and above, I see these messages:
> >
> > Nov 28 17:32:48 WARNING[658]: l4isup.c:4071 l4isup_event: Received
> > CIC=33 for unequipped circuit (typ=GRS), link 'l1'.
> >
> > DO you have an advise for me?
> >
> > Best regards,
> >
> > Marc
> >
> > Goke Aruna wrote:
> > > I tested that config on chan_ss7 and its working fine. I dont
> > know of libss7
> > >
> > > goksie
> > >
> > > On 11/28/06, *Marc Storck* < mstorck at voipgate.com
> > <mailto:mstorck at voipgate.com>
> > > <mailto:mstorck at voipgate.com <mailto:mstorck at voipgate.com>>>
> wrote:
> > >
> > > In the mean time I tested this overhere, but with only two
> > links (1
> > > link
> > > for each linkset), only the first link has an schannel.
> > >
> > > Using this config the channels on l2 stay in Idle Reset
> > pending status,
> > > trying to block and unblock channels has the following
> results:
> > >
> > > Nov 28 16:56:39 NOTICE[5667]: l4isup.c:3598
> > > do_group_circuit_block_unblock: Sending CIRCUIT GROUP
> > BLOCKING, cic=33,
> > > mask=0x00000001.
> > > Nov 28 16:56:39 WARNING[658]: mtp.c:1669 mtp_thread_main: No
> > signalling
> > > links inservice and no cluster receivers alive, dropping
> packet!
> > >
> > > Blocking and unblocking request from far end are ignored as
> > no CICs are
> > > assigned to linkset to which schannel from l1 is assigned.
> > >
> > > The ss7 driver however does not complain about the config
> > itself, so
> > > either the config error checking isn't checking this, or the
> > driver
> > > takes the binding of Schannel ==> linlkset to strictly....
> > >
> > > Who can tell???
> > >
> > > Thanks,
> > >
> > > Marc
> > >
> > > Goke Aruna wrote:
> > > > yes... with chan_ss7.
> > > >
> > > > i have this sample and its working now.
> > > >
> > > > [linkset-xyz]
> > > > enabled => yes
> > > > enable_st => no
> > > > use_connect => no
> > > > hunting_policy => seq_lth
> > > > subservice => auto
> > > > language => en
> > > > context => xyz-out
> > > >
> > > > [linkset-abc]
> > > > enabled => yes
> > > > enable_st => no
> > > > use_connect => no
> > > > hunting_policy => seq_lth
> > > > subservice => auto
> > > > language => en
> > > > context => abc-out
> > > >
> > > > [link-l1]
> > > > linkset => xyz
> > > > channels => 1-15,17-31
> > > > schannel => 16
> > > > firstcic => 1
> > > > echocancel=allways
> > > > echocan_taps=32
> > > > echocan_train=350
> > > > enabled => yes
> > > >
> > > > [link-l2]
> > > > linkset => xyz
> > > > channels => 1-15,17-31
> > > > schannel =>
> > > > firstcic => 33
> > > > echocancel=allways
> > > > echocan_taps=32
> > > > ;echocan_train=350
> > > > enabled => yes
> > > >
> > > > [link-l3]
> > > > linkset => abc
> > > > channels => 1-15,17-31
> > > > schannel =>
> > > > firstcic => 65
> > > > echocancel=allways
> > > > echocan_taps=32
> > > > ;echocan_train=350
> > > > enabled => yes
> > > >
> > > > [link-l4]
> > > > linkset => abc
> > > > channels => 1-15,17-31
> > > > schannel =>
> > > > firstcic => 97
> > > > echocancel=allways
> > > > echocan_taps=32
> > > > ;echocan_train=350
> > > > enabled => yes
> > > >
> > > > [host-myhost]
> > > > enabled => yes
> > > > opc => 609
> > > > default_linkset => xyz
> > > > dpc => xyz:223,abc:223
> > > > links => l1:1,l2:2,l3:3,l4:4
> > > >
> > > >
> > > > i have this ss7.conf
> > > >
> > > > and its working for me.
> > > >
> > > > that is question number 1.
> > > >
> > > > i think question number 2 should not be a question since u
> > said u
> > > used
> > > > the two box to test before.
> > > >
> > > > goksie
> > > >
> > > >
> > > > asterisk at nicox.org <mailto:asterisk at nicox.org> <mailto:
> > asterisk at nicox.org <mailto:asterisk at nicox.org>> wrote:
> > > >> Is noone there who can answer my questions?
> > > >>
> > > >> :-(
> > > >>
> > > >>
> > > >> On Wed, 22 Nov 2006, asterisk at nicox.org
> > <mailto:asterisk at nicox.org>
> > > <mailto:asterisk at nicox.org <mailto:asterisk at nicox.org>>
> wrote:
> > > >>
> > > >>> Hello,
> > > >>>
> > > >>> I have some feature-questions.
> > > >>>
> > > >>> 1.)
> > > >>> I have one Asterisk Box with SS7 and 4 E1 Ports.
> > > >>> i have one Telco with 4 Routings, a a high quality
> > routing, a
> > > quality
> > > >>> Routing a cheap routing and a cheaper routing.
> > > >>> The telco did not give me 4 SS7 Signalling Links.
> > > >>> Is it Possible to get this running with chan_ss7 or
> libss7?
> > > >>>
> > > >>>
> > > >>>
> > > >>> 2.)
> > > >>> I have 2 Asterisk boxes and one SS7-Signalling Link, is
> it
> > > possible to
> > > >>> make the signalling for the second box with the
> > Signalling link
> > > on the
> > > >>> first Box?
> > > >>>
> > > >>>
> > > >>>
> > > >>> Thanks a lot for your help
> > > >>>
> > > >>>
> > > >>> Nico
> > > >>>
> > > >>> _______________________________________________
> > > >>> --Bandwidth and Colocation provided by Easynews.com
> > <http://Easynews.com>
> > > <http://Easynews.com> --
> > > >>>
> > > >>> asterisk-ss7 mailing list
> > > >>> To UNSUBSCRIBE or update options visit:
> > > >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > > < http://lists.digium.com/mailman/listinfo/asterisk-ss7>
> > > >>>
> > > >> _______________________________________________
> > > >> --Bandwidth and Colocation provided by Easynews.com
> > <http://Easynews.com>
> > > <http://Easynews.com> --
> > > >>
> > > >> asterisk-ss7 mailing list
> > > >> To UNSUBSCRIBE or update options visit:
> > > >> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > > >>
> > > >
> > > > _______________________________________________
> > > > --Bandwidth and Colocation provided by Easynews.com
> > <http://Easynews.com>
> > > < http://Easynews.com> --
> > > >
> > > > asterisk-ss7 mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com
> > <http://Easynews.com>
> > > < http://Easynews.com> --
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > >
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com
> > <http://Easynews.com> --
> > >
> > > asterisk-ss7 mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
> > <http://Easynews.com> --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20061201/4db40204/attachment-0001.htm
More information about the asterisk-ss7
mailing list