[asterisk-ss7] asterisk oh323 - chan-ss7 echo problem

[Luciano Ramos]

I've checked the source code of chan_ss7.c and it doesn't have any calls to
turn the echo canceller on, is any workaround available in the meantime the
next release of chan_ss7 is released?

 

Greets, 

 

Luciano

 

  _____  

From: asterisk-ss7-bounces at lists.digium.com
[mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Tom Chandler
Sent: Viernes, 28 de Abril de 2006 03:42 p.m.
To: asterisk-ss7 at lists.digium.com
Subject: Re: [asterisk-ss7] asterisk oh323 - chan-ss7 echo problem

 

If you are using SS7 and E1, then one channel is taken for signaling,
leaving 30 channels for voice.  SS7 will not send more calls than available
channels.  You should be getting a message on the console stating no CIC was
available........

 

Tom Chandler

 

----- Original Message ----- 

From: Goke Aruna <mailto:goksie at gmail.com>  

To: asterisk-ss7 at lists.digium.com 

Sent: Friday, April 28, 2006 1:14 PM

Subject: Re: [asterisk-ss7] asterisk oh323 - chan-ss7 echo problem

 

Can someone suggest any other h323 protocol that could
use with asterisk instead of oh323?

I had similar problem with oh323 and each time it happens the asterisk will
stop at a call going above 30 simultaneus calls 

However, I read from voip-info and which give oh323 some ratings to oh323.

I used A104D sangoma card with chan_ss7 and no echo.

goksie

On 4/28/06, Anton <anton.vazir at gmail.com> wrote: 

Dear Jacob,

Any chance to give us any timing approximation for a next
version?

Regards,
Anton.

On 28 April 2006 17:26, Jacob Tinning wrote:
> On Tue, 18 Apr 2006, leonimar cape wrote:
> > Can someone give a suggestion on what I should do to 
> > omit the echo. Here is may scenario
> >
> >      ---  h323   ---   chan-ss7    ---
> >  A---|  |--------|  |--------------|  |----B
> >      ---         ---               --- 
> >     Nextone    Asterisk         DMS
>
> The next version of chan_ss7 will include
> enabling/disabling of the zaptel echo-canceller, which
> probably will solve your problem.
>
> > The calling party can hear every words he/she say
> > after 1  to 2 seconds. But the called party can hear A
> > with no echo and the quality is clear. I have already
> > tried it in both digium (TE410P) and  sangoma card 
> > (AT104) and the results where the same. Is there any
> > way that I can cancel the echo? Any particular
> > settings that I have to change in the settings of the
> > asterisk?
> 
> The current version of chan_ss7 does not do anything to
> avoid echo. It just passes the audio through the
> channels.
>
> The problem is when A calls an old analog phone B. Old
> analog phones typically bleed some of the audio back to 
> the sender.
>
> Ordinary synchronous telephone-networks doesn't delay the
> audio very much ( < 10ms) so the caller will not notice
> any echo.
>
> Unfortunately, ip-networks induce more delay ( > 70 ms ) 
> which will clearly sound as echo.
>
> To avoid the echo, the only (as far as I know) solution
> is to insert some kind of echo-canceller "in" or "to the
> right" of Asterisk in your drawing. 
>
> As noted above, the next version of chan_ss7 will start
> the zaptel echo-cancellation when a new call is made
> (this is configurable, if you don't want
> echo-cancellation), and stop it again when the call is 
> finished.
>
> Mvh. Jacob
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-ss7 mailing list 
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-ss7

 


  _____  


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-ss7

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20060428/6b7df32d/attachment-0001.htm