[asterisk-r2] preguntita sobre logs de opem MFC/R2

[Andres Gregori]

Ricardo, let me explain.

> -----Mensaje original-----
> De: asterisk-r2-bounces at lists.digium.com [mailto:asterisk-r2-
> bounces at lists.digium.com] En nombre de Mc GRATH Ricardo
> Enviado el: viernes, 06 de abril de 2012 04:45 p.m.
> Para: asterisk-r2 at lists.digium.com
> Asunto: Re: [asterisk-r2] preguntita sobre logs de opem MFC/R2
> 
> Francisco thanks for you comments.
>
> By the way you mean Seimens SDE are only approved, sorry I can't understand
> as well your first paragraph.
>


Siemens SDE are something like the only one approved by "telefonica de argentina
s.a."
on the 90's decade, for cooperative use in small towns



> I understand  when Andres have post his comments it was regardless
> to Elastix connected as private exchange to PSTN carrier by  Siemens.
>

this small cooperative owns the SDE and want to connect this Asterisk
through Sangoma E1 in order to get connect wireless IP customers


> By the other way if Elastix extension call can be routed throgh any other
> resource device, I just mean Elastix can be interconnected to PSTN
> by Analogue FXO port, E1 (MFCR2, ISDN) or SIP, just in case of Telular it
> starting support only FXO port, a few year ago it starting new model with
> SIP gateway.

This is not posible, because if we connect through other device or route,
when wireless ip customer try to call this sort of destination, will "masquered"
his CID.

thank you !
andres


> Best regards
> 
> Mc GRATH Ricardo
> E-Mail mcgrathr at mail2web.com
> 
> ________________________________________
> From: asterisk-r2-bounces at lists.digium.com [asterisk-r2-
> bounces at lists.digium.com] On Behalf Of francisco flores
> [turuwhiska at hotmail.com]
> Sent: 06 April 2012 13:44
> To: asterisk-r2 at lists.digium.com
> Subject: Re: [asterisk-r2] preguntita sobre logs de opem MFC/R2 no MC en
> argentina estas centrales son de uso obligatorio para las cooperativas las
> prestadoras (seguramente telefonica si es en el sur) obligan a las
> cooperativas a distribuir la trama a traves de estas centrales porque ellos
> tarifan de ahi no se puede usar gateway ni asterisk directo ninguno de
> ellos esta homologado. los gateway homologados ponele cisco funcionan
> diferente estas centrales fueron programadas para usar cisco y no se si
> otros gateway (no los probe salen 5 mil dls) pero tienen incompatibilidad
> con las sde argentinas. ponele probe digium no andan (recibe y entrega un
> canal atrasado), sangoma andan con algunos fallos solucionables, como este
> que es cuestion de tocar el codigo de r2, andan unas brasileras tambien
> dando vuelta que parece que son la posta para estas centrales, no tuve
> tiempo de ponerme a ver bien el fallo pero creo que es solucionable a ver
> que respuesta da moy (si te acordas moy ya intentamos alguna vez con placa
> digium en una de estas centrales y no anduvo) nos vemosss
> > From: mcgrathr at mail2web.com
> > To: asterisk-r2 at lists.digium.com
> > Date: Thu, 5 Apr 2012 22:31:52 -0400
> > Subject: Re: [asterisk-r2] preguntita sobre logs de opem MFC/R2
> >
> > Hi Andres
> > Unfortunately no, it complex and hard to explain, Siemens when it send
> Force release it stop any process regardless to dial number cellular
> number, I could recommend you to use Telular, by the way it where analogue
> and SIP gateway for Asterisk, mainly these kind of solution it have been
> used many years ago by PBX reseller for reduce cellular call cost.
> > I found Portech MV-370 is a VoIP GSM/CDMA/UMTS Gateway Best regards
> >
> > Mc GRATH Ricardo
> > E-Mail mcgrathr at mail2web.com