[asterisk-r2] MFC R2 Variant Venezuela using openR2

Moises Silva moises.silva at gmail.com
Wed Mar 31 09:53:21 CDT 2010


People, please understand. E1 alarms have *NOTHING* to do with high level
telephony signaling, if you have alarms in your E1 fix the E1 configuration
not the telephony signaling configuration. The only files for E1
configuration in digium boards are either zaptel.conf or system.conf,
period.

Once alarms are clear ( Green status in dahdi_tool old deprecated name
zttool ) then you can go ahead and play with telephony signaling parameters
in Asterisk, but NOT BEFORE.

And please stop using Zaptel, is old stuff I don't understand why people
keeps using that. Use DAHDI.

On Wed, Mar 31, 2010 at 10:24 AM, Madini Ladino <madinix at gmail.com> wrote:

> Currently is set MFC R2 inbound and DTMF outbound. Do you think maybe
> there's the problem?
>
>    Thanks,
>
> >Date: Tue, 30 Mar 2010 22:18:41 -0430
> >From: Luis Morales <fastonion at gmail.com>
>
> >Subject: Re: [asterisk-r2] MFC R2 Variant Venezuela using openR2
> >To: asterisk-r2 at lists.digium.com
> >Message-ID:
>        <o2ic040749e1003301948r6079045cl6af72fb680d2e06b at mail.gmail.com>
>
> >Content-Type: text/plain; charset=ISO-8859-1
>
> >Hi,
>
> Are you sure if your E1 support mfcr2 signalling ?  CANTV use DTMF
> signalling as default.
>
> Regards,
>
>
>
>
> On Tue, Mar 30, 2010 at 9:57 PM, Juan Carlos Huerta
> <juancarloshuerta at gmail.com> wrote:
> > It seems that the other end (CANTV) has blocked your E1 link, maybe
> > you can ask to your carrier to check the link status in their end.
> >
> > Juan Carlos
> > ~ Lo que no te mata te fortalece ~
> >
> >
> >
> > On Tue, Mar 30, 2010 at 6:37 PM, Madini Ladino <madinix at gmail.com>
> wrote:
> >> I have problems with E1s R2 MFC (CANTV) in Venezuela. Using zttool I got
> Red
> >> Alarm.
> >>
> >> I'm using following versions:
> >>
> >> Asterisk 1.4.26.1
> >> *CLI> mfcr2 show version
> >> OpenR2 version: 1.2.0, revision: (release)
> >>
> >> My digium card is:
> >> pci:0000:0b:08.0???? wct4xxp+???? d161:0220 Wildcard TE220 (4th Gen)
> >>
> >> My? /etc/zaptel.conf? config is:
> >>
> >> span=1,1,0,ccs,hdb3,crc4
> >> bchan=1-15
> >> dchan=16
> >> bchan=17-31
> >> loadzone =es
> >> defaultzone=es
> >>
> >> span=2,1,0,cas,hdb3,crc4
> >> cas=32-46:1101
> >> dchan=47
> >> cas=48-62:1101
> >> loadzone =es
> >> defaultzone=es
> >>
> >> (span 1: I have a ISDN E1 (currently working), span 2: I have MFC R2? E1
> >> from CANTV)
> >>
> >>
> >> My /etc/zapata.conf
> >>
> >> group=4
> >> signalling=mfcr2
> >> mfcr2_variant=ve
> >> mfcr2_get_ani_first=no
> >> mfcr2_max_ani=10
> >> mfcr2_max_dnis=4
> >> mfcr2_category=national_
> subscriber
> >> mfcr2_mfback_timeout=-1
> >> mfcr2_metering_pulse_timeout=-1
> >> mfcr2_logdir=log
> >> mfcr2_logging=all
> >> channel => 32-46
> >> channel => 48-62
> >>
> >>
> >> Actually this R2 E1 is connected to a Nortel and works. When I connect
> to
> >> digium card I only got Red alarm.? I'm using a balun to convert to RJ45.
> >>
> >> When I do zap restart I got:
> >>
> >> ? == Starting D-Channel on span 1
> >> ? == Starting R2 context on span 1
> >> ? == Starting R2 context on span 2
> >> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 32
> >> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 48
> >> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 33
> >> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 49
> >> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 50
> >> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 34
> >> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 51
> >> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 35
> >> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 52
> >> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 36
> >> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 53
> >> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539
> dahdi_r2_on_line_blocked:
> >> Far end blocked on chan 37
> >>
> >>
> >> When I run mfcr2 show channels I have:
> >>
> >> *CLI> mfcr2 show channels
> >> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS?? Rx CAS
> >> ? 32 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 33 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 34 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 35 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 36 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 37 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 38 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 39 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 40 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 41 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 42 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 43 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 44 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 45 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 46 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 48 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 49 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 50 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 51 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 52 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 53 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 54 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 55 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 56 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 57 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 58 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 59 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 60 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 61 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >> ? 62 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK
> >>
> >>
> >> This is my zttool for my span 2:
> >>
> >> ?????????????????? T2XXP (PCI) Card 0 Span 2 ??????????????????
> >> ?? ?????????????????????????????????????????????????????????????????? ?
> >> ??????
> >> ?? ????? ???????????????????????????????????????????????????????????? ?
> >> ?
> >> ?? ????? ???? Current Alarms:???? Red Alarm?????????????????????????? ?
> >> ?
> >> ?? ????? ???? Sync Source:??????? Internally clocked????????????????? ??
> ?
> >> ?
> >> ?? ????? ???? IRQ Misses:?????????????? 0???????????????????????????? ??
> ??
> >> ?
> >> ?? ????? ???? Bipolar Viol:???????????? 0???????????????????????????? ??
> ?
> >> ?
> >> ?? ????? ???? Tx/Rx Levels:???????? 0/? 0???????????????????????????? ??
> ?
> >> ?
> >> ?? ????? ???? Total/Conf/Act:????? 31/ 31/ 30???????????????????????? ??
> ??
> >> ?
> >> ?? ????? ????????????????? 1111111111222222222233???????? ??????????? ??
> ?
> >> ?
> >> ?? ????? ???????? 1234567890123456789012345678901???????? ? Back ???? ??
> ?
> >> ?
> >> ?? ????? ???? TxA 111111111111111-111111111111111???????? ??????????? ??
> ?
> >> ?
> >> ?? ????? ???? TxB 000000000000000-000000000000000???????????????????? ??
> ??
> >> ?
> >> ?? ????? ???? TxC 000000000000000-000000000000000???????????????????? ??
> ?
> >> ?
> >> ?? ????? ???? TxD 111111111111111-111111111111111???????????????????? ?
> >> ?
> >> ?? ????? ???????????????????????????????????????????????? ??????????? ?
> >> ?
> >> ?? ????? ???? RxA 111111111111111-111111111111111???????? ? Loop ???? ?
> >> ?
> >> ?? ????? ???? RxB 111111111111111-111111111111111???????? ??????????? ?
> >> ?
> >> ?? ????? ???? RxC 000000000000000-000000000000000???????????????????? ?
> >> ?
> >> ?? ????? ???? RxD 111111111111111-111111111111111???????????????????? ?
> >> ?
> >> ?? ?????????????????????????????????????????????????????????????????? ?
> >> ?????
> >> ???????? ??????????????????????????????????????????????????????????????
> >>
> >>
> >>
> >> Anybody can help me?
> >>
> >> ????????????????????? Best regards,
> >>
> >> --
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100331/88ba504a/attachment.htm 


More information about the asterisk-r2 mailing list