[asterisk-r2] FW: FW: te122p con E1 telecom conmutado

omar ivan perez vargas o_i_p_v at hotmail.com
Fri Mar 5 13:27:30 CST 2010


Como estan bueno les cuento que hable con la gente de telecom y me digeron:

Piloto primario: 5939260
Tango MDE: 5939260 - 5939269
Digitos q se envian son 7

Señalizacion: MFC R2
CRC: NO

Se gun esto la variable protocolvariant=co-land,30,7,16
como quedaria????? asi???

y pues ya me entran llamadas y me salen llamadas pero se me corta en el primer timbre y me sale los siguientes errore por el cli

Cuando entra una llamada sale:
 


voip*CLI>
MFC/R2 UniCall/1      <- 0001  [1/IDLE    /Idle          /Idle         ]
MFC/R2 UniCall/1 Detected
MFC/R2 UniCall/1 Creating a new call with CRN 32770
MFC/R2 UniCall/1 1101  ->      [2/DETECTED/Seize ack     /Seize ack    ]
[Mar  5 13:11:26] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Detected
MFC/R2 UniCall/1      <- 5 on  [2/DETECTED/Seize ack     /Seize ack    ]
MFC/R2 UniCall/1 6 on  ->      [2/DETECTED/Group A       /Category req ]
MFC/R2 UniCall/1      <- 5 off [2/DETECTED/Group A       /Category req ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 6 off ->      [2/DETECTED/Group A       /Category req ]
MFC/R2 UniCall/1 R2 prot. err. [2/DETECTED/Group A       /Category req ] cause 32771 - T3 timed out
MFC/R2 UniCall/1 1001  ->      [1/IDLE    /Idle          /Idle         ]
[Mar  5 13:11:41] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure
[Mar  5 13:11:41] ERROR[5365]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32771
MFC/R2 UniCall/1 Channel echo cancel
MFC/R2 UniCall/1      <- 1001  [1/IDLE    /Idle          /Idle         ]
MFC/R2 UniCall/1 1001  ->      [1/IDLE    /Idle          /Idle         ]
voip*CLI>
 

y cuando trato de sacar llamada me sale:

 
voip*CLI>
    -- Executing [95101652 at L-DDN-DDI-CEL:1] Dial("SIP/100-c0001240", "Unicall/g1/5101652") in new stack
MFC/R2 UniCall/1 Call control(1)
MFC/R2 UniCall/1 Make call
MFC/R2 UniCall/1 Creating a new call with CRN 32769
MFC/R2 UniCall/1 0001  ->      [1/DIALING /Seize         /Idle         ]
    -- Called g1/5101652
[Mar  5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Dialing
[Mar  5 13:10:31] NOTICE[5371]: chan_unicall.c:1914 unicall_exception: Exception on 25, channel 1
MFC/R2 UniCall/1      <- 1101  [1/DIALING /Seize         /Idle         ]
MFC/R2 UniCall/1 5 on  ->      [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1      <- 1 on  [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 5 off ->      [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1      <- 1 off [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1 1 on  ->      [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1      <- 1 on  [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 1 off ->      [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1      <- 1 off [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1 0 on  ->      [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1      <- 5 on  [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1 Channel flush
MFC/R2 UniCall/1 0 off ->      [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1      <- 5 off [2/DIALING /Group I       /DNIS         ]
MFC/R2 UniCall/1 R2 prot. err. [2/DIALING /Group I       /DNIS         ] cause 32772 - Unexpected MF6 signal
MFC/R2 UniCall/1 1001  ->      [1/IDLE    /Idle          /Idle         ]
[Mar  5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure
[Mar  5 13:10:31] ERROR[5371]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32772
MFC/R2 UniCall/1 Channel echo cancel
MFC/R2 UniCall/1 Channel gains
MFC/R2 UniCall/1 Channel switching
    -- Hungup 'UniCall/1-1'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [95101652 at L-DDN-DDI-CEL:2] Hangup("SIP/100-c0001240", "") in new stack
  == Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c0001240'
MFC/R2 UniCall/1      <- 1001  [1/IDLE    /Idle          /Idle         ]
MFC/R2 UniCall/1 1001  ->      [1/IDLE    /Idle          /Idle         ]
voip*CLI>
 

que sera?

 

op
 



From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] FW: te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 13:08:17 -0500



y cuando trato de marcar por el canal me sale:
 
voip*CLI>
    -- Executing [95101652 at L-DDN-DDI-CEL:1] Dial("SIP/100-c4003530", "Unicall/g1/5101652") in new stack
[Mar  5 13:07:17] WARNING[4661]: app_dial.c:1183 dial_exec_full: Unable to create channel of type 'Unicall' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [95101652 at L-DDN-DDI-CEL:2] Hangup("SIP/100-c4003530", "") in new stack
  == Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c4003530'
voip*CLI>

 
Op
 


From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Date: Fri, 5 Mar 2010 13:06:11 -0500
Subject: [asterisk-r2] FW: te122p con E1 telecom conmutado



Hola
 
Bueno les cuento que en el balun conecte al contrario el rx y el tx y la tarjeta se coloco en verde...
 
ahora me salen:
 
[Mar  5 13:03:08] ERROR[4529]: chan_unicall.c:2522 handle_uc_event: Unicall/28 protocol error. Cause 32773
MFC/R2 UniCall/29      <- 0100  [1/BLOCKED /Idle          /Idle         ]
MFC/R2 UniCall/29 R2 prot. err. [1/BLOCKED /Idle          /Idle         ] cause 32773 - Unexpected CAS bit pattern
MFC/R2 UniCall/29 1001  ->      [1/BLOCKED /Idle          /Idle         ]

 
que significa esto???
 
gracias
 
Omar
 


From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 12:27:06 -0500



Mi configuracion
 


From: o_i_p_v at hotmail.com
To: asterisk-r2 at lists.digium.com
Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado
Date: Fri, 5 Mar 2010 11:47:55 -0500





Pues le cuento:
El canal esta actualmente conectado a una planta Alcatel OmniPCX y esta funcionando
el cable UTP sale del balun y entra al puerto de la Alcatel donde dice PBX
ese mismo cable es el que uso para conectar a mi tarjeta
Mi configuracion es:
 
zaptel.conf
 
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)
span=1,1,0,cas,hdb3
# termtype: te
cas=1-15:1101
#dchan=16
cas=17-31:1101
# Span 2: WCTDM/0 "Wildcard AEX410 Board 1"
fxsks=32
fxsks=33
fxsks=34
fxsks=35
# Global data
loadzone        = us
defaultzone     = us

 
unicall.conf
 
[channels]
language=es
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
protocolclass=mfcr2
; protocolvariant=co-land,30,1,16
protocolvariant=co-land,30,7,16
protocolend=cpe
group = 1
loglevel = 255
context= from-pstn
channel => 1-15
channel => 17-31
;skip time slot 16

 
extensions.conf
 
[from-pstn]
exten=>_.,1,Answer()
exten=>_.,n,Goto(ivr,s,1)
exten=>_.,n,Hangup
 
exten=>9260,1,Answer()
exten=>9260,n,Goto(ivr,s,1)
exten=>9260,n,Hangup

Tengo entendido q en el zapata.conf no se coloca nada del E1 pero aca les mando:
 
[trunkgroups]
[channels]
language=es
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
faxdetect=incoming
busydetect=yes
busycount=4

; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)
;group=1
;context=from-pstn
;switchtype = euroisdn
;signalling = pri_cpe
;channel => 1-31
; Span 2: WCTDM/0 "Wildcard AEX410 Board 1"
;;; line="32 WCTDM/0/0 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 32
;;; line="33 WCTDM/0/1 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 33
;;; line="34 WCTDM/0/2 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 34
;;; line="35 WCTDM/0/3 RED"
signalling=fxs_ks
callerid=asreceived
group=2
context=from-pstn
channel => 35

gracias
 		 	   		  
_________________________________________________________________
Connect to the next generation of MSN Messenger 
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100305/7c7cc176/attachment-0001.htm 


More information about the asterisk-r2 mailing list