[asterisk-r2] Protocol error

Moises Silva moises.silva at gmail.com
Thu Oct 15 15:26:09 CDT 2009


so after protocol error you cannot make more calls?
if that is the case, contact me on IRC in freenode at the openr2 channel and
we can discuss how to fix it.

On Thu, Oct 15, 2009 at 2:10 PM, Gabriel Durante
<gabriel at commlogik.com.br>wrote:

>  Hello Moy,
>
> The same problem appears after uninstalling asterisk 1.6.0.6 with manual
> patch and upgrading to asterisk 1.6.2.0-rc3.
>
>
>
> Thanks in advanced.
>
> Regards.
>
>
>
> *COMMLOGIK DO BRASIL LTDA*
>
> Gabriel Durante - Depto. Técnico
>
> Av. Dr. Guilherme Dumont Villares, 824
>
> Portal do Morumbi - São Paulo/SP/Brasil
>
> Cep: 05640-001
>
> 55+11+5503-1011 r/135
>
> gabriel at commlogik.com.br <manzini at commlogik.com.br>
>
> www.commlogik.com.br
>
>
>
> *From:* Moises Silva [mailto:moises.silva at gmail.com]
> *Sent:* quinta-feira, 15 de outubro de 2009 12:50
>
> *To:* gabriel at commlogik.com.br
> *Subject:* Re: [asterisk-r2] Protocol error
>
>
>
>  I will try to use asterisk 1.6.2.0-rc3 with embedded openr2 support but
> no promises, the last time that I’ve compiled without a manual patch I can´t
> see dahdi and mfcr2 on asterisk CLI (using Digium TE122/TE121).
>
>  I can assure you there is no problems with 1.6.2.0-rc3, give it a try. As
> I said a few weeks ago, I dropped support for 1.6.x previous to 1.6.2, is
> just too time consuming support so many releases and 1.6.2.0-rc3 should work
> pretty well.
>
>
>
>  If possible via advanced parameters,  allow the forward side to send 0x0C
> (clear back).
>
>  No, unfortunately that is not possible at this point.
>
>
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>



-- 
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20091015/938735eb/attachment.htm 


More information about the asterisk-r2 mailing list