[asterisk-r2] Problem MFC R2 - Unable to create channel of type 'UNICALL'

[Giovanni Magallanes]

Ok, I ran "module load chan_unicall.so" into Asterisk CLI and now is ok. 
But, I don't know why Asterisk do not loaded Unicall.

GM

----- Original Message ----- 
From: "Giovanni Magallanes" <gmagallanes at gmail.com>
To: <asterisk-r2 at lists.digium.com>
Sent: Tuesday, March 03, 2009 4:36 PM
Subject: Re: [asterisk-r2] Problem MFC R2 - Unable to create channel of type 
'UNICALL'


> Hi Guys,
>
> I don't know why suddenly outbound calls do not work, and I have logs from 
> Asterisk with the message: "Unable to create channel of type 'UNICALL'"
>
> [Mar  3 16:06:47] VERBOSE[6571] logger.c:  -- Executing 
> [s at macro-dialout-trunk:26] Set("SIP/102-b7830ac0", "the_num=6768567") in 
> new stack
> [Mar  3 16:06:47] DEBUG[6571] app_macro.c: Executed application: Set
> [Mar  3 16:06:47] VERBOSE[6571] logger.c:  -- Executing 
> [s at macro-dialout-trunk:27] Dial("SIP/102-b7830ac0", 
> "UNICALL/g0/6768567|300|") in new stack
>
> [Mar  3 16:06:47] WARNING[6571] app_dial.c: Unable to create channel of 
> type 'UNICALL' (cause 0 - Unknown)
> [Mar  3 16:06:47] VERBOSE[6571] logger.c:   == Everyone is busy/congested 
> at this time (1:0/0/1)
>
> [Mar  3 16:06:47] DEBUG[6571] app_macro.c: Executed application: Dial
> [Mar  3 16:06:47] VERBOSE[6571] logger.c:  -- Executing 
> [s at macro-dialout-trunk:28] Goto("SIP/102-b7830ac0", "s-CHANUNAVAIL|1") in 
> new stack
> [Mar  3 16:06:47] VERBOSE[6571] logger.c:  -- Goto 
> (macro-dialout-trunk,s-CHANUNAVAIL,1)
> [Mar  3 16:06:47] DEBUG[6571] app_macro.c: Executed application: Goto
>
> Regards,
>
> GM
>