[asterisk-r2] Issue with Asterisk and Openr2

Juan Carlos Gonzalez Cardona juancarlosg6 at gmail.com
Tue Jul 14 11:55:37 CDT 2009


ah ok, then i try with openr2.1.2.0, later i comment my experience, thanks.

2009/7/14 Moises Silva <moises.silva at gmail.com>

> On Tue, Jul 14, 2009 at 12:21 PM, Juan Carlos Gonzalez Cardona <
> juancarlosg6 at gmail.com> wrote:
>
>> Hi, i do the changes sugested by Melcon Moraes, i am monitoring if this
>> not found then i tray with the openr2.1.2.0
>>
>> 2009/7/14 Melcon Moraes <melcon at gmail.com>
>>
>>> I think you should try change:
>>>     span=1,0,0,cas,hdb3
>>> to:
>>>    span=1,1,0,cas,hdb3
>>>
>>> in your system.conf. That means the far end will provide the clock to
>>> sync, in this case, the telco as it should be.
>>>
>>> -
>>> MM
>>
>>
> Sangoma drivers ignore that setting AFAIR, the clock reference is used as
> specified in /etc/wanpipe/wanpipex.conf, either master or slave.
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
Juan Carlos Gonzalez C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090714/5e9b0ca2/attachment.htm 


More information about the asterisk-r2 mailing list