[asterisk-r2] Issue with Asterisk and Openr2

[Moises Silva]

On Tue, Jul 14, 2009 at 12:21 PM, Juan Carlos Gonzalez Cardona <
juancarlosg6 at gmail.com> wrote:

> Hi, i do the changes sugested by Melcon Moraes, i am monitoring if this not
> found then i tray with the openr2.1.2.0
>
> 2009/7/14 Melcon Moraes <melcon at gmail.com>
>
>> I think you should try change:
>>     span=1,0,0,cas,hdb3
>> to:
>>    span=1,1,0,cas,hdb3
>>
>> in your system.conf. That means the far end will provide the clock to
>> sync, in this case, the telco as it should be.
>>
>> -
>> MM
>
>
Sangoma drivers ignore that setting AFAIR, the clock reference is used as
specified in /etc/wanpipe/wanpipex.conf, either master or slave.

-- 
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090714/970c9029/attachment-0001.htm