[asterisk-r2] help!! i cant make outbound calls telco bestel
vanesa estrada
lady_vane69 at hotmail.com
Sun Dec 13 21:22:55 CST 2009
Thaks moy!!
Well the last log was with the r2test and this is with asterisk, and thaks a lot for the suggestions, i have this log with my old pbx that works with bestel:
00550 0024880 R 0000 1000 H'3 BTR2D4-108
00570 0000020 SEIZURE R 0000 1000 H'4 BTR2D4-108
00570 0000000 SEIZURE ACKN. S 0000 1011 H'4 BTR2D4-108
00580 0000010 R 0000 1000 H'4 BTR2D4-108
00770 0000190 GROUP I 3 R 0000 0011 H'2 CSR14-28
00770 0000000 A6 S 0000 0110 H'5 CSR14-28
00950 0000180 GROUP II 2 R 0000 0010 H'5 CSR14-28
00950 0000000 A1 S 0000 0001 H'8 CSR14-28
01130 0000180 GROUP I 3 R 0000 0011 H'8 CSR14-28
01130 0000000 A1 S 0000 0001 H'8 CSR14-28
01310 0000180 GROUP I 3 R 0000 0011 H'8 CSR14-28
01310 0000000 A1 S 0000 0001 H'8 CSR14-28
01490 0000180 GROUP I 3 R 0000 0011 H'8 CSR14-28
01490 0000000 A1 S 0000 0001 H'8 CSR14-28
01680 0000190 GROUP I 4 R 0000 0100 H'8 CSR14-28
01680 0000000 A1 S 0000 0001 H'8 CSR14-28
01870 0000190 GROUP I 4 R 0000 0100 H'8 CSR14-28
01870 0000000 A1 S 0000 0001 H'8 CSR14-28
02060 0000190 GROUP I 1 R 0000 0001 H'8 CSR14-28
02060 0000000 A1 S 0000 0001 H'8 CSR14-28
02260 0000200 GROUP I 10 R 0000 1010 H'8 CSR14-28
02260 0000000 A1 S 0000 0001 H'8 CSR14-28
02440 0000180 GROUP I 10 R 0000 1010 H'8 CSR14-28
02440 0000000 A1 S 0000 0001 H'8 CSR14-28
02620 0000180 GROUP I 6 R 0000 0110 H'8 CSR14-28
02620 0000000 A1 S 0000 0001 H'8 CSR14-28
02800 0000180 GROUP I 7 R 0000 0111 H'8 CSR14-28
02800 0000000 A1 S 0000 0001 H'8 CSR14-28
02980 0000180 GROUP I 15 R 0000 1111 H'8 CSR14-28
02980 0000000 A1 S 0000 0001 H'3 CSR14-28
03160 0000180 GROUP I 3 R 0000 0011 H'3 CSR14-28
03160 0000000 A1 S 0000 0001 H'3 CSR14-28
03340 0000180 GROUP I 3 R 0000 0011 H'3 CSR14-28
03340 0000000 A1 S 0000 0001 H'3 CSR14-28
03530 0000190 GROUP I 1 R 0000 0001 H'3 CSR14-28
03530 0000000 A1 S 0000 0001 H'3 CSR14-28
03720 0000190 GROUP I 7 R 0000 0111 H'3 CSR14-28
03720 0000000 A1 S 0000 0001 H'3 CSR14-28
03910 0000190 GROUP I 1 R 0000 0001 H'3 CSR14-28
03910 0000000 A1 S 0000 0001 H'3 CSR14-28
04100 0000190 GROUP I 7 R 0000 0111 H'3 CSR14-28
04100 0000000 A1 S 0000 0001 H'3 CSR14-28
04290 0000190 GROUP I 7 R 0000 0111 H'3 CSR14-28
04290 0000000 A1 S 0000 0001 H'3 CSR14-28
04460 0000170 GROUP I 7 R 0000 0111 H'3 CSR14-28
04460 0000000 A1 S 0000 0001 H'3 CSR14-28
04660 0000200 GROUP I 9 R 0000 1001 H'3 CSR14-28
08260 0003600 A3 S 0000 0011 H'5 CSR14-28
08440 0000180 GROUP II 2 R 0000 0010 H'5 CSR14-28
08440 0000000 B1 S 0000 0001 H'A CSR14-28
08620 0000180 R 0000 1000 H'5 BTR2D4-108
08630 0000010 R 0000 1000 H'6 BTR2D4-108
34250 0025620 ANSWER S 0000 1010 H'8 BTR2D4-108
34400 0000150 R 0000 1000 H'9 BTR2D4-108
and what they want its:
first dnis -> category -> all ani -> that we send "no more ani" with a F, then they send A1 asking for the rest of dnis.
I have been playing with the r2proto and im crazy i dream with a solution and i dont find it!!! where are you back moy?? :S
Date: Sat, 12 Dec 2009 00:28:04 -0500
From: moises.silva at gmail.com
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] help!! i cant make outbound calls telco bestel
On Fri, Dec 11, 2009 at 9:09 PM, vanesa estrada <lady_vane69 at hotmail.com> wrote:
Thaks!! Moises!!
I tested :S and i got the same result i make the call but the telco send a promt "the call cant be completed as dialed" here is the log:
Actually is not the same result. In your r2test log you showed us "Protocol error", in this case I don't see such thing. In fact, from a protocol point of view, there was no error, the originating side simply decided to hang up the call ( probably because the user hung up the phone when hearing the recording about the central not being able to place the call as dialed).
Something is strange though, all telcos I know of (Telmex, Axtel etc) DO NOT ask for ANI, because there is no point in asking for ANI because they know which line the call is coming from (the number assigned to the company subscriber). It seems after we send the first DNIS they ask us for category and switch to group C (Tone 6) and therefore for ANI (that's the purpose of group C in Mexico, the only country I know of with group C), then they keep requesting more ANI (tone 1) until we say, ok I have no more ANI, after that, I don't see them requesting for DNIS.
My conclusion is that this is a different MFC-R2 variant. The truth is that COFETEL in Mexico is doing nothing at all to create a standard MFC-R2 variant in Mexico and never did. At some point Telmex was the only one but as new telcos started operations, each one provides the signaling in their own terms.
At this point you have 4 choices.
1. Try to get an MFC-R2 specification from your telco and use the r2proto.conf advanced configuration to try make your telco variant to work.
2. Wait until I finish my vacations :-), try to get an MFC-R2 specification from your telco and send it to me, then as soon as I have a spare weekend I will write the new code in openr2 to make the variant work.
3. Try the following work-around that I think it may work. Set(CALLERID(num)=${EXTEN}) in your dialplan (assuming you want to dial the full ${EXTEN} number), that is, set the callerid to the number you wish to dial (this is because I suspect the problem is that they think they're requesting DNIS but we think they are requesting ANI).
4. Send me an off-list e-mail and I can give you my quote to work on this issue.
--
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
_________________________________________________________________
Descubre Windows 7
http://www.windows.com.mx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20091214/0a100999/attachment.htm
More information about the asterisk-r2
mailing list