[asterisk-r2] Elastix-1.5 Open R2

Wed Apr 1 17:10:46 CDT 2009

Aaaah I see now, thanks Melcon :-)

On Wed, Apr 1, 2009 at 5:42 PM, Melcon Moraes <melcon at gmail.com> wrote:
> Not really. He has only one span and the loopback is more likely a
> short-circuit :)
>
> TX Tip    <-------> RX Tip
> TX Ring <-------> RX Ring
>
> So, what he sends is exactly what he receives. It'll never work.
>
> Even if it was a Telco Loopback it won't work, because of the same  reason.
>
> I SEIZE one channel and instead of receiving  a SEIZE ACK I got SEIZE.
>
> You need at least 2 spans to make it work the way you thought.
>
> -MM
>
> On Wed, Apr 1, 2009 at 5:58 PM, Moises Silva <moises.silva at gmail.com> wrote:
>> if this really were a loop you would see an outgoing call along with
>> the incoming call, in your logs I only see the outgoing call which is
>> hangup because the other side refuses to accept the call.
>>
>> On Wed, Apr 1, 2009 at 4:38 PM, "ROQUÉ, Francisco Emiliano"
>> <froque at 3tech.com.ar> wrote:
>>> Thacks for all replies...Sorry for posting in Spanish...
>>>
>>> I´m using a loopback test (pins 1-->4  and 2--->5) for my TE121P with E1
>>> line... the call outgoing transforms in one incoming call.... (IVR and
>>> then QUEUE)... but It does not work yet...
>>>
>>> Debugging one call, i see:
>>>
>>>
>>> [Apr  1 17:06:11] VERBOSE[15399] logger.c:     -- Executing
>>> [s at macro-dialout-trunk:26] Dial("SIP/303-08a2fe30",
>>> "dahdi/g1/111111111222222333333|300|") in new stack
>>> [Apr  1 17:06:11] NOTICE[15399] app_dial.c: Hey! chan SIP/303-08a2fe30's
>>> context='macro-dialout-trunk', and exten='s'
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: no MFC/R2 category
>>> specified for chan DAHDI/1-1, using default National Subscriber
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - Attempting to make
>>> call (ANI=7777, DNIS=111111111222222333333, category=National Subscriber)
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Tx >> [SEIZE] 0x00
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x01
>>> [Apr  1 17:06:11] VERBOSE[15399] logger.c:     -- Called
>>> g1/111111111222222333333
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: bits changed in chan 1
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - Bits changed from
>>> 0x08 to 0x00
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Rx << [FORCED
>>> RELEASE] 0x00
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - Disconnection
>>> before seize ack detected![Apr  1 17:06:11] NOTICE[15399] chan_dahdi.c:
>>> Chan 1 - Far end disconnected. Reason: Forced Release
>>> [Apr  1 17:06:11] NOTICE[15399] chan_dahdi.c: MFC/R2 call disconnected
>>> on chan 1
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: disconnecting MFC/R2 call
>>> on chan 1
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Tx >> [CLEAR
>>> FORWARD] 0x08
>>> [Apr  1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09
>>> [Apr  1 17:06:11] VERBOSE[15399] logger.c:     -- Hungup 'DAHDI/1-1'
>>>
>>>
>>>
>>> The configuration files are:
>>>
>>> /etc/dahdi/system.conf
>>>
>>> span=1,1,0,cas,hdb3
>>>
>>> cas=1-15:1101
>>> dchan=16
>>> cas=17-31:1101
>>>
>>>
>>> loadzone        = us
>>> defaultzone     = us
>>>
>>>
>>> /etc/asterisk/chan_dahdi.conf:
>>>
>>> [channels]
>>> context=from-pstn
>>> rxwink=300              ; Atlas seems to use long (250ms) winks
>>> usecallerid=yes
>>> hidecallerid=no
>>> callwaiting=yes
>>> usecallingpres=yes
>>> callwaitingcallerid=yes
>>> threewaycalling=yes
>>> transfer=yes
>>> canpark=yes
>>> cancallforward=yes
>>> callreturn=yes
>>> echocancel=yes
>>> echocancelwhenbridged=no
>>> faxdetect=incoming
>>> echotraining=800
>>> rxgain=0.0
>>> txgain=0.0
>>> callgroup=1
>>> pickupgroup=1
>>> language=es
>>> signalling=mfcr2
>>> group=1
>>> mfcr2_variant=ar
>>> mfcr2_max_ani=10
>>> mfcr2_max_dnis=4
>>> mfcr2_logging=all
>>> channel=1-15
>>> channel=17-31
>>>
>>> immediate=no
>>>
>>> Versions:
>>>
>>> libopenr2-1.1.0-1
>>>
>>> Elastix: 1.5.9
>>>
>>> CentOS: 5.1
>>>
>>> dahdi-2.1.0.4-5
>>>
>>>
>>> Someone can help me?
>>>
>>> Regards
>>>
>>> --
>>> Ing Francisco Roqué
>>> 3Tech SRL
>>> Plaza Paso Nº92, EP B
>>> Buenos Aires, Argentina.
>>> Tel. +54 11 5252 8727
>>>     +54 221 4255116
>>> www.3tech.com.ar
>>>
>>>
>>>
>>> Gerardo Barajas wrote:
>>>> Sorry for posting in Spanish
>>>>
>>>> Samuel Goldwyn  - "I don't think anyone should write their
>>>> autobiography until after they're dead."
>>>>
>>>> 2009/4/1 Gerardo Barajas <gerardo.barajas at gmail.com
>>>> <mailto:gerardo.barajas at gmail.com>>
>>>>
>>>>     Dado que Elastix 1.5 trae dahdi y libopenr2, pues la marcacion es:
>>>>     dahdil/g0/${EXTEN}, o algo asi :P
>>>>
>>>>     Bob Hope  - "You know you are getting old when the candles cost
>>>>     more than the cake."
>>>>
>>>>     2009/4/1 "ROQUÉ, Francisco Emiliano" <froque at 3tech.com.ar
>>>>     <mailto:froque at 3tech.com.ar>>
>>>>
>>>>         Moisés, te hago una consulta.
>>>>         Estoy usando Elastix 1.5, el cuál trae soporte nativo para la
>>>>         señalización R2 justamente con openr2. La consulta es la
>>>>         siguiente:
>>>>         como sería la sintaxis del comando Dial() usando esta librería?...
>>>>         Antes con Unicall, hacía un Dial sobre Unicall/g0/${EXTEN}....
>>>>         como
>>>>         sería ahora con openr2?
>>>>
>>>>         Ya tengo configurada la placa TE121P, veo los canales con
>>>>         mfcr2 show
>>>>         channels desde la consola de asterisk en estado idle... pero no
>>>>         encuentro documentación ni mucha ayuda acerca de como crear los
>>>>         troncales y rutas salientes con esta libreria...
>>>>
>>>>         Desde ya muchas gracias
>>>>
>>>>         Saludos, Francisco
>>>>
>>>>         --
>>>>         Ing Francisco Roqué
>>>>         3Tech SRL
>>>>         Plaza Paso Nº92, EP B
>>>>         Buenos Aires, Argentina.
>>>>         Tel. +54 11 5252 8727
>>>>             +54 221 4255116
>>>>         www.3tech.com.ar <http://www.3tech.com.ar>
>>>>
>>>>
>>>>         _______________________________________________
>>>>         --Bandwidth and Colocation Provided by
>>>>         http://www.api-digital.com--
>>>>
>>>>         asterisk-r2 mailing list
>>>>         To UNSUBSCRIBE or update options visit:
>>>>           http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>> --
>> "I do not agree with what you have to say, but I’ll defend to the
>> death your right to say it." Voltaire
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2


-- 
"I do not agree with what you have to say, but I’ll defend to the
death your right to say it." Voltaire