[asterisk-ha-clustering] HA SIP configuration

[Philipp Kempgen]

Miguel Paolino schrieb:
> 2009/3/23 Ron Byer Jr. <ronb at netweave.com>:

>> I have a 2 node Asterisk (v 1.4.18) solution in what right now is an
>> active-passive configuration, utilizing heartbeat and a virtual-ip as
>> the shared resource.
>>
>> Simply put, I can easily contact the primary server using the
>> virtual-ip, but the primary server responds with it's own ip, and all
>> the SIP/SDP fields (From, Contact, etc) as well as the rtp media
>> definition use the master's IP address. This screws up the down stream
>> devices which expect to be talking to the virtual IP address.
> 
> Configure SIP on Asterisk to bind to the virtual interface, not all of
> them, this will solve it.

Right. :-) bindaddr in sip.conf. How could it not come to my mind.


    Philipp Kempgen
-- 
AMOOCON 2009, May 4-5, Rostock / Germany   ->  http://www.amoocon.de
Asterisk: http://the-asterisk-book.com - http://das-asterisk-buch.de
AMOOMA GmbH - Bachstr. 126 - 56566 Neuwied  ->  http://www.amooma.de
Geschäftsführer: Stefan Wintermeyer, Handelsregister: Neuwied B14998
--