[asterisk-ha-clustering] HA SIP configuration

[Miguel Paolino]

2009/3/23 Ron Byer Jr. <ronb at netweave.com>:
> Hi Phillip,
>
> Thanks for the fast response, I will pursue that -- I agree that the metric
> isn't used... I've run into that before.
>
> Thanks again,
>
> Ron
>
> Philipp Kempgen wrote:
>
> Philipp Kempgen schrieb:
>
>
> Ron Byer Jr. schrieb:
>
>
> I have a 2 node Asterisk (v 1.4.18) solution in what right now is an
> active-passive configuration, utilizing heartbeat and a virtual-ip as
> the shared resource.
>
> Simply put, I can easily contact the primary server using the
> virtual-ip, but the primary server responds with it's own ip, and all
> the SIP/SDP fields (From, Contact, etc) as well as the rtp media
> definition use the master's IP address. This screws up the down stream
> devices which expect to be talking to the virtual IP address.

Configure SIP on Asterisk to bind to the virtual interface, not all of
them, this will solve it.

-- 
Saludos

Miguel Paolino

"I say we blow the fuckers up." - Booger
The Revenge of the Nerds, 1984