[asterisk-gui] CallerID

[Stephen Coles]

This any good: http://www.voip-info.org/wiki/view/Asterisk+and+UK+Caller+ID
Spandsp is used for faxing and isn't used on callerid - so not need to delete asterisk
Asterisk config are stored in /etc/asterisk dir

If the above link doesn't work for you keep googling and playing it you will get it to work in the end

Stephen Coles
 IT Services
 Wellpak (UK) Ltd
Tel:

+44 (0)1386 768220

Address:

Enterprise Way
Vale Business Park
Evesham WR11 1GS

Fax:

+44 (0)1386 768300


Email:

scoles at wellpak.co.uk<mailto:scoles at wellpak.co.uk>

Website:

www.wellpak.co.uk<http://www.wellpak.co.uk>

The information contained in this message or any of its attachments may be privileged and confidential, and is intended exclusively for the addressee.
The views expressed may not be official policy, but the personal views of the originator. If you are not the addressee, any disclosure, reproduction, dissemination or use of this communication is not authorised. If you have received this message in error, please advise the sender by using the reply facility in your e-mail software.
Wellpak (UK) Limited: Registration #3124635. Registered office: Enterprise Way, Vale Business Park, Evesham WR11 1GS, England.
  P Please consider the environment before printing this email
From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-bounces at lists.digium.com] On Behalf Of Neil Peers
Sent: 14 July 2010 09:14
To: asterisk-gui at lists.digium.com
Subject: [asterisk-gui] CallerID

Thanks for the replies.
I am in the UK and do have CallerID enabled from the landline supplier (BT).Our pbx is at Atcom IP04.

Having added these commands to the zapata.conf file

cidsignalling=v23
cidstart=polarity
signalling=fxs_ks

...it looks as though I have to re-install asterisk with asterisk-spandsp.
This will then enable the Atcom box to detect the BT (British Telecom) method of CLI (which is apparently none standard to Bellcore)

Will removing the existing asterisk installation and re-installing trash all the setup parameters or are they stored in another file?

Many thanks

Neil

--
Neil Peers
Senior Engineer

IT-IS International Ltd
1 Wainstones Court
Stokesley Business Park
Stokesley
North Yorkshire
TS9 5JY
United Kingdom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20100714/312e162c/attachment.htm