[asterisk-gui] Hardware setup for channel bank

[marvin horst]

I'm thinking of replacing 'dahdi_scan > ' with 'mydahdi_scan > '  in
config/js/index.js . mydahdi_scan would be a script that would ouput the
'faked' dahdi_scan data. I don't know what parts of the output I need to
fake to get my setup working with the Asterisk GUI. I guess I want to fake a
TDM card?? This is the dahdi_scan output from my installed card:

active=yes
alarms=OK
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE121 with VPMADT032
location=PCI Bus 04 Slot 09
basechan=1
totchans=24
irq=16
type=digital-T1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF


On Fri, Nov 27, 2009 at 3:44 PM, marvin horst <marvin.horst at pbzinc.com>wrote:

> Yes, that's what I'd like to do, manually edit the conf file and then fake
> dahdi_scan. How do I go about faking dahdi_scan???
>
> The reason I was missing Span 2 was that I'm actually working in my backup
> server which has a TE121B card which only has one T1 span.
>
>
> On Fri, Nov 27, 2009 at 3:24 PM, Tzafrir Cohen <tzafrir.cohen at xorcom.com>wrote:
>
>> On Fri, Nov 27, 2009 at 02:28:12PM -0500, marvin horst wrote:
>> > Does the Asterisk GUI use dahdi_genconf to determine it's hardware
>> setup? So
>> > all I have to do is get dahdi_genconf to spit out the proper hardware
>> config
>> > for my 'unique' setup and I'm good to go?
>>
>> No, it can't really figure that out.
>>
>> But let's look at something different:
>>
>> if you already have FXS and FXO channels, why should the GUI care how
>> they were created?
>>
>> The ugly way to trick the GUI: fake the output of dahdi_scan as if you
>> have analog channels. From this point on it wouldn't really care.
>>
>>
-- 
Marvin Horst
IT Manager
Paul B Zimmerman Inc
(717) 738-7365 x824
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20091127/b5e3f8bd/attachment.htm