[asterisk-gui] Hardware setup for channel bank

[marvin horst]

I'm taking another look at this issue. I was considering using FreePBX which
allows you to manually configure zaptel.conf or dahdi/system.conf. It also
allows/forces you to enter each hardware channel individually. But I would
really prefer to use the Asterisk GUI because it appears to allow more
custom control of the dial plan, and I like the layout better.

I was looking through the code trying to find where I could possibly hack
around the hardware config to 'fake' having a TDM2400P(mixed 24 port analog)
instead of a T1 card. Could someone point me in the general direction of
where I would do this in the code? Or maybe this isn't a good idea ???

On Tue, Jun 16, 2009 at 11:03 AM, Ryan Brindley <rbrindley at digium.com>wrote:

> Marvin,
> The Asterisk-GUI is flexible enough to handle your "unique" dialplan
> features, but its just the Hardware config that its a little strict on.
> Generally, you can configure you're hardware however you'd like and the GUI
> will do its best to recognize your configuration (according to its
> assumptions). But you're request is that it do something outside of its
> assumptions, which is, split a T1's ports for users and trunks that is not
> being split by the T1 card itself. The GUI just doesn't handle that
> condition (because it doesn't support your channel bank that is doing the
> splitting).
>
> That would be a cool feature to have, however, it is probably a rare case
> and not something that seems feasible to add to the project. If you need any
> help though, we'll do what we can. :-)
>
>
> --
> Ryan Brindley
> Digium, Inc. | Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> main: +1 256-428-6000   fax: +1 256-864-0464
> Check us out at: http://digium.com & http://asterisk.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20091127/025c568a/attachment.htm