[asterisk-gui] Dial tone

[Bob Crandell]

On Sat, 2009-02-28 at 16:22 +0000, Neil Stone wrote:

> Bob Crandell wrote:
> > On Sat, 2009-02-28 at 01:38 +0000, Neil Stone wrote:
> >> Bob Crandell wrote:
> >> > Which panel does that?
> >> > 
> >> > On Sat, 2009-02-28 at 00:17 +0000, Neil Stone wrote:
> >> > Bob Crandell wrote:
> >> >> Hi again,
> >> > 
> >> >> So many pent up questions.
> >> > 
> >> >> Digium card with one FXO and one FXS daughter.  Asterisk-gui
> >> >> detected hardware ok. Working down the panels on the left:
> >> >> Configure Hardware worked There is no mISDN to config Added a trunk
> >> >> pointing to the FXO port Outgoing Calling Rules pointed to that
> >> >> trunk Added Dial Plan Added 2 users.
> >> > 
> >> >> I was assuming I should be able to connect an analog phone and hear
> >> >>  a dial tone but I don't.  What did I miss?
> >> > 
> >> >> BTW, these 2 users can call each other with softphones.
> >> > 
> >> >> Thanks -- Bob Crandell
> >> > 
> >> > 
> >> > Did you add an extension for the FXS port ?
> >> >
> >>
> >> The add user one.. there is a section that mentiones the analogue port
> >> to use..
> > Yes.  I did that.
> > 
> > At the risk of showing what a noobie I am, Does the handset plug into
> > the port with the red card or the green one?
> 
> green

Ok.  I had the wires wrong.

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090302/a275ef32/attachment.htm