<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.10.0">
</HEAD>
<BODY>
On Sat, 2009-02-28 at 16:22 +0000, Neil Stone wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
<FONT COLOR="#000000">Bob Crandell wrote:</FONT>
<FONT COLOR="#000000">> On Sat, 2009-02-28 at 01:38 +0000, Neil Stone wrote:</FONT>
<FONT COLOR="#000000">>> Bob Crandell wrote:</FONT>
<FONT COLOR="#000000">>> > Which panel does that?</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> > On Sat, 2009-02-28 at 00:17 +0000, Neil Stone wrote:</FONT>
<FONT COLOR="#000000">>> > Bob Crandell wrote:</FONT>
<FONT COLOR="#000000">>> >> Hi again,</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> >> So many pent up questions.</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> >> Digium card with one FXO and one FXS daughter. Asterisk-gui</FONT>
<FONT COLOR="#000000">>> >> detected hardware ok. Working down the panels on the left:</FONT>
<FONT COLOR="#000000">>> >> Configure Hardware worked There is no mISDN to config Added a trunk</FONT>
<FONT COLOR="#000000">>> >> pointing to the FXO port Outgoing Calling Rules pointed to that</FONT>
<FONT COLOR="#000000">>> >> trunk Added Dial Plan Added 2 users.</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> >> I was assuming I should be able to connect an analog phone and hear</FONT>
<FONT COLOR="#000000">>> >> a dial tone but I don't. What did I miss?</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> >> BTW, these 2 users can call each other with softphones.</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> >> Thanks -- Bob Crandell</FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> > </FONT>
<FONT COLOR="#000000">>> > Did you add an extension for the FXS port ?</FONT>
<FONT COLOR="#000000">>> ></FONT>
<FONT COLOR="#000000">>></FONT>
<FONT COLOR="#000000">>> The add user one.. there is a section that mentiones the analogue port</FONT>
<FONT COLOR="#000000">>> to use..</FONT>
<FONT COLOR="#000000">> Yes. I did that.</FONT>
<FONT COLOR="#000000">> </FONT>
<FONT COLOR="#000000">> At the risk of showing what a noobie I am, Does the handset plug into</FONT>
<FONT COLOR="#000000">> the port with the red card or the green one?</FONT>
<FONT COLOR="#000000">green</FONT>
</PRE>
</BLOCKQUOTE>
Ok. I had the wires wrong.<BR>
<BR>
Thanks
</BODY>
</HTML>