[asterisk-gui] Dialing out

[Bob Crandell]

Hi,

I have since reinstalled this a few times trying to understand
relationships, permissions and such like.  Now I'm ready to dial out
again.  This time there is an error:  Call failed:  603 Declined
asterisk -vvvvvvr
Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty'
for details.
This is free software, with components licensed under the GNU General
Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf': Found
  == Parsing '/etc/asterisk/extconfig.conf': Found
Connected to Asterisk 1.4.21.2 currently running on asterisk (pid =
13857)
Verbosity is at least 6

    -- Executing [96899159 at DLPN_DialPlan1:1] Macro("SIP/6002-08227968",
"trunkdial-failover-0.3|Zap/g1/5551212||trunk_1|trunk_1") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:1]
Set("SIP/6002-08227968", "CALLERID(num)=") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:2]
GotoIf("SIP/6002-08227968", "0?1-dial|1") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:3]
Set("SIP/6002-08227968", "CALLERID(all)=") in new stack
    -- Executing [s at macro-trunkdial-failover-0.3:4]
Goto("SIP/6002-08227968", "1-dial|1") in new stack
    -- Goto (macro-trunkdial-failover-0.3,1-dial,1)
    -- Executing [1-dial at macro-trunkdial-failover-0.3:1]
Dial("SIP/6002-08227968", "Zap/g1/5551212") in new stack
[Feb 27 11:58:07] WARNING[29008]: app_dial.c:1183 dial_exec_full: Unable
to create channel of type 'Zap' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [1-dial at macro-trunkdial-failover-0.3:2]
GotoIf("SIP/6002-08227968", "0 > 0 ?1-CHANUNAVAIL|1:1-out|1") in new
stack
    -- Goto (macro-trunkdial-failover-0.3,1-out,1)
    -- Executing [1-out at macro-trunkdial-failover-0.3:1]
Hangup("SIP/6002-08227968", "") in new stack
  == Spawn extension (macro-trunkdial-failover-0.3, 1-out, 1) exited
non-zero on 'SIP/6002-08227968' in macro 'trunkdial-failover-0.3'
  == Spawn extension (macro-trunkdial-failover-0.3, 1-out, 1) exited
non-zero on 'SIP/6002-08227968'

This is a test box.  I'm the only one on it.
One Digium TDM400P with one FXO and one FXS daughter card.

Thanks
-  
Bob Crandell
Assured Computing, Inc.
http://www.assuredcomp.com/
541-868-0331
ComputerBase
http://www.computerbaseusa.com/
541-349-0404


On Tue, 2009-02-17 at 14:05 -0600, Ryan Brindley wrote:
> Bob,
> If you're in Asterisk's CLI, make sure you have verbosity past 3
> ('core set verbose 3') and then try to make an outbound call. You
> should see a bit of dialplan scroll on the screen and look for errors
> there. Copy and paste em here if you find any and don't know what to
> do.
> --                 
> Ryan Brindley                 
> Digium, Inc. | Software Developer                 
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA                 
> main: +1 256-428-6000   fax: +1 256-864-0464                 
> Check us out at: http://digium.com & http://asterisk.org
> 
> ----- Original Message -----
> From: "Bob Crandell" <bob at assuredcomp.com>
> To: "Asterisk GUI" <asterisk-gui at lists.digium.com>
> Sent: Tuesday, February 17, 2009 1:30:07 PM GMT -06:00 US/Canada
> Central
> Subject: [asterisk-gui] Dialing out
> 
> Hi All,
> 
> Fresh install.  There are 2 Digium cards, 1 with 2 FXO ports and 1
> with
> 2 FXS ports.  These show up in "Configure Hardware".  I added a trunk
> with these ports, configured Outgoing Calling Rules, setup a dial plan
> that included everything and added 2 users which can call each other.
> 
> Neither user can call out.  There are no errors in the log that I can
> see.
> 
> What did I miss?
> 
> Thanks
> -- 
> Bob Crandell
> Assured Computing, Inc.
> http://www.assuredcomp.com/
> 541-868-0331
> ComputerBase
> http://www.computerbaseusa.com/
> 541-349-0404
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090227/6c1e6912/attachment.htm