[asterisk-gui] Dialing out

[Ryan Brindley]

Bob, 
If you're in Asterisk's CLI, make sure you have verbosity past 3 ('core set verbose 3') and then try to make an outbound call. You should see a bit of dialplan scroll on the screen and look for errors there. Copy and paste em here if you find any and don't know what to do. 
-- 
Ryan Brindley 
Digium, Inc. | Software Developer 
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA 
main: +1 256-428-6000 fax: +1 256-864-0464 
Check us out at: http://digium.com & http://asterisk.org 

----- Original Message ----- 
From: "Bob Crandell" <bob at assuredcomp.com> 
To: "Asterisk GUI" <asterisk-gui at lists.digium.com> 
Sent: Tuesday, February 17, 2009 1:30:07 PM GMT -06:00 US/Canada Central 
Subject: [asterisk-gui] Dialing out 

Hi All, 

Fresh install. There are 2 Digium cards, 1 with 2 FXO ports and 1 with 
2 FXS ports. These show up in "Configure Hardware". I added a trunk 
with these ports, configured Outgoing Calling Rules, setup a dial plan 
that included everything and added 2 users which can call each other. 

Neither user can call out. There are no errors in the log that I can 
see. 

What did I miss? 

Thanks 
-- 
Bob Crandell 
Assured Computing, Inc. 
http://www.assuredcomp.com/ 
541-868-0331 
ComputerBase 
http://www.computerbaseusa.com/ 
541-349-0404 

_______________________________________________ 
--Bandwidth and Colocation Provided by http://www.api-digital.com-- 

asterisk-gui mailing list 
To UNSUBSCRIBE or update options visit: 
http://lists.digium.com/mailman/listinfo/asterisk-gui 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20090217/628ca0bb/attachment.htm