[asterisk-gui] Service Provider Options

Brandon Kruse bkruse at digium.com
Wed Jun 11 17:10:58 CDT 2008


You may be right, let me check that out.

-brandon
----- Original Message -----
From: "Trevor Benson" <tbenson at a-1networks.com>
To: "Asterisk GUI project discussion" <asterisk-gui at lists.digium.com>
Sent: Wednesday, June 11, 2008 4:30:00 PM GMT -06:00 US/Canada Central
Subject: Re: [asterisk-gui] Service Provider Options

Already replaced mine with the secondary.  It also appears that asterisk GUI is using the old primary server instead of the one that took over after 12/04/2007.  Here is an excerpt from Bandwidth.com from back in late November 2007.

> PBX Configurations required for Bandwidth.com Outbound SIP Trunks:
> * Bandwidth.com Primary gateway IP: 4.79.212.236:5060 SIP/UDP
> * Bandwidth.com Secondary gateway IP: 216.82.224.202 SIP/UDP
> *******************Starting 12/4/07***********************
> * Bandwidth.com Primary outbound gateway IP: 216.82.224.202:5060 SIP/
> UDP
> * Bandwidth.com Secondary outbound gateway IP: 216.82.225.202 SIP/UDP

So it looks like the 4.79.212.236 should be updated to 216.82.224.202

Thanks,
Trevor

> -----Original Message-----
> From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
> bounces at lists.digium.com] On Behalf Of Andrew Latham
> Sent: Tuesday, June 10, 2008 4:49 PM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Service Provider Options
> 
> providers.conf or users.conf is a great place to start...
> 
> 
> On Tue, Jun 10, 2008 at 7:40 PM, Trevor Benson <tbenson at a-
> 1networks.com> wrote:
> > Just realizing that of the defined service providers there is no way
> to alter the defaults in the GUI.  For example:
> >
> > I would assume the default Bandwidth.com service provider definition
> is using bandwidth.com's primary SIP server.  I get about 60-80ms to
> this server, however their new secondary server I get 4ms to.  I would
> much prefer to have the option to select which of the 2 servers to use
> (especially with my inbound provisioning from bandwidth.com coming from
> this server as well, and not the primary).  Edit just gives me the
> selection screen again, and advanced loads some options, but not the
> host to be modified, which would be a simple way to do it.
> >
> > Thanks,
> > Trevor Benson
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-gui mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-gui
> >
> 
> 
> 
> --
> Andrew "lathama" Latham
> Principal
> TuxTone Inc.
> http://TuxTone.com
> Andrew.Latham at TuxTone.com
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-gui

-- 
******************************
Brandon Kruse
Software Technician
Digium, Inc.
150 West Park Loop, Suite 100
Huntsville, AL 35806
Phone: +1-256-428-6115
877.546.8963
877.linux.me!
www.digium.com
www.asterisk.org
******************************



More information about the asterisk-gui mailing list