[asterisk-gui] IAX and SIP

Trevor Benson tbenson at a-1networks.com
Wed Jan 16 09:44:13 CST 2008


Yeah I just hacked it into the iax.conf temporarily.  The client is finally coming to terms that playing around in the GUI while beta isn't what they should be doing while trying to run a production system.  So until the GUI is final release were just going to configure the system by hand like normal.  Unfortunately their 800 is setup with a provider they were using on Trixbox so until its ported its sort of stuck.

Thanks for the help and love where the GUI is going.
Trevor


> -----Original Message-----
> From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
> bounces at lists.digium.com] On Behalf Of bkruse
> Sent: Tuesday, January 15, 2008 1:57 PM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] IAX and SIP
> 
> This, is not the GUI's fault.
> 
> It is coming in as 'teliax' instead of your username, therefore the gui
> cannot match it.
> 
> I would suggest using one of the service providers recommended, they
> all
> work.
> 
> however, with a little tweaking, you could get this to work easily.
> 
> -bk
> 
> Trevor Benson wrote:
> > Here is the IAX2 debug information.
> >
> >
> > Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX
> Subclass: NEW
> >    Timestamp: 00014ms  SCall: 00253  DCall: 00000
> [207.174.202.2:4569]
> >    VERSION         : 2
> >    CALLED NUMBER   : 800590xxxx
> >    CODEC_PREFS     : (g729|ulaw|g726|gsm)
> >    CALLING NUMBER  : 707570xxxx
> >    CALLING PRESNTN : 0
> >    CALLING TYPEOFN : 0
> >    CALLING TRANSIT : 0
> >    CALLING NAME    : A-1 NET SOLUTIO
> >    LANGUAGE        : en
> >    USERNAME        : teliax
> >    FORMAT          : 4
> >    CAPABILITY      : 59654
> >    ADSICPE         : 2
> >    DATE TIME       : 2008-01-15  12:08:32
> >
> > [Jan 15 11:13:44] NOTICE[4521]: chan_iax2.c:7344 socket_process:
> Rejected connect attempt from 207.174.202.2, who was trying to reach
> '800590xxxx@'
> > Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00014ms  SCall: 00002  DCall: 00253
> [207.174.202.2:4569]
> > Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: REJECT
> >    Timestamp: 00015ms  SCall: 00002  DCall: 00253
> [207.174.202.2:4569]
> >    CAUSE           : No authority found
> >    CAUSE CODE      : 50
> >
> > Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00015ms  SCall: 00253  DCall: 00002
> [207.174.202.2:4569]
> > Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX
> Subclass: NEW
> >    Timestamp: 00002ms  SCall: 00425  DCall: 00000
> [207.174.202.2:4569]
> >    VERSION         : 2
> >    CALLED NUMBER   : 800590xxxx
> >    CODEC_PREFS     : (g729|ulaw|g726|gsm)
> >    CALLING NUMBER  : 707570xxxx
> >    CALLING PRESNTN : 0
> >    CALLING TYPEOFN : 0
> >    CALLING TRANSIT : 0
> >    CALLING NAME    : A-1 NET SOLUTIO
> >    LANGUAGE        : en
> >    USERNAME        : teliax
> >    FORMAT          : 4
> >    CAPABILITY      : 59654
> >    ADSICPE         : 2
> >    DATE TIME       : 2008-01-15  12:08:32
> >
> > [Jan 15 11:13:44] NOTICE[4514]: chan_iax2.c:7344 socket_process:
> Rejected connect attempt from 207.174.202.2, who was trying to reach
> '800590xxxx@'
> > Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00002ms  SCall: 00003  DCall: 00425
> [207.174.202.2:4569]
> > Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: REJECT
> >    Timestamp: 00019ms  SCall: 00003  DCall: 00425
> [207.174.202.2:4569]
> >    CAUSE           : No authority found
> >    CAUSE CODE      : 50
> >
> > Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00019ms  SCall: 00425  DCall: 00003
> [207.174.202.2:4569]
> > Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX
> Subclass: NEW
> >    Timestamp: 00013ms  SCall: 00598  DCall: 00000
> [207.174.202.2:4569]
> >    VERSION         : 2
> >    CALLED NUMBER   : 800590xxxx
> >    CODEC_PREFS     : (g729|ulaw|g726|gsm)
> >    CALLING NUMBER  : 707570xxxx
> >    CALLING PRESNTN : 0
> >    CALLING TYPEOFN : 0
> >    CALLING TRANSIT : 0
> >    CALLING NAME    : A-1 NET SOLUTIO
> >    LANGUAGE        : en
> >    USERNAME        : teliax
> >    FORMAT          : 4
> >    CAPABILITY      : 59654
> >    ADSICPE         : 2
> >    DATE TIME       : 2008-01-15  12:08:32
> >
> > [Jan 15 11:13:44] NOTICE[4518]: chan_iax2.c:7344 socket_process:
> Rejected connect attempt from 207.174.202.2, who was trying to reach
> '800590xxxx@'
> > Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00013ms  SCall: 00004  DCall: 00598
> [207.174.202.2:4569]
> > Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: REJECT
> >    Timestamp: 00011ms  SCall: 00004  DCall: 00598
> [207.174.202.2:4569]
> >    CAUSE           : No authority found
> >    CAUSE CODE      : 50
> >
> > Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00011ms  SCall: 00598  DCall: 00004
> [207.174.202.2:4569]
> > Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX
> Subclass: NEW
> >    Timestamp: 00013ms  SCall: 00438  DCall: 00000
> [207.174.202.2:4569]
> >    VERSION         : 2
> >    CALLED NUMBER   : 800590xxxx
> >    CODEC_PREFS     : (g729|ulaw|g726|gsm)
> >    CALLING NUMBER  : 707570xxxx
> >    CALLING PRESNTN : 0
> >    CALLING TYPEOFN : 0
> >    CALLING TRANSIT : 0
> >    CALLING NAME    : A-1 NET SOLUTIO
> >    LANGUAGE        : en
> >    USERNAME        : teliax
> >    FORMAT          : 4
> >    CAPABILITY      : 59654
> >    ADSICPE         : 2
> >    DATE TIME       : 2008-01-15  12:08:38
> >
> > [Jan 15 11:13:50] NOTICE[4515]: chan_iax2.c:7344 socket_process:
> Rejected connect attempt from 207.174.202.2, who was trying to reach
> '800590xxxx@'
> > Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00013ms  SCall: 00005  DCall: 00438
> [207.174.202.2:4569]
> > Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX
> Subclass: REJECT
> >    Timestamp: 00011ms  SCall: 00005  DCall: 00438
> [207.174.202.2:4569]
> >    CAUSE           : No authority found
> >    CAUSE CODE      : 50
> >
> > Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX
> Subclass: ACK
> >    Timestamp: 00011ms  SCall: 00438  DCall: 00005
> [207.174.202.2:4569]
> >
> >
> >> -----Original Message-----
> >> From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
> >> bounces at lists.digium.com] On Behalf Of bkruse
> >> Sent: Monday, January 14, 2008 11:23 AM
> >> To: Asterisk GUI project discussion
> >> Subject: Re: [asterisk-gui] IAX and SIP
> >>
> >>
> >> The problem chan_iax is giving you, is an error because
> >> that user is calling in as a guest (because the context is
> configured
> >> out by the user entry)
> >>
> >> eg  (trimmed)
> >> [6001]
> >> context=blah
> >>
> >> Then calls come into 8005551234 at blah
> >>
> >> I need iax2 debug so I can see why the registration is failing.
> >>
> >> -bk
> >>
> >> Trevor Benson wrote:
> >>
> >>> Having a few issues in Custom voip with SNV Revision: 2131.  When
> >>>
> >> inbound SIP calls come in I get a "Failed to authenticate user "A-1
> NET
> >> SOLUTIO" <sip:xxxxxxxx" well thats the Caller ID from teliax being
> sent
> >> along.  Not really used to setting users.conf manually so not sure
> what
> >> it could be, as it seems self explanatory compared to the old
> sip.conf,
> >> and i dont see anything obviously wrong.
> >>
> >>> IAX gives me the error  chan_iax2.c:7344 socket_process: Rejected
> >>>
> >> connect attempt from 207.174.202.2, who was trying to reach
> >> '8005551234@' (number replaced for mailing list) but nothing after
> the
> >> @.  If I set inbound rules for ANY unrecognized AND the actual
> number
> >> from this provider to route somewhere, it still says rejecting
> connect
> >> attempt.
> >>
> >>> Willing to debug, but want to bring up the line as well so I will
> >>>
> >> place it into the system the old way by hand if need be.
> >>
> >>> Thanks,
> >>> Trevor
> >>>
> >>> PS.  This is a client that is so gungho about the asterisk-gui and
> >>>
> >> they just want it in production in beta anyway.  We can pretty much
> do
> >> any direct conf editing to resolve problems, but otherwise I
> wouldn't
> >> be worried about connecting this line and getting it working.
> >>
> >>> Thanks
> >>>
> >>> _______________________________________________
> >>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>>
> >>> asterisk-gui mailing list
> >>> To UNSUBSCRIBE or update options visit:
> >>>    http://lists.digium.com/mailman/listinfo/asterisk-gui
> >>>
> >>>
> >> _______________________________________________
> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>
> >> asterisk-gui mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-gui
> >>
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-gui mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-gui
> >
> 
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui



More information about the asterisk-gui mailing list