[asterisk-gui] asterisk Gui and mISDN / Digital Card Support

[Christian]

I agree with Andrew,  if we would cover 70% Percent for E1/T1 cards 
settings and nearly 90% of BRI cards setups (there's not so much config 
options for BRI, which are *really* important). It would be much better 
than covering 0% of digital cards like we do now ;)



bkruse wrote:
>
> Andrew,
>
> This is exactly what I plan on doing.
>
> The problem comes in when people put down esf,b8zs and their
> span does not come out of red alarm, its the GUI's fault.
>
> But I think im going to make a team branch and start hacking at
> it if anyone wants to beta test the stuff.
>
> It will be pretty awesome when its done. I think this will be
> a huge step for the GUI as a whole.
>
> -bkruse
>
>
> Andrew Latham wrote:
>> What about the standard setup
>>
>> /etc/zaptel.conf
>> span=X,X,X,esf,b8zs
>> bchan=1-23
>> dchan=24
>>
>> /etc/asterisk/zapata.conf
>> signalling=pri_cpe
>> channel => 1-23
>>
>> and maybe some like options for channel bank and such.  that way you
>> cover some of the bases for 70% of the users
>>
>>
>> On 5/10/07, bkruse <bkruse at digium.com> wrote:
>>>
>>> Hey Christian!
>>>
>>> Well, im going to go on a little soap box here.
>>>
>>> Me and Pari have been discussing all digital card integration.
>>> Unfortunately, unlike zapscan and analog cards such as the tdm400p,
>>> you cannot automatically detect what is what.
>>>
>>> The only thing I see possible after looking into it ( I looked into
>>> being able to autodetect the framing and what not, and just got
>>> over my head, it would be very difficult, maybe I will take that in
>>> as a pet project later.....)
>>>
>>> So my conclusion is that we can set it up so that it will edit
>>> zapata.conf and make trunks for you to dial out and come in.
>>>
>>> The user/admin will have to setup the card themselves, as we can
>>> only do so much to set it up.
>>>
>>>
>>> Any ideas/contributions would be great.  I just need to talk out
>>> some of these ideas, because it would be awesome to have all
>>> digital cards supported in the GUI. We also talked about having a
>>> drop down box saying "hey, what card do you have out of this list"
>>> but we can only do so much, the user/admin will HAVE to be able to
>>> know what framing, mode, etc, the card will be in.
>>>
>>> That kind of make sense?
>>>
>>> Let me know what you guys think!!
>>>
>>> -bkruse
>>>
>>> Christian wrote:
>>> > Hi all,
>>> >
>>> > is there any plan in supporting mISDN with the Asterisk Gui ?
>>> >
>>> > cheers,
>>> >
>>> > Christian
>>> >
>>> > _______________________________________________
>>> > --Bandwidth and Colocation provided by Easynews.com --
>>> >
>>> > asterisk-gui mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> >   http://lists.digium.com/mailman/listinfo/asterisk-gui
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-gui mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-gui
>>>
>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-gui
>
>