[asterisk-gui] Problem setup/install.htm Again Rev 1146.

[Maurício Magalhães]

  when the problem occurs . (page refresh all time and in the middle i only
get black space)
in my console asterisk -vr, show:

Connected to Asterisk 1.4.8 currently running on intersrv01 (pid = 6378)
Verbosity is at least 3
  == Parsing '/etc/asterisk/manager.conf': Found
  == HTTP Manager 'admin' logged on from 10.8.0.13
  == Parsing '/etc/asterisk/extensions.conf': Found
    -- Executing [executecommand at asterisk_guitools:1] Answer("
Local/executecommand at asterisk_guitools-498d,2", "") in new stack
[Jul 21 18:53:16] WARNING[6427]: pbx.c:5138 ast_pbx_outgoing_app:
Local/executecommand at asterisk_guitools-498d,1 already has a call record??
    -- Executing [executecommand at asterisk_guitools:2] Hangup("
Local/executecommand at asterisk_guitools-498d,2", "") in new stack
  == Spawn extension (asterisk_guitools, executecommand, 2) exited non-zero
on 'Local/executecommand at asterisk_guitools-498d,2'
    -- Executing [executecommand at asterisk_guitools:1] Answer("
Local/executecommand at asterisk_guitools-08ba,2", "") in new stack
[Jul 21 18:53:17] WARNING[6435]: pbx.c:5138 ast_pbx_outgoing_app:
Local/executecommand at asterisk_guitools-08ba,1 already has a call record??
    -- Executing [executecommand at asterisk_guitools:2] Hangup("
Local/executecommand at asterisk_guitools-08ba,2", "") in new stack
  == Spawn extension (asterisk_guitools, executecommand, 2) exited non-zero
on 'Local/executecommand at asterisk_guitools-08ba,2'
  == Parsing '/etc/asterisk/extensions.conf': Found
    -- Executing [executecommand at asterisk_guitools:1] Answer("
Local/executecommand at asterisk_guitools-6b29,2", "") in new stack
[Jul 21 18:53:31] WARNING[6454]: pbx.c:5138 ast_pbx_outgoing_app:
Local/executecommand at asterisk_guitools-6b29,1 already has a call record??
    -- Executing [executecommand at asterisk_guitools:2] Hangup("
Local/executecommand at asterisk_guitools-6b29,2", "") in new stack
  == Spawn extension (asterisk_guitools, executecommand, 2) exited non-zero
on 'Local/executecommand at asterisk_guitools-6b29,2'
    -- Executing [executecommand at asterisk_guitools:1] Answer("
Local/executecommand at asterisk_guitools-1b4f,2", "") in new stack
[Jul 21 18:53:32] WARNING[6462]: pbx.c:5138 ast_pbx_outgoing_app:
Local/executecommand at asterisk_guitools-1b4f,1 already has a call record??
    -- Executing [executecommand at asterisk_guitools:2] Hangup("
Local/executecommand at asterisk_guitools-1b4f,2", "") in new stack
  == Spawn extension (asterisk_guitools, executecommand, 2) exited non-zero
on 'Local/executecommand at asterisk_guitools-1b4f,2'
  == Parsing '/etc/asterisk/extensions.conf': Found
    -- Executing [executecommand at asterisk_guitools:1] Answer("
Local/executecommand at asterisk_guitools-a80d,2", "") in new stack
[Jul 21 18:53:46] WARNING[6481]: pbx.c:5138 ast_pbx_outgoing_app:
Local/executecommand at asterisk_guitools-a80d,1 already has a call record??


On 7/21/07, Maurício Magalhães <maciommagalhaes at gmail.com> wrote:
>
> Hi Frederico
>
> Where i configure? in /etc/asterisk/modules.conf ? if it will be this,
> then it did not work, I continue the same with error
>
> load => app_system.so
>
> MY MODULES.CONF
> ===============================
> [modules]
> autoload=yes
>
> load => app_system.so
> noload => pbx_gtkconsole.so
> noload => pbx_kdeconsole.so
>
> load => res_musiconhold.so
> noload => chan_alsa.so
> ===============================
> Tanks
>
> Mauricio
>  On 7/21/07, Federico Lovison <federico.l at tiscali.it> wrote:
> >
> > Hi Mauricio,
> >
> > do you have "app_system.so" loaded in Asterisk when you try to use the
> > GUI?
> > I got the same problem, and this was solved loading this module.
> >
> > However, after solving this issue I got another problem:
> >
> > the trunk configuration gave me an error, saying that a file was missing
> > (extensions.conf ), while that file
> > was actually in the /etc/asterisk directory.
> > I tried to comment the "TRUNKMSD=1" at the beginning of the file and..
> > the wizard was able to complete and the GUI seemed to work fine.
> >
> > However, it was not working fine as the gui was able to create the
> > extensions and the dialplans correctly, but the trunks were incomplete
> > because for instance the variable "TRUNK_1=SIP/trunk_1" was not set and the
> > dialplan was not working (as it tried to call  "/123456" instead of
> > "SIP/trunk_1/123456").
> > When I set the "TRUNK_1=SIP/trunk_1" manually.. then the GUI stopped
> > working again, redirecting me to the wizard.
> >
> > Do you have any idea about how to fix this?
> >
> > Thank you!!
> >
> > Federico
> >
> >
> > Maurício Magalhães wrote:
> > > I just got, the default page, but the buttons are activate but dont
> > > work and the page refresh all time and in the middle i only get black
> > > space.
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-gui mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-gui
> >
>
>
>
> --
> Maurício




-- 
Maurício
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-gui/attachments/20070721/868e2099/attachment.htm