[asterisk-gui] Configuring a PRI, Provider

[bkruse]

Andrew,

Have you had any success?

-bk

Andrew Latham wrote:
> I am setting up the GUI for testing on a PRI.  I want to slide the
> channels from the PRI into the GUI and also the channels for a Rhino
> Channel bank in to the GUI.  I know that this is a hot topic and I
> have a question.
>
> Could a ZAP provider be created?  I assume from looking at
> providers.conf that this is currently not possible but I think that
> this would be an easy way of adding a typical PRI to satisfy a good
> deal of the PRI needs and the channel bank would be cake.
>
> This is just a wild idea so shoot it down or talk about it......
>
>
> [PRI]
> providername = Ma Bell
> providerlogo = images/mabell.jpg
> protocol = zap
> providerdesc = A standard ISDN PRI.  23 B-Channels, 1 D-Channel
> hasiax =  no
> hassip = no
> haszap = yes
> registeriax = no
> registersip = no
> signalling=pri_cpe
> channel = 1-23
> d-channel = 24
>
> [ChannelBank]
> providername = Rhino
> providerlogo = images/rhinocb.jpg
> protocol = zap
> providerdesc = A standard Channel bank, 24 FXS
> hasiax =  no
> hassip = no
> haszap = yes
> registeriax = no
> registersip = no
> signaling = fxo_ls
> channel = 25-48
>
>