[asterisk-gui] Cannot Set NAT/Qualify for User

[Pari Nannapaneni]

You are right. As of now, the GUI has only admin login.
There is no support for individual user login.

regards,
-pari


Sales at MichianaWireless.Com wrote:
> Hello,
> 
> I am working with a new installation and I was wondering after reading this
> if there is a self service interface for clients to login and adjust there
> settings and check voicemail etc via the web?
> 
> Thanks,
> John
> 
>> -----Original Message-----
>> From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
>> bounces at lists.digium.com] On Behalf Of George Pajari
>> Sent: Monday, January 29, 2007 8:26 AM
>> To: asterisk-gui at lists.digium.com
>> Subject: Re: [asterisk-gui] Cannot Set NAT/Qualify for User
>>
>> Pari:
>>>  >> without outside users. We need to add the nat and qualify settings
>> to
>>>  >> the Advanced tab for users.
>>>
>>> Our goal for the time being is to achieve a basic stable version of the
>> GUI
>>> with all the basic PBX functions and then improve on from there....
>>>
>> Agreed 100%!
>>
>> Stability is far far more important. And I will try to get you some
>> patches. Near the top of my list (I think) will be a "do no harm" edict
>> for the GUI. In other words, if the (say) qualify setting is manually
>> set, the GUI should not remove it. Settings that the GUI is not yet
>> equipped to change at least ought to be preserved.
>>
>> g.
>>