[asterisk-gui] Cannot Set NAT/Qualify for User

[Sales at MichianaWireless.Com]

Hello,

I am working with a new installation and I was wondering after reading this
if there is a self service interface for clients to login and adjust there
settings and check voicemail etc via the web?

Thanks,
John

> -----Original Message-----
> From: asterisk-gui-bounces at lists.digium.com [mailto:asterisk-gui-
> bounces at lists.digium.com] On Behalf Of George Pajari
> Sent: Monday, January 29, 2007 8:26 AM
> To: asterisk-gui at lists.digium.com
> Subject: Re: [asterisk-gui] Cannot Set NAT/Qualify for User
> 
> Pari:
> >  >> without outside users. We need to add the nat and qualify settings
> to
> >  >> the Advanced tab for users.
> >
> > Our goal for the time being is to achieve a basic stable version of the
> GUI
> > with all the basic PBX functions and then improve on from there....
> >
> 
> Agreed 100%!
> 
> Stability is far far more important. And I will try to get you some
> patches. Near the top of my list (I think) will be a "do no harm" edict
> for the GUI. In other words, if the (say) qualify setting is manually
> set, the GUI should not remove it. Settings that the GUI is not yet
> equipped to change at least ought to be preserved.
> 
> g.
> 
> --
> George Pajari, netVOICE communications    604 484 VOIP (484 8647 x102)
> Open Source VoIP/Telephony Specialists  1 877 NET VOIP (638 8647 x102)
>                   www.netvoice.ca  www.ip-centrex.ca
>       www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-gui