[Asterisk-doc] extensions.conf section
david
asterisk-doc@lists.digium.com
Tue, 6 Jan 2004 11:42:53 -0800
This is a multi-part message in MIME format.
------=_NextPart_000_058B_01C3D44A.38220D50
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
Hi everyone, I'm brand new to Asterisk, but I do have a lot of =
familiarity with both legacy and IP PBX systems. I've been using =
Asterisk (with enthusiasm!) for the just a couple months. I am =
interested in helping however I can to assist in the documentation =
effort to make Asterisk accessible to a wider audience. =20
My learning curve that allowed me to get a small system running in a =
basic fashion with a variety of phones (analog and IP) was based largely =
on previous experience in these areas. As you know, it's not easy for =
someone just starting. I think that the right "administrator" and then =
"phone user" documents could give Asterisk a big boost in usability. =
Here is an outline of the detailed notes I have compiled so far with the =
idea of getting our internal IT group to setup an Asterisk system in =
another office at some point in the near future. =20
I'm looking at Jared's recent outline and making comments relative to =
his outline where possible. You can see where my experience fizzles out. =
I would be very happy to contribute to these sections but am not =
currently setup with any of the documentation tools you seem to be using =
(I'm a PC/Windows developer).
Section 1 - Setting up Platform: PC and OS
1.1 PC requirements
1.2 Digium hardware requirements
1.3 Steps to setup Red Hat 9 (other section for other OS's)
1.4 Installing Zaptel Hardware
1.4.1 Brief intro to Asterisk .conf files
1.4.2 Using VI or some editor
1.4.3 Brief intro to signalling (FXS, FXO, etc.)
1.4.4 /etc/zaptel.conf
1.4.5 /etc/asterisk/zapata.conf
1.5 Basic PSTN Service Setup
1.5.1 Installing Asterisk behind CO Trunks
1.5.2 Installing Asterisk behind T1/E1
1.5.3 Installing Asterisk behind ISDN/PRI
1.5.4 Installing Asterisk behind Legacy PBXs
Section 2 - Basic Asterisk Configuration=20
2.1 extensions.conf =20
2.1.1 contexts
2.1.2 extensions
2.1.3 priorities
2.1.4 wildcards
2.1.5 special extensions (i,s,h,t)
2.2 Dialplan parsing
2.2.1 Basic Example(s)
2.3 Variables
2.3.1 Call Variables
2.3.2 Global Variables
2.3.3 Example(s)
2.4 Macros
2.4.1 Intro
2.4.2 Macro Attributes
2.4.3 Example(s)
2.5 voicemail.conf
2.5.1 Intro to VM
2.5.2 Notification options
2.5.3 Example(s)
2.6 sip.conf
2.6.1 Intro to SIP
2.6.2 Brief description of SIP phone options
2.6.3 Snom200 Example
2.6.4 Cisco ATA-186 Example
2.6.5 Cisco 7960 Example
???? other examples
Section 3 - Basic Operation
3.1 Starting the system
3.1.1 Loading modules (modprobe, ztcfg)
3.2 Starting Asterisk
3.2.1 -v, -c, -d, -h, -q, -f, -C
3.2.2 Connect to a running asterisk (-r -x -n)
=20
3.3 Using Common Asterisk Commands
3.3.1 show applications
3.3.2 show application abcd
3.3.3 reload
3.3.4 show dialplan
3.3.5 sip show peers
3.3.6 sip show channels
3.3.7 stop gracefully
3.3.8 stop now
Section 4 Asterisk Commands and Applications
4.1 Asterisk Dialplan Applications
4.1.1 Intro =20
4.1.2 Common Useful Application Examples
4.1.7.1 StripMSD
4.1.7.2 Prefix
4.1.7.3 Dial
4.1.7.4 MeetMe (include meetme.conf description)
4.1.7.5 Background
4.1.7.6 Playback
4.1.7.7 VoiceMail2
4.1.7.8 VoiceMailMain2
4.1.7.9 Hangup
???? others =20
4.1.3 Complete list of apps with brief description
4.1.4 Getting syntax help for Asterisk apps
=20
4.2 Complete list of Asterisk Interactive commands
4.2.1 General Commands
4.2.2 Server Management
4.2.3 AGI Commands
4.2.4 Database Commands
4.2.5 IAX Channel Commands
4.2.6 SIP Channel Commands
4.2.7 ZAP Channel Commands
4.2.8 MGCP Channel Commands
4.2.9 Skinny Channel Commands
Section 5 - Phone Setup
5.1 Analog extension=20
5.1.1 Edit /etc/asterisk/zapata.conf
5.1.2 Assign signalling (e.g., fxo_ks)
5.1.3 Assign context
5.1.4 Assign channels
5.1.5 Assign groups
5.1.6 Assign callerid
5.1.7 Edit voicemail.conf
5.3 Snom200 phone setup example
5.3.1 Edit sip.conf=20
5.3.2 Edit voicemail.conf
5.3.3 Power up steps
5.3.4 Registration steps
5.3.5 Browser configuration
=20
5.4 Cisco 7960 phone setup example
5.4.1 Setup TFTP Server (freeware)
5.4.2 Order proper SIP firmware
5.4.3 Upgrade to 2.3 if necessary on TFTP Server
5.4.3.1 OS79XX.TXT
5.4.3.2 SEPDefault.cnf
5.4.3.3 SEPmacaddress.cnf
5.4.3.4 RINGLIST.DAT
5.4.3.5 ringer1.pcm
5.4.3.6 ringer2.pcm
5.4.3.7 P0S30203.bin
5.4.3.8 Manual steps to configure phone
5.4.5 Upgrade to 6.0 if necessary
5.4.5.1 OS79XX.TXT
5.4.5.2 SIPDefault.cnf
5.4.5.3 SIPmacaddress.cnf
5.4.5.4 RINGLIST.DAT
5.4.5.5 ringer1.pcm
5.4.5.6 ringer2.pcm
5.4.5.7 P0S3-06-3-00.bin
5.4.5.8 P0S3-06-3-00.sbn
5.4.5.9 Manual steps to configure phone
5.4.7 Edit sip.conf
5.4.8 Edit voicemail.conf
=20
5.5 ATA-186/188 setup example
5.5.? See John Todd's excellent notes on this
5.X ???? additional phone setup examples
Section 6 - IAX Setup
Section 7 - AGI Scripting
=20
Section 8 - Call Queuing
Section 9 - Complete Asterisk conf File Reference
Section 10 - Useful Linux Commands and Apps
cd
pwd
ls -l
du -b -c
shutdown -h now
less
more
???
=20
Section 11 - CDR Setup and Access for 3rd Party Apps
Section 12 - Scale and Operation Issues
12.1 Load Testing and PC limits
12.2 Echo Issues
12.3 QOS Issues
12.4 Scalability
12.? ?????
Section 13 - Console
Section 14 - NAT and VoIP
Section 15 - Database
Section 16 - Errata
Best Regards,
David Schlossman
=20
------=_NextPart_000_058B_01C3D44A.38220D50
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dwindows-1252">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3D"Courier New" size=3D2>Hi everyone, I'm brand new to =
Asterisk, but=20
I do have a lot of familiarity with both legacy and IP PBX systems.=20
I've been using Asterisk (with enthusiasm!) for the just a couple=20
months. I am interested in helping however I can to assist in the=20
documentation effort to make Asterisk accessible to a wider =
audience. =20
</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>My learning curve that allowed =
me to get a=20
small system running in a basic fashion with a variety of phones (analog =
and IP)=20
was based largely on previous experience in these areas. As you =
know, it's=20
not easy for someone just starting. I think that the right =
"administrator"=20
and then "phone user" documents could give Asterisk a big boost in=20
usability. Here is an outline of the detailed notes I have =
compiled=20
so far with the idea of getting our internal IT group to setup an =
Asterisk=20
system in another office at some point in the near future. =
</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>I'm looking at Jared's recent =
outline and=20
making comments relative to his outline where possible. You can see =
where my=20
experience fizzles out. I would be very happy to contribute to =
these=20
sections but am not currently setup with any of the documentation tools =
you seem=20
to be using (I'm a PC/Windows developer).</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New"><FONT =
size=3D2>Section 1 </FONT><FONT=20
size=3D2> - Setting up Platform: PC and OS</FONT></FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 1.1 PC=20
requirements</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 1.2 =
Digium hardware=20
requirements</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 1.3 Steps =
to setup=20
Red Hat 9 (other section for other OS's)</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 1.4 =
Installing=20
Zaptel Hardware</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.4.1=20
Brief intro to Asterisk .conf files</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.4.2=20
Using VI or some editor</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.4.3=20
Brief intro to signalling (FXS, FXO, etc.)</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.4.4=20
/etc/zaptel.conf</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
1.4.5 /etc/asterisk/zapata.conf</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 1.5 Basic =
PSTN=20
Service Setup</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.5.1=20
Installing Asterisk behind CO Trunks</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.5.2=20
Installing Asterisk behind T1/E1</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.5.3 Installing=20
Asterisk behind ISDN/PRI</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 1.5.4=20
Installing Asterisk behind Legacy PBXs</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New"><FONT size=3D2>Section 2</FONT><FONT =
size=3D2> -=20
Basic Asterisk Configuration </FONT></FONT></DIV>
<DIV><FONT face=3D"Courier New"><FONT=20
size=3D2> 2.1 extensi=
ons.conf</FONT><FONT=20
size=3D2> </FONT></FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 2.1.1=20
contexts</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 2.1.2=20
extensions</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 2.1.3=20
priorities</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 2.1.4=20
wildcards</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.1.5 special extensions (i,s,h,t)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
2.2 Dialplan parsing</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.2.1 Basic Example(s)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 2.3 =20
Variables</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.3.1 Call Variables</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.3.2 Global Variables</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.3.3 Example(s)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 2.4 =
Macros</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.4.1 Intro</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.4.2 Macro Attributes</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 2.4.3=20
Example(s)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 2.5=20
voicemail.conf</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.5.1 Intro to VM</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.5.2 Notification options</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.5.3 Example(s)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
2.6 sip.conf</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.6.1 Intro to SIP</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.6.2 Brief description of SIP phone options</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.6.3 Snom200 Example</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.6.4 Cisco ATA-186 Example</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
2.6.5 Cisco 7960 Example</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; ????=20
other examples</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 3 - Basic =
Operation</FONT></DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
3.1 Starting the system</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.1.1 Loading modules (modprobe, ztcfg)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 3.2 Startin=
g=20
Asterisk</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.2.1 -v, -c, -d, -h, -q, -f, -C</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 3.2.2=20
Connect to a running asterisk (-r -x -n)</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2> =
=20
</FONT></DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
3.3 Using Common Asterisk Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.3.1 show applications</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.3.2 show application abcd</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.3.3 reload</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 3.3.4=20
show dialplan</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.3.5 sip show peers</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.3.6 sip show channels</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
3.3.7 stop gracefully</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 3.3.8=20
stop now</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 4 Asterisk =
Commands and=20
Applications</FONT></DIV><FONT face=3D"Courier New" size=3D2>
<DIV><FONT =
size=3D2> 4.1=20
Asterisk Dialplan Applications</FONT></DIV>
<DIV><FONT=20
size=3D2> &nbs=
p; =20
4.1.1 Intro</FONT><FONT =
size=3D2> </FONT></DIV>
<DIV> &n=
bsp; 4.1.2=20
Common Useful Application Examples</DIV>
<DIV> &n=
bsp; 4.1.7.1=20
StripMSD</DIV>
<DIV> &n=
bsp; 4.1.7.2=20
Prefix</DIV>
<DIV> &n=
bsp; 4.1.7.3=20
Dial</DIV>
<DIV> =20
&=
nbsp; 4.1.7.4=20
MeetMe (include meetme.conf description)</DIV>
<DIV> &n=
bsp; =20
4.1.7.5 Background</DIV>
<DIV> &n=
bsp; 4.1.7.6=20
Playback</DIV>
<DIV> &n=
bsp; 4.1.7.7=20
VoiceMail2</DIV>
<DIV> &n=
bsp; 4.1.7.8=20
VoiceMailMain2</DIV>
<DIV> &n=
bsp; 4.1.7.9=20
Hangup</DIV>
<DIV> &n=
bsp; ????=20
others </DIV>
<DIV>
<DIV><FONT=20
size=3D2> &nbs=
p; 4.1.3=20
Complete list of apps with brief description</FONT></DIV>
<DIV> &n=
bsp; 4.1.4=20
Getting syntax help for Asterisk=20
apps</DIV> &nb=
sp; </DIV>
<DIV> <FONT face=3D"Courier New"=20
size=3D2> 4.2 Complete =
list of=20
Asterisk Interactive commands</FONT>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
4.2.1 General Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
4.2.2 Server Management</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 4.2.3=20
AGI Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
4.2.4 Database Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 4.2.5=20
IAX Channel Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; 4.2.6=20
SIP Channel Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
4.2.7 ZAP Channel Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
4.2.8 MGCP Channel Commands</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
4.2.9 Skinny Channel Commands</FONT></DIV></DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV>Section 5 - Phone Setup</DIV>
<DIV> 5.1 Analog =
extension=20
</DIV>
<DIV> &n=
bsp; 5.1.1=20
Edit /etc/asterisk/zapata.conf</DIV>
<DIV> &n=
bsp; 5.1.2=20
Assign signalling (e.g., fxo_ks)</DIV>
<DIV> &n=
bsp; 5.1.3=20
Assign context</DIV>
<DIV> &n=
bsp; 5.1.4=20
Assign channels</DIV>
<DIV> &n=
bsp;=20
5.1.5 Assign groups</DIV>
<DIV> &n=
bsp; 5.1.6=20
Assign callerid</DIV>
<DIV> =20
5.1.7 Edit=20
voicemail.conf</DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV> 5.3 Snom200 =
phone=20
setup example</DIV>
<DIV>
<DIV> =20
5.3.1 Edit=20
sip.conf </DIV>
<DIV> &n=
bsp;=20
5.3.2 Edit voicemail.conf</DIV>
<DIV> &n=
bsp; 5.3.3=20
Power up steps</DIV>
<DIV> &n=
bsp;=20
5.3.4 Registration steps</DIV>
<DIV> &n=
bsp; 5.3.5=20
Browser configuration</DIV>
<DIV> =
</DIV></DIV>
<DIV> 5.4 Cisco =
7960 phone=20
setup example</DIV>
<DIV> &n=
bsp;=20
5.4.1 Setup TFTP Server (freeware)</DIV>
<DIV> &n=
bsp;=20
5.4.2 Order proper SIP firmware</DIV>
<DIV> &n=
bsp; 5.4.3=20
Upgrade to 2.3 if necessary on TFTP Server</DIV>
<DIV> &n=
bsp; =20
5.4.3.1 OS79XX.TXT</DIV>
<DIV> &n=
bsp; =20
5.4.3.2 SEPDefault.cnf</DIV>
<DIV> &n=
bsp; 5.4.3.3=20
SEPmacaddress.cnf</DIV>
<DIV> &n=
bsp; 5.4.3.4=20
RINGLIST.DAT</DIV>
<DIV> &n=
bsp; 5.4.3.5=20
ringer1.pcm</DIV>
<DIV> &n=
bsp; 5.4.3.6=20
ringer2.pcm</DIV>
<DIV> &n=
bsp; =20
5.4.3.7 P0S30203.bin</DIV>
<DIV> &n=
bsp; =20
5.4.3.8 Manual steps to configure phone</DIV>
<DIV> &n=
bsp; 5.4.5=20
Upgrade to 6.0 if necessary</DIV>
<DIV> &n=
bsp; =20
5.4.5.1 OS79XX.TXT</DIV>
<DIV> &n=
bsp; =20
5.4.5.2 SIPDefault.cnf</DIV>
<DIV> &n=
bsp; 5.4.5.3=20
SIPmacaddress.cnf</DIV>
<DIV> &n=
bsp; =20
5.4.5.4 RINGLIST.DAT</DIV>
<DIV> &n=
bsp; =20
5.4.5.5 ringer1.pcm</DIV>
<DIV> &n=
bsp; 5.4.5.6=20
ringer2.pcm</DIV>
<DIV> &n=
bsp; 5.4.5.7=20
P0S3-06-3-00.bin</DIV>
<DIV> &n=
bsp; =20
5.4.5.8 P0S3-06-3-00.sbn</DIV>
<DIV> =20
=
5.4.5.9=20
Manual steps to configure phone</DIV>
<DIV> &n=
bsp;=20
5.4.7 Edit sip.conf</DIV>
<DIV> &n=
bsp; 5.4.8=20
Edit voicemail.conf</DIV>
<DIV> &n=
bsp; =20
</DIV>
<DIV> 5.5 =
ATA-186/188 setup=20
example</DIV>
<DIV> &n=
bsp; 5.5.?=20
See John Todd's excellent notes on this</DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV> 5.X ???? =
additional phone=20
setup examples</DIV>
<DIV><FONT face=3DArial></FONT> </DIV></FONT>
<DIV><FONT face=3D"Courier New" size=3D2>Section 6 - IAX =
Setup</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 7 - AGI =
Scripting</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2> </FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 8 - Call =
Queuing</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 9 - Complete =
Asterisk=20
conf File Reference</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 10 - Useful Linux =
Commands and=20
Apps</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2> =
=20
cd</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> pwd</FONT></DIV>=
<DIV><FONT face=3D"Courier New"=20
size=3D2> ls =
-l</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> du -b =
-c</FONT></DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
shutdown -h now</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> less</FONT></DIV=
>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
more</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> ???</FONT></DIV>=
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 11 - CDR Setup and =
Access for=20
3rd Party Apps</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 12 - Scale and =
Operation=20
Issues</FONT></DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
12.1 Load Testing and PC limits</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 12.2 Echo=20
Issues</FONT></DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
12.3 QOS Issues</FONT></DIV>
<DIV><FONT face=3D"Courier New" =
size=3D2> =20
12.4 Scalability</FONT></DIV>
<DIV><FONT face=3D"Courier New"=20
size=3D2> 12.? =
?????</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 13 - =
Console</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 14 - NAT and =
VoIP</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 15 - =
Database</FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2>Section 16 - =
Errata<BR></FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2></FONT> </DIV>
<DIV><FONT face=3D"Courier New" size=3D2><FONT face=3DArial>Best=20
Regards,</FONT></FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2><FONT face=3DArial>David=20
Schlossman</FONT></FONT></DIV>
<DIV><FONT face=3D"Courier New" size=3D2><FONT =
face=3DArial></FONT> </DIV></FONT>
<DIV><FONT face=3D"Courier New"=20
size=3D2> &nbs=
p; =20
</FONT></DIV></BODY></HTML>
------=_NextPart_000_058B_01C3D44A.38220D50--