[asterisk-dev] SIP: So you mean you want to be able to *dial* something?

[Olle E. Johansson]

7 mar 2013 kl. 15:43 skrev Joshua Colp <jcolp at digium.com>:

> I'm back!
> 
> First off I want to thank everyone for their comments and the discussion that occurred.
> 
> I think in the end I'm going to settle for a compromise based on all the various thoughts and opinions.
> 
> Dialing an endpoint or AOR directly will only cause one target to be dialed. If you want to support multiple contacts for an AOR (whether to allow this or not is configurable) you will need to use the dialplan function to produce a suitable dial string. The issues pointed out by others (call forwarding for one) are just too great to push this logic into the SIP work. I consider this a first step into this new area that will make quite a few people happy with no immediate impact to the core.
> 
> For deployments that need to individually address devices the normal approach of individual endpoint configurations for each is still a viable and supported option. The above work does not impact this at all.
> 
I do hope that you allow multiple contacts with the same +sip.instance or with different address families.

/O