[asterisk-dev] [Code Review] Dahdi FXS line polarity reversal when remote party Answers and/or Hangups

[Alec Davis]

-----------------------------------------------------------
This is an automatically generated e-mail. To reply, visit:
https://reviewboard.asterisk.org/r/797/
-----------------------------------------------------------

(Updated 2010-07-22 16:06:38.073213)


Review request for Asterisk Developers.


Changes
-------

Document polarity callbacks


Summary
-------

Quoting armeniki:
"FXS lines normally connect to a telephone. However, when FXS lines are routed to an external PBX or Key System to act as "external" or "CO" lines, it is extremely difficult, if not impossible for the external PBX to know when the call has been disconnected without receiving a polarity reversal on the line."

Implementation was to use existing keywords as used for FXO modules 'answeronpolityswitch' and 'hanguponpolarityswitch', with a similar function for the FXS module but from the Legacy PBX's point of view.


This addresses bug 17318.
    https://issues.asterisk.org/view.php?id=17318


Diffs (updated)
-----

  trunk/channels/chan_dahdi.c 278424 
  trunk/channels/sig_analog.h 278424 
  trunk/channels/sig_analog.c 278424 

Diff: https://reviewboard.asterisk.org/r/797/diff


Testing
-------

Using TDM800P FXS modules:

Inbound and outbound calls, using answeronpolarityswitch and hanguponpolarityswitch 


Thanks,

Alec